考虑胶层蠕变行为的胶接结构有限元分析

本文考虑胶层材料的蠕变行为，采用模拟岩层纹理单元的有限元法，分析工程中使用的典型胶接结构的应力场和位移场。数值结果表明，胶层蠕变行为对胶接结构位移和应力场均有较大影响     

复合材料胶接连接工艺

文中叙述了胶接工艺应具备的条件,复合材料胶接连接工艺特点和质量控制等内容。     

铝/ZN-1阻尼材料复合结构件的粘接技术研究

探讨了胶黏剂黏度、硬铝表面处理方式及硅烷偶联剂KH-560的使用方式等因素对硬铝板/ZN-1阻尼材料复合结构件的粘接性能的影响。研究表明：如果硬铝板表面采用砂纸打磨处理时，采用黏度较低的TC-1环氧树脂胶或者在黏度较高的J-22环氧树脂胶中添加2％的硅烷偶联剂KH-560可以获得优异的粘接效果；当硬铝板表面采用铬酸阳极化处理时，两种胶黏剂均能获得优异的粘接效果。     

复合材料锥壳0°铺层的自动铺放成型方法研究

研究了一种基于自动铺带技术的复合材料锥壳0°铺层成型方法：根据锥壳构件尺寸将等宽预浸带数控分切成预定尺寸的直角梯形预浸带片，按特定方式铺放到锥壳表面并使每两片拼成一个等腰梯形单元，多个等腰梯单元形构成锥壳的0°铺层；并针对这种成型方法设计了一种实现锥壳0°铺层自动成型的装置。采用该方法及其设备可以实现锥壳0°铺层的自动化制造，提高成型效率、降低废料率、稳定工艺质量，降低装备制造成本。     

耐高温聚酰亚胺胶黏剂的研究进展

综述了近年来耐高温聚酰亚胺胶黏剂的研究发展状况，对聚酰亚胺胶黏剂尤其是加成型聚酰亚胺胶黏剂的化学合成方法和胶黏剂结构与性能的关系进行了分析与总结，并对耐高温聚酰亚胺胶黏剂的应用和未来发展趋势进行了展望。     

Flow mechanism between purge flow and mainstream in different turbine rim seal configurations

The rim seal is used to prevent mainstream ingestion to the gap between the vane of a turbine and its blade. In this article, the dolphin lip with a hook configuration and a large seal cavity with hook structures are designed based on the high-pressure turbine datum single shark lip rim seal configuration. The sealing effect and parameters of the flow field are measured by an experiment method and a numerical simulation is used to explain the mechanism. For three configurations, the effect of the leakage slot vortex on the efficiency of the seal and the influence of leakage vortex, generated by the interaction between purge flow and mainstream flow, are discussed in depth. The result shows that the reverse vortex formed by the dolphin lip rim seal with hook structure will increase the sealing efficiency. The seal configuration with a large cavity improves sealing efficiency to a greater extent than the datum structure. At different purge flow rates and with unequal seal structures, the purge flow produces three types of leakage vortices in the passage. Besides, the seal configuration with dolphin lip produces a Kelvin-Helmholtz instability at the interface of the purge and the mainstream flows at a low purge flow rate to induce new leakage vortex branches in the passage of the blade.     

Effect of protrusion amount on gas ingestion of radial rim seal

In this paper, the effect of different amount of protrusion on various parameters in rotor–stator system was experimentally studied by measuring CO₂ concentration and pressure, in order to obtain the optimal protrusion amount. The parameters of different dimensionless sealing flow were measured under the condition that the annulus Reynolds number was 4.39 × 10⁵ and the rotating Reynolds number was 1.05 × 10⁶. The results show that the change of the amount of protrusions has little effect on the static pressure in the cavity, and the static pressure change near the sealing ring is almost negligible. But the total pressure and sealing efficiency increase first and then decrease with the increase of the amount of protrusion. The variation of power consumption is the same. A complex vortex structure will appear at the high radius region when the protrusion is installed. On the other hand, the protrusion can effectively reduce the minimum sealing flow of the rotor–stator cavity. Furthermore, considering the sealing efficiency and power consumption, the best range of the protrusion amount is about 36. The ratio near this range can optimally balance the alleviation of the gas ingestion and the reduction of the power consumption.     

复合材料胶粘修复界面的载荷传递仿真优化

胶接修复工艺是飞机结构修理的重要工艺之一,为了研究胶黏工艺对修复效果的影响规律,探索最佳的工艺参数,本文建立胶粘修复的三维模型,利用ANSYS Workbench有限元软件对胶粘修复界面载荷传递进行分析,讨论补片材料、补片厚度、胶层剪切模量和胶层厚度对胶接修复的影响。仿真结果证明补片材料为硼/环氧树脂时,胶粘失效风险最小;补片较厚时,胶接修复效果好,但补片过厚会削弱胶接修复的效果;胶黏剂剪切模量越大越有助于损伤区域的修复,工程应用中建议选用剪切模量较高的胶黏剂;胶层较厚时会增大胶层发生缺陷的概率从而减弱修复效果,建议合理选取厚度较小的胶层。最后提出修复界面的表面处理、复合材料端部的溢胶以及倒角处理均有益于修复结构的载荷传递,缓和胶粘界面应力水平,降低胶层失效的风险。     

复合材料与金属胶接结构的次弯曲效应研究

复合材料与金属胶接单搭接的次弯曲效应引起的剥离应力,会大大降低接头的强度。采用有限元方法分析复合材料铺向角、铺层顺序及斜削对次弯曲的影响,并进一步研究分析次弯曲和胶层剥离应力、板的弯曲刚度之间的关系。结果表明：次弯曲影响剥离应力的大小;弯曲刚度越大,次弯曲越小;斜削有助于减小次弯曲。     

高性能橡胶密封材料及其在航天工业上的应用

系统介绍了航天材料及工艺研究所55年来研制的高性能橡胶密封材料的主要种类、牌号及其物理机械性能,并通过若干典型应用实例说明其在我国航天工业上的应用现状.