Far-UVC light as a new tool to reduce microbial burden during spacecraft assembly

This work aims to investigate far-UVC light at 222 nm as a new microbial reduction tool for planetary protection purposes which could potentially be integrated into the spacecraft assembly process. The major advantage of far-UVC (222 nm) compared to traditional germicidal UVC (254 nm) is the potential for application throughout the spacecraft assembly process in the presence of humans without adverse health effects due to the limited penetration of far-UVC light into biological materials. Testing the efficacy of 222-nm light at inactivating hardy bacterial cells and spores isolated from spacecraft and associated surfaces is a necessary step to evaluate this technology. We assessed survival of Bacillus pumilus SAFR-032 and Acinetobacter radioresistens 50v1 exposed to 222-nm light on proxy spacecraft surfaces simulated by drying the bacteria on aluminum coupons. The survival fraction of both bacteria followed a single stage decay function up to 60 mJ/cm², revealing similar susceptibility of both species to 222-nm light, which was independent of the exposure rate. Irradiation with far-UVC light at 222 nm is an effective method to decontaminate the proxy spacecraft materials tested in this study.     

POGO蓄压器变频降幅特性分析

论述纵向耦合振动（POGO）蓄压器的变频降幅特性，指出其主要影响因素是蓄压器容积及连接管路的液阻，根据输送管路的特定频率，选择适当的蓄压器容积，使其固有频率与特定管路的压力脉动频率相一致，可以获得预期的变频降幅效果。给出了蓄压器的变频降幅试验研究结果，可为POGO蓄压器的设计，研制，使得提供参考。     

随机脉位序列调制的脉冲多卜勒引信原理

提出一种新型的噪声脉中多卜勒引信，即随机脉位序列调制的脉冲多卜勒引信，给出了其原理实现框图和随机脉位序更调制码的产生方案，分析了其工作原理和数学模型，研究了它的抗干扰特性。分析表明，它具有良好的抗干扰特性，同时不会出现距离速度模糊，是一种较佳的脉冲多卜勒引信。     

模型的随机平衡降阶

本文提出了系统在白噪声激励下的一种开环降阶方法—随机平衡降阶法。在系统的随机平衡坐标中，输出性能指标可以表示成一组与系统随机可控／可观格莱姆相关的贡献值的和。根据这组贡献值的大小，可以决定在随机平衡坐标下降阶模型所要保留的状态分量，并从输出误差指标的最优角度出发，对输出矩阵作个修正。最后给出了一个数值仿真例子。     

微波噪声校准系统介绍

新的．极低噪声放大器的研制开发和广泛使用，微波系统的结构日趋复杂，微波工程测量能力下断提高，但热噪声仍然是今天微波系统性能的主要限制。例如，远距离卫星通信工程对卫星转发器的接收机和地球站接机的噪声特性提出很高的要求。因此，准确地测量系统的噪声以及时噪声发生器进行准确校准的需求非常迫切。本文叙述自己研制的噪声源校准系统的基本原理，分析超噪比校准不确定度，提供具体的校准实例，提出进一步提高校准准确度的途径。     

THE RESEARCH OF INCREASING LIFT ANDREDUCING DRAG FOR WING-TIP SAILS

ＴＨＥＲＥＳＥＡＲＣＨＯＦＩＮＣＲＥＡＳＩＮＧＬＩＦＴＡＮＤＲＥＤＵＣＩＮＧＤＲＡＧＦＯＲＷＩＮＧ－ＴＩＰＳＡＩＬＳＣｈｅｎＭｉｎｇｙａｎ，ＱｉＭｅｎｇｂｕ（ＮａｎｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，...     

减压阀噪声和振动的控制

文中给出控制减压阀噪声和振动的新方法。文中指出:如果稳定系数S_r<1,阀有可能出现噪声和振动;如果稳定系数S_r>1,阀就无噪声和振动。计算和实验比较证明,该方法是可行的。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

基于改进准则法的复合壳阻尼结构拓扑减振动力学优化

针对复合壳阻尼结构的拓扑减振优化问题，以约束阻尼层的有限单元为设计变量，采用体积比、模态频率和振型为优化约束条件，构建以多模态权重系数的结构模态损耗因子数值关系为优化目标函数的拓扑减振优化模型。为了拓展优化目标灵敏度具有不局限于某一变密度法插值模型的形式，推导了数值表达式的一般函数式。动力学优化中优化目标灵敏度正、负数集共存，使得非凸性的目标函数设计变量出现负值或优化函数寻优于局部极值点。为此，推导出复合壳阻尼结构的全域灵敏度改进优化准则法迭代格，以确保每次迭代域均为全域设计变量集。结合有限单元法编程实现了复合壳阻尼结构改进准则法，并对复合壳结构进行拓扑减振优化分析。结果表明：在敷设体积减为全覆盖的50%时，复合壳结构的模态损耗因子增减偏差为10%，具有提升减振的轻量化设计目的；各阶目标函数和拓扑构型所需的迭代次数少，中间密度区域较小，多阶优于单阶模态优化函数，易于获得全域寻优的有效减振。     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.