在中面载荷作用下正交各向异性矩形板后屈曲行为分析

本文利用摄动法和广义傅氏级数法分析了在中面载荷作用下正交各向异性矩形板后屈曲行为,对几种典型的纤维增强环氧复合材料矩形板后屈曲行为给出了结果,可供工程设计应用参考。     

非线性系统的高阶线性化方法及其在二阶摄动制导中的应用

本文讨论了非线性系统相对于标称轨道的高阶线性化方法。文中在一阶线性展开的基础上,提出了高阶误差项的补偿方法,导出了计算二阶补偿项系数的线性方程组,并给出了补偿项的计算公式。然后,采用所得方法研究了飞行器的二阶摄动制导方法。     

混合移频静刚度法和直接扰动迭代法

本文对混合移频动柔度法的失代式进行等价变换，从而得到一个“变种”，该变种不包含混合移频系统的动柔度式F^△（λ*），这便消除了F^△（λ*）带来的近似性，另外，对直接扰动法也进行等价变换，引出可以省时地用于许多特征向量导数计算的直接扰动迭代法。最后，为了供读者参数，本文还导出了三种混合移频动柔度法的非迭代式，其中有两种恰好是另外两种动柔度法经混合移频后的非迭代式，这实际上已将另两种动柔度法也扩展到密集根情况了。     

一种联合估计的有源校正高精度测向算法

针对存在系统误差的阵列模型,提出了一种有源标校下的联合估计测向算法。该算法把误差矩阵估计转化为误差系数估计,并采用到达角精确已知的源信号进行标校,在此基础上使用最小二乘法联合估计幅相不一致误差系数和互耦误差系数,最后使用结合误差矩阵的MUSIC算法测量信号的到达角。仿真表明,该算法仅需要3个标校源,其精度相比于无阵列误差情况下降0.05°,具有较好的工程可实现性。     

民用运输机吊挂设计强度要求研究

论述了民用运输机吊挂设计强度要求,并重点阐述了以下几个方面:吊挂初步设计载荷、FBO载荷计算要求、发动机非包容性转子损坏下的适航符合性思路及离散源损伤容限剩余强度评估要求。在这几部分的阐述中,有具体的设计数据及案例,对设计工作有很好的指导作用。     

Parachute dynamics and perturbation analysis of precision airdrop system

To analyze the parachute dynamics and stability characteristics of precision airdrop system,the fluid–structure interaction(FSI) dynamics coupling with the flight trajectory of a parachute–payload system is comprehensively predicted by numerical methods.The inflation behavior of a disk-gap-band parachute is specifically investigated using the arbitrary Lagrangian–Euler(ALE) penalty coupling method.With the available aerodynamic data obtained from the FSI simulation,a nine-degree-of-freedom(9DOF) dynamic model of a parachute–payload system is built and solved to simulate the descent trajectory of the multi-body dynamic system.Finally,a linear five-degree-of-freedom(5DOF) dynamic model is developed,the perturbation characteristics and the motion laws of the parachute and payload under a wind gust are analyzed by the linearization method and verified by a comparison with flight test data.The results of airdrop test demonstrate that our method can be further applied to the guidance and control of precision airdrop systems.     

长航时高精度惯导系统姿态阵的四种解算方法

高精度惯性导航系统是保证水下或水面运载体长时间安全航行及搭载的仪器设备正常工作的关键技术之一,姿态阵解算是其核心问题。通过分解姿态阵以及分别采用Euler角和四元数描述姿态参数,建立解算姿态阵的四种方法;分别对这四种方法中的姿态模型进行扰动,并研究相应线性化误差模型的精度及其影响因素;利用数值仿真法对四种姿态解算方法的结果及对应的线性化误差模型的精度进行了比较分析,结果表明:姿态阵解算分解法显著差别于整体法,采用Euler角或四元数描述姿态参数对姿态阵解算精度的影响不显著,分解法对应的线性化误差模型的精度优于整体法。     

一类由星下点反算卫星近圆回归轨道的方法

提出了一类近圆回归轨道的设计方法,解决当飞行任务对星下点有要求时,近圆回归轨道的设计问题。分析了星下点轨迹与轨道参数的关系,概括为当对星下点轨迹有要求时,近圆回归轨道的设计依赖于轨道半径和轨道倾角两个参数的确定。以轨道半径和轨道倾角为未知量依据星下点轨迹要求条件构建了非线性方程组,但直接求解过于复杂,采取迭代的方法解决。编制了MATLAB程序进行设计计算,并将计算结果用软件STK(Satellite Tool Kit)进行仿真。仿真结果显示,该算法能够较好的实现设计目标。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

GPS卫星轨道摄动分析

对影响ＧＰＳ卫星轨道的主要摄动量，即地球势函数Ｊ２项对ＧＰＳ卫星轨道的影响作出了定量分析，为我国建立自己的局部测控网获取精密星历提供依据。