可重复使用热防护材料应用与研究进展

可重复使用热防护系统是为高速重复使用飞行器而发展的关键性技术,涵盖了地球大气环境及非地球大气环境下的弹道式再入、高马赫数巡航等应用场景。根据现有高马赫数飞行器热防护现状,对高马赫数飞行器的主要热防护系统类型、特点和使用场景进行了简要介绍。在此基础上,结合国外里程碑式可重复使用飞行器（X-15、SR-71、航天飞机、X-33、X-37B、Spaceliner等）,梳理了可重复使用热防护材料的应用与研究进展,论述了代表性可重复使用热防护材料的发展、性能、研制进度、特点及应用前景。对国外在可重复使用热防护材料研制中的设计及发展思路,以及所存在的主要问题进行了总结归纳,为可重复使用热防护材料未来的发展提供了思路。     

直接的矩阵分裂计算跨音速喷管流场

给出了分离系数矩阵求解欧拉方程组时系数矩阵的直接分离公式，减少和简化了应用该方法时的矩阵运算，参照Ｂｅａｍ－Ｗａｒｍｉｎｇ显式格式构造与ＳＣＭ方法一致的内点差分格式，并分析了它的数值特性，对有斜激波的跨音速内流场进行了数值仿真。计算中采用变系数的当地时间步长，加快了流场达到的收敛速度，计算无需引入任何人工参数，计算值与实验结果吻合。     

分析机匣—支承—转子系统动态响应的子结构迭代法

为分析机匣—支承—转子系统的动力特性，发展了一种子结构迭代—传递矩阵方法。利用这一种方法使得对复杂转子系统的分析大为简化。与传统的整体传递矩阵方法相比，可大为节省机时，简化公式推导。理论证明与计算实例都表明，该方法具有收敛快、稳定性好的特点。     

空间坐标转换技术的分析与研究(一)

系统分析了空间坐标转换的不同形式及其相互关系,运用旋转矩阵理论作了较为深入的探讨,指出了使用中应注意的问题。提出了齐次矩阵,微分算子及雅可比阵矩等有用概念,作为例子,讨论了这些概念在机器人学中的应用。     

原位合成TiC/Ti基复合材料氧化行为

研究了TiC/Ti基复合材料在550℃,600℃和650℃空气中恒温氧化行为.分析了增强体TiC对钛基复合材料氧化动力学行为的影响,并用X射线衍射仪(XRD)和配有能谱仪(EDS)的扫描电子显微镜(SEM)对氧化层表面的相组成、形貌以及氧化层剖面的显微结构进行了分析.结果表明:TiC/Ti基复合材料的氧化层由金红石型的氧化物TiO2组成;增强体TiC能够提高钛基复合材料的抗氧化性,而且随着TiC增强体含量的增加,钛基复合材料的抗氧化性增加;这主要是因为TiC增强体能够促进致密氧化膜的生成.氧化动力学曲线为抛物线类型.     

自校准定轨方法的精度评定

推导了自校准定轨的误差协方差公式。与非校准方法相比,指出了自校准定轨能够同时修正系统误差和改善定轨精度,并提出了敏感度矩阵在选取校准参数中的作用及其值得注意的方面。     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

PI controller relay auto-tuning using delay and phase margin in PMSM drives

This paper presents an auto-tuning method for a proportion plus integral（PI） controller for permanent magnet synchronous motor（PMSM） drives, which is supposed to be embedded in electro-mechanical actuator（EMA） control module in aircraft. The method, based on a relay feedback with variable delay time, explores different critical points of the system frequency response.The Nyquist points of the plant can then be derived from the delay time and filter time constant.The coefficients of the PI controller can then be obtained by calculation while shifting the Nyquist point to a specific position to obtain the required phase margin. The major advantage of the autotuning method is that it can provide a series of tuning results for different system bandwidths and damping ratios, corresponding to the specification for delay time and phase margin. Simulation and experimental results for the PMSM controller verify the performance of both the current loop and the speed loop auto-tuning.     

定量危害性矩阵分析方法研究

危害性矩阵分析中,由于同一个严酷度类别在矩阵图中是一个区间,容易出现当几个故障模式的严酷度相同时,在矩阵图中无法精确标识,从而使得得出的危害度有偏差.同时,利用作图法,分析效率较低.本文首先对目前的危害性分析方法进行改进,将区间进行再次划分并用显性直观的数值进行度量;然后,以某型飞机升降舵操纵分系统为例,进行危害性分析.结果表明:该方法可以对各故障模式或产品的危害度给出精确的量化值,为改进决策提供支持.