复合材料元件吸能能力的数值模拟

运用MSC／DYTRAN有限元软件，对碳纤维一环氧树脂“┼”字型、“┬”字型、“┐”字型3种典型复合材料元件的破坏过程、峰值栽荷、平均栽荷和能量吸收能力进行了数值模拟研究。鉴于MSC／DYTRAN有限元软件不能直接用于复合材料的吸能分析，分析时采用了等效的方法。将复合材料结构元件的数值计算结果与准静态轴向压溃试验的结果进行对比，两者较为一致，从而说明运用该有限元软件并采用等效的方法模拟复合材料结构吸能能力的可行性。     

Phase Space Density Analysis of Energy Transport in the Earth’s Magnetotail

Two energetic events in the Earth’s magnetotail detected by Geotail are examined with detailed analysis of three-dimensional velocity phase space density. It is found that the occurrence of multiple ion components is high during these dynamic episodes. Different populations evolve independently of each other, suggesting particles from multiple activity sites contributing to the observed phase space density. The transport properties with consideration of multiple components are evaluated, with the result showing significant differences from those based on a single fluid approach. This comparison indicates that precise evaluation of the energy and magnetic flux transport of energetic events in the magnetotail requires resolving individual populations in the phase space density.     

An equilibrium multi-objective optimum design for non-circular clearance hole of disk with discrete variables

An Equilibrium Multi-objective Optimization Model(EMOM) with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk. In the ‘‘equilibrium design", both the stress decrease around the hole and the least hole's profile variation are considered, which balances two ambivalent design goals. Specific discrete variables are applied to realize the standardization design in the optimization process, in which a Surrogate Genetic Coding Algorithm(SGCA) is introduced, and a special check module is used to get rid of repeated fitness evaluation of the samples. The method offers an equilibrium design for the non-circular clearance hole of the turbine disk with great accuracy and efficiency.     

Plastic wrinkling prediction in thin-walled part forming process:A review

The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac-tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli-cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the current prediction methods were summa-rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic-explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com-plex thin-walled structures’ part in aviation and aerospace field, the trends and challenges in wrin-kling prediction under complicated boundary conditions are presented.     

振动时效在铝合金薄壁件加工过程中的应用

介绍了振动时效法消除残余应力的机理,通过进行振动前后残余应力测试,验证了振动时效在铝合金薄壁件加工中的有效性,通过进行振动时效在薄壁件加工过程中的工艺,运用试验,得出振动时效在薄壁件加工中的应用方案.     

飞机大部件自动对接同步调姿方法

提出了飞机大部件自动对接同步调姿方法,实现了大部件调姿基准点的连续自动跟踪测量和位姿连续调整.在此基础上开发了集测量场构建、大部件位姿解算和调整等功能于一体的大部件自动对接集成控制软件,并在ARJ21飞机翼身自动对接现场进行了应用试验,结果证明该方法能有效完成飞机翼身自动对接过程,提高测量和对接效率.     

基于双三次B样条插值的薄壁件加工误差补偿方法

以薄壁件加工过程为研究对象,针对薄壁件加工的误差预测、补偿问题,提出一种基于双三次B样条插值的薄壁件加工误差补偿方法.在获得薄壁件历史加工数据的基础上,运用插值理论建立误差模型,得到误差分布规律,考虑切削力与弹性变形之间的迭代影响建立误差补偿方法.该方法综合考虑了弹性变形、热误差、几何误差等多种误差源,通过数值分析方法建立误差模型,避免以往薄壁件误差建模中误差源分析不全、解析困难的弊端,最终以薄板工件为例,通过实验验证,应用该误差补偿方法可有效提高薄壁件的加工精度.     

基于自定义组件的故障诊断过程显示

针对导弹控制系统结构复杂,信号线繁多,难以在故障诊断软件设计中实现诊断过程图形化实时显示的问题,提出了一种基于自定义组件开发故障诊断软件的方法.根据导弹控制系统的故障诊断流程及实时显示需要,对其结构进行了分析,抽象出了主要组成元素--信号通道和部件,由此提出了需要定义的相应组件.用Borland C Builder6.0开发环境进行了应用实践,证明使用这种方法可快速开发出能图形化实时显示故障诊断过程的导弹控制系统故障诊断软件,开发出的软件还具有运行稳定、修改升级方便等优点.     

薄壁件多点柔性加工变形的分析和控制研究

针对开发薄壁件多点柔性工装系统的需求,研究薄壁件多点柔性铣削加工中的变形问题,运用有限元软件ABAQUS对零件的实际加工过程进行模拟仿真.多点柔性工装系统采用布局,分析吸盘边距和吸盘真空度对薄壁件加工变形的影响.通过改变A、B、C三组吸盘的真空度建立三因素四水平正交试验,总结出A、B、C三组吸盘分别调整真空度至-0.5bar、-0.8bar、-0.5bar能够获得更小的平均变形量,对多点柔性工装系统控制薄壁件的加工变形方面给出了建议.     

气浮运动组件内外球面的角摆静压力自动补偿研磨方法

根据磁悬浮零部件专用测量机气浮运动组件内外球面的高精度技术要求,设计一种角摆静压力自动补偿万向球头节研磨机构,在普通车床上采用内外球面自动研磨的方法代替传统手工对研.实践证明提高了气浮运动组件的研磨质量和效率,有一定参考价值.