Unsteady wakes-secondary flow interactions in a high-lift low-pressure turbine cascade

Detailed experimental measurements were conducted to study the interactions between incoming wakes and endwall secondary flow in a high-lift Low-Pressure Turbine (LPT) cascade. All of the measurements were conducted in both the presence and absence of incoming wakes, and numerical analysis was performed to elucidate the flow mechanism. With increasing Reynolds number, the influence of the incoming wakes on suppressing the secondary flow gradually increased owing to the greater influence of incoming wakes on reducing the negative incidence angle at higher Reynolds numbers, leading to a lower blade loading near the leading edge and suppression of the Pressure Side (PS) leg of the horseshoe vortex. However, the effect of unsteady wakes on suppressing the profile losses gradually became weaker owing to the reduced size of the Suction Side (SS) separation bubble and increased mixing loss in the free-flow region at high Reynolds numbers. Incoming wakes clearly improved the aerodynamic performance of the low-pressure turbine cascade at low Reynolds numbers of 25,000 and 50,000. In contrast, at the high Reynolds number of 100,000, the profile loss at the midspan and mass-averaged total losses downstream of the cascade were higher in the presence of wakes than in the absence of wakes, and the unsteady wakes exerted a negative influence on the aerodynamic performance of the LPT cascade.     

空间飞行体与等离子体在压缩区内的非稳态相互作用研究

研究了空间飞行体在运动过程中，其前端压缩区内飞行体与等离子体的、非稳态相互作用问题，得到了在强天线辐射源高频场作用下的控制方程．通过计算表明，飞行体上的天线可作为调制不稳定性的激发源，在等离子体中激发起很强的电磁孤波．     

弓激波前内透射离子动力学横场流静电不稳定性

本文讨论了地球弓激波前内背景电子速度分布函数为平顶形式时的透射离子横场流静电不稳定性.结果表明,在超临界(Alfvén Mach数M_A>3)准垂直激波区(激波法向与行星际磁场之间的夹角75°)情况下,透射离子流产生的静电不稳定性增长率峰值要比电子速度为Maxwell分布时更加显著,并满足动力学性质.     

W型发动机双轴摆动故障的排除

简要介绍了DPF－2型控制系统在W型发动机上的应用，分析了该系统在使用过程中出现的双轴摆动现象，对整个系统的稳定性进行了探讨，采取措施解决了该发动机双轴摆动故障并进行了试验验证。该研究对进一步完善该型发动机的燃油控制系统有一定的参考作用。     

固冲发动机补燃室流场的实验校测

1引言目前数值模拟已广泛应用到火箭发动机的流场分析中,特别是固冲发动机补燃室的燃烧和流动[1,2]。但是这种方法在固冲发动机补燃室应用的有效性还没有合适的实验验证。国外开展的补燃室流动实验大多以水为介质,用片光流动显示的方法观察流场的概貌,与真实发动机的流动之间存     

吸力面翼刀对压气机叶栅内二次流的影响

1引言在叶轮机械叶栅内流动控制中,可以通过在叶片吸力面、端壁上安装翼刀或隔片,控制二次流的发展,降低二次流损失,其中将翼刀加装在吸力面上的控制方式即为吸力面翼刀控制技术。吸力面翼刀主要是通过阻断端壁附面层和叶片吸力面附面层近端壁处低能流动沿吸力面的展向迁移来对     

磁层亚暴膨胀相的近地触发模型

本文指出现有亚暴的中性线模型其源区在赤疲乏面上离地球太远；以ＧＥＯＳ－２的观测资料为依据，提出了亚暴膨胀相的一个近地触发模型－气球模不稳定性模型，该模型认为，在增长相期间到达Ｒ≈（６－１０）ＲＥ的近地等离子体片内边缘区，出现指向地球方向的离子压强梯度，越尾电流强度增大，磁力线向磁尾拉伸。当等离子体片变薄，电子沉降增强，极光带电离层电导率骤增时，气球模不稳定性在近地等离子体片内边缘区被激发，场向电流     

直升机“地面共振”力学模型的探讨

 <正> I_B 桨叶绕垂直铰的转动惯量I_(?),I_(?),I_(?) 机身绕过其重心O的x,y,z 轴的转动惯量ι 桨叶长度m_B 单片桨叶的质量     

Flow mechanism between purge flow and mainstream in different turbine rim seal configurations

The rim seal is used to prevent mainstream ingestion to the gap between the vane of a turbine and its blade. In this article, the dolphin lip with a hook configuration and a large seal cavity with hook structures are designed based on the high-pressure turbine datum single shark lip rim seal configuration. The sealing effect and parameters of the flow field are measured by an experiment method and a numerical simulation is used to explain the mechanism. For three configurations, the effect of the leakage slot vortex on the efficiency of the seal and the influence of leakage vortex, generated by the interaction between purge flow and mainstream flow, are discussed in depth. The result shows that the reverse vortex formed by the dolphin lip rim seal with hook structure will increase the sealing efficiency. The seal configuration with a large cavity improves sealing efficiency to a greater extent than the datum structure. At different purge flow rates and with unequal seal structures, the purge flow produces three types of leakage vortices in the passage. Besides, the seal configuration with dolphin lip produces a Kelvin-Helmholtz instability at the interface of the purge and the mainstream flows at a low purge flow rate to induce new leakage vortex branches in the passage of the blade.     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.