模拟打伤/抛修缺口对TC17钛合金叶片振动疲劳性能的影响

研究了无缺口、打伤缺口和3种抛修缺口对TC17钛合金叶片振动疲劳性能的影响.结果表明,无缺口模拟叶片的疲劳寿命最长且寿命分散性最小,打伤缺口模拟叶片的疲劳寿命最短且寿命分散性最大,3种抛修缺口模拟叶片的疲劳寿命介于前两者之间,其中抛修缺口Ⅰ模拟叶片的疲劳寿命最长.无缺口和抛修缺口模拟叶片的疲劳裂纹均起源于叶片根部,打伤...     

基于BIT的气象雷达系统深度测试平台研究

针对气象雷达系统专用测试设备利用率低、系统操作复杂等问题,在深入分析系统接口技术以及测试总线技术的基础上,提出了基于通用测试设备的深度测试平台设计方案并进行了验证,这为实现通用化航电测试平台、提高资源共享效率提供了新思路.     

汽车用齿轮激光淬火工艺研究

对汽车齿轮材料 40CrNiMo的表面激光淬火工艺进行了研究 ,分析了工艺参数对硬化深度及耐磨性的影响。通过试验 ,证明 40CrNiMo激光淬火工艺可行     

未知空间目标纹理缺失表面三维重建算法

针对传统三维重建方法难以对纹理缺失表面进行完整重建的问题,提出一种基于深度学习与截断符号距离函数(TSDF)融合的未知目标三维表面完整重建算法。首先设计一种基于深度学习的图像逐像素深度估计框架,通过在训练过程中引入多个复杂结构模型,提高该深度估计框架的泛化能力;其次,利用TSDF对各帧图像所估计的深度信息进行融合,实现对纹理缺失区域的空间目标完整三维重建。根据仿真校验,对于300 mm尺寸的卫星模型图像,像素深度估计平均误差约为13 mm,通过TSDF融合后尺寸精度误差小于5.10%。实验结果表明该算法可以对未知空间目标光学图像进行逐像素深度估计,并获得目标完整的三维结构与纹理信息,有效解决无纹理区域的重建结构缺失问题。     

Understanding the mineralogy of a compositional anomaly north of the Korolev basin using Moon mineralogy mapper

The work attempts to understand the mineralogy of the reported geochemical anomaly located in the north – northeast region of the Korolev basin using Moon Mineralogy Mapper (M³) onboard Chandrayaan ?1 and other lunar datasets. To understand the mineralogy, colour composite images using integrated band depth parameters and mineral indices were prepared, and the M³ spectral signatures corresponding to the unique colours of these colours composites were investigated. Further, Modified Gaussian Model (MGM) deconvolution was applied to these spectra. The results of spectra studies reveal that the area is made up of heterogeneous lithologies, predominantly composed of anorthosite along with minor occurrences of pyroxene-bearing (both low-calcium and high-calcium variety) and spinel-bearing lithologies. Correlation of spectral studies with the morphology revealed that pyroxene was typically associated with fresh craters and their ejecta. Spinel was found to be ubiquitous and is well-dispersed, possibly distributed along with the ejecta blanket of large impact craters. This association hints that the pyroxene-hosted layer most likely occurs beneath the spinel-bearing layer. Such observed assemblages may have resulted from physical mixing during the impact cratering events. This mixed lithology could arise due to the mafic mineral-bearing ejecta of the South-Pole Aitken (SPA) basin and spinel-bearing Orientale ejecta. Korolev most likely impacted on a thick layer of SPA ejecta, and impact basins such as Hertzsprung and Orientale have occurred post-Korolev formation. Orientale being the youngest of the large impact basins, its ejecta carrying the light plain material would have overprinted the older SPA ejecta. Smaller impact craters would have churned the ejecta so that presently we observe a composite lithology with a variable abundance of pyroxene and spinel.     

基于轨道参数和SAR回波数据的多普勒调频率快速估计

多普勒调频率是SAR方位向压缩的关键参数之一. 调频率的失配会带来严重的方位向散焦, 从而影响成像质量. 基于减灾、防灾目的, 需要对SAR数据快速成像, 从而相应要求对多普勒调频率进行快速估计处理. 根据多普勒调频率快速估计需求, 提出了一种基于轨道参数法和Map Drift算法估计多普勒调频率的综合反演算法, 利用多普勒调频率与距离的关系, 简化整个估计流程, 从而提高估计速度. 同时给出了一种块数据筛选的方法, 用于选择综合反演法中所采用的块数据. 实验结果表明, 综合反演法能够在满足成像质量要求的基础上, 快速估计出多普勒调频率.     

磁悬浮控制力矩陀螺高速转子高频自激振动的抑制

磁悬浮控制力矩陀螺（CMG）中转子一阶弹性模态自激振动是影响磁悬浮高速转子系统稳定性的关键因素之一.自激振动通常可以采用陷波器（NF）进行抑制,然而引入NF或改变其参数以及转子转速的变化均会改变模态自激频率,因而难以直接准确地确定NF参数.本文提出一种仿真确定NF参数的方法,通过转子弹性模态缩减建模和模态参数确定得到准确的弹性转子动力学模型,进而采用闭环仿真优化确定NF中心频率和极点阻尼.采用该方法设计的NF有效抑制了转子的高频弹性模态自激振动,使得磁悬浮CMG转子可以稳定升速到24000r/min.实验结果验证了该方法的实用性和有效性.     

基于信息管理与融合技术在目标类型识别上的研究

在系统模型的基础上结合实战提出影响目标飞机类型识别的证据,并按照影响程度进行优先权排序;结合数据库,提出证据概率计算的数学表达式;采用深度优先搜索的融合模式,按照D-S证据理论进行融合计算;在传感器管理模块的作用下,对融合结果进行反馈控制;结合实例,对系统进行仿真验证,证明其可靠有效。     

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System (BMCS) are studied from climatic data, “Marathon Exp. Leg.8, 1984” data, and Sea surface temperature (SST) data base “ds277-Reynolds” (1981–2000). The South Atlantic Central Water (SACW) is divided in two main types: tropical (TW) and subtropical water (ST). Water masses, Fronts, Inter-Frontal and Frontal Zones are analysed and classified: (a) the water masses: Tropical Low-Salinity Water, Tropical Surface Water, Tropical Tropospheric Water, Subtropical Low-Salinity Water, Subtropical Surface Water, Subtropical Tropospheric Water. T,S characteristics of intermediate, deep and bottom water defined by different authors are confirmed and completed; (b) the Inter-Frontal Zones: Tropical/Brazil Current Zone, Subtropical Zone and Subantarctic Zone; (c) the Frontal Zones: Subtropical, Subantarctic and Polar, and (d) the Fronts: Subtropical Front of the Brazil Current, Principal Subtropical Front, North Subtropical Front, Subtropical Surface Front, South Subtropical Front, Subantarctic Surface Front, Subantarctic Front and Polar Front. Several stable T–S relationships are found below the friction layer and at the Fronts. The maximum gradient of the oceanographic characteristics occurs at the Brazil Current Front, which can be any of the subtropical Fronts, depending on season. Minimum mean depth of the pycnocline coincides with the Fronts of the BMCS, indicating the paths of low-salinity shelf waters into the open ocean. In the work it is shown how to recover the horizontal and vertical thermohaline structure of waters from satellite data RSMAS SST.     

热处理后滚压螺纹对30CrMnSiA,30CrMnSiNi2A钢螺栓缺口敏感性的影响

介绍了高强度、超高强度合金钢螺栓分别采用不同的螺纹加工工艺时,进行偏斜拉伸对比试验研究的过程与结果;分析了热处理后滚压螺纹对其缺口敏感性无明显影响的因素,进一步论证了热处理后滚压螺纹工艺的可行性;并对采用热处理后滚压螺纹工艺的这两种钢螺栓进行了缺口敏感性的定量分析.