Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

介质粘性对椭圆齿轮流量计性能影响的研究

本文根据粘性流体力学原理和转子动力学理论,分析了椭圆齿轮流量计的缝隙漏流和转子受力状况,建立了能预测介质粘性对流量计误差特性和压力损失影响的理论模型。数值计算表明,理论值与实验数据基本吻合。     

末制导中的全向攻击原理

本文提出一种能够实现导弹对活动目标全方位攻击的基本原理,并讨论了工程上实现的途径。通过平面及空间导引弹道仿真,初步证明了它的正确性及可实现性。     

一种分析轮式起落架直升机“舰面共振”的方法

 针对轮式起落架直升机，提供了一种“舰面共振”动力稳定性分析方法。首先，针对直升机在舰面上随舰船一起摇晃时左右起落架受载不对称的状况，近似采用受对称载荷产生对称变形、受非对称载荷产生非对称变形的方法计算了直升机的平衡状态；其次，根据轮式起落架轮胎和缓冲支柱刚度和阻尼共同作用的特点，结合轮式起落架的几何关系，采用复刚度的方法得出起落架作用于机体的刚度与阻尼；最后，用桨叶振动模态法对轮式起落架的直升机进行了不同旋翼升力卸载以及鱼叉系留与否的“舰面共振”动力稳定性计算分析，并通过算例得到验证。     

三维机身起落架着陆冲击力学模型

 本文根据起落架系统的几何、运动学及动力学特性,推导出目前广泛使用的三维机身式起落架,并具有柔性支柱系统的着陆冲击力学模型。并对其初始条件、对称着陆及不对称着陆情况作了动力学分析。     

自吸气脉冲爆震发动机超声速进气道气动性能的数值研究

采用有限体积法计算了某轴对称超声速进气道,在不同幅度和频率的出口扰动压强下的进气道内结尾正激波的运动情况,得出了进气道内结尾正激波运动特性和扰动压强的频率和幅度的关系。在计算中,本文采用了多块结构化网格,控制体积的界面无粘通量采用三阶迎风格式插值获得,同时采用了minmod通量限制器,以确保在激波处的解的物理特性;扩散通量采用二阶中心差分格式插值获得。定常计算采用当地时间步法,非定常计算采用双时间步法。离散的代数方程采用交替方向迭代法求解。     

不均布行星齿轮传动装置设计的几个问题

推导了不均布行星传动的装配条件；提出了不均布所带来的各行星轮合力及工作过程中的动不平衡离心力的计算公式；推荐了使其合力为零或减至最小的方法；得出了行星轮不均布的行星传动装置的使用条件和设计时应注意的几个问题。     

起落架与防滑刹车系统的相互作用研究

通过采用一个简化的起落架数学模型,对某机在着陆滑跑过程中防滑刹车系统的工作状态进行计算机仿真;并通过改变起落架的结构参数,对起落架与刹车系统在飞机着陆刹车过程中的相互作用进行了初步的定量分析,最后提出了考虑起落架因素的刹车系统半物理仿真试验验证方法。