Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

自由飞试验模型惯性矩的测定

作者根据多年来自由飞试验的实践,叙述了自由飞模型惯性矩的调试、计算、误差分析与处理的经验与方法。     

J—7LP飞机1：6遥控模型失速尾旋试验

对无动力J—7LP动力学缩比模型进行了遥控试飞,以研究其失速尾旋特性,全偏平尾和方向舵可使模型进八尾旋,舵面全回中即可从各种尾旋中改出。偏转副翼对尾旋特性有明显的影响。     

飞机主操纵系统疲劳试验载荷谱小操纵位移频次问题研究

针对飞机全机主操纵系统疲劳试验载荷谱中小操纵位移频次影响问题进行了分析和讨论,确定了某机全机主操纵系统小操纵位移频次的级别。同时,在原某机全机主操纵系统疲劳试验载荷谱的基础上再次对其小操纵位移频次进行了计算,去掉了这一级别以下对全机主操纵系统疲劳试验无影响的小操纵位移频次,从而完善了主操纵系统疲劳试验载荷谱。另外,对小操纵位移频次问题研究结果在其全机主操纵系统疲劳试验中的实施效果进行了阐述。     

对“ZY-1”FM1整星热平衡、热真空试验中有效载荷被污染情况的分析

介绍了卫星在热平衡试验后所发现的有效载荷的污染情况,通过对污染提取物的分析和试验设备的再次污染监测,找出了污染源,并对以后的防污染工作提供了借鉴.     

低空突防任务下综合飞行/推进系统的建模与仿真

建立了综合飞行／推进系统的数学模型，介绍了飞机全维非线性数学模型和涡轮风扇发动机非线性部件级数学模型的建模及综合方法。对飞机执行地形中随任务时，飞行员调节飞行速度的方法与基于总能量的调节飞行速度的方法进行了比较。结果表明，基于总能量的方法比飞行员直接控制飞行速度能够减小发动机的燃油消耗，降低发动机的磨损，进而可以增加飞机的航程，延长发动机的使用寿命。     

掠海飞行导弹击水概率的仿真研究

本文对掠海导弹的击水概率问题进行了研究,提出了用均匀设计、Monte—Carlo法和逐步回归法建立击水概率预报公式的仿真方法,并结合某型号的反舰导弹进行计算,得到了满意的结果。本文还利用表观频率和表观频谱的概念,建立起飞航导弹的背景干扰——海浪和阵风的数学模型,并用波叠加法进行了数字仿真。     

无人机自由编队飞行的补偿模糊神经网络控制

为了克服当前提出的无人机编队飞行的不足，提出一种新的无人机编队飞行概念——自由编队飞行，制定了相关的避让规则，用补偿模糊神经网络进行训练，实现自由编队飞行的补偿模糊神经网络控制。仿真显示，编队飞行的飞机能按照规则自主改变航路进行避让，表明了该方法的有效性。     

四维下降飞行技术的研究与仿真：定常航迹角法下降剖面解算

本文研究的是四维飞行性能管理系统的核心环节－飞机在终端区域内的四维下降技术，首先探讨了基于常值航迹角的定常Ｍ数／指示空速下降飞行技术，论述了其高度剖面的构成与特点，通过尤拉积分方法求解飞机运动方程，实现了高度冲面的解算。其次开发了对速度剖面的迭代过程，选取原则及方法。本文在进行理论分析的同时，还开发了满意的仿真软件，一了其应用价值。     

载人航天可靠性与空间环境试验

文章通过对国外载人航天事故统计,分析各种空间环境条件对航天器及航天员的影响,阐述了空间环境试验对提高载人航天可靠性的重要意义,提出为了提高载人航天的可靠性,应进行充分和严格的空间环境模拟试验。