Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

Topology optimization in lightweight design of a 3D-printed flapping-wing micro aerial vehicle

Topology optimization is an effective method to obtain a lightweight structure that meets the requirements of structural strength. Whether the optimization results meet the actual needs mainly depends on the accuracy of the material properties and the boundary conditions, especially for a tiny Flapping-wing Micro Aerial Vehicle (FMAV) transmission system manufactured by 3D printing. In this paper, experimental and numerical computation efforts were undertaken to gain a reliable topology optimization method for the bottom of the transmission system. First, the constitutive behavior of the ultraviolet (UV) curable resin used in fabrication was evaluated. Second, a numerical computation model describing further verified via experiments. Topology optimization modeling considering nonlinear factors, e.g. contact, friction and collision, was presented, and the optimization results were verified by both dynamic simulation and experiments. Finally, detailed discussions on different load cases and constraints were presented to clarify their effect on the optimization. Our methods and results presented in this paper may shed light on the lightweight design of a FMAV.     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

机动再入飞行器自适应飞行控制系统设计

研究机动再入飞行器的制导控制问题。为了解决机动再入飞行器气动系数变化范围大、气动耦合严重和气动参数非线性过零常值大等恶劣条件下的控制，并且能充分利用飞行器可测量信息提高系统自适应能力，本文提出了状态方程参数辨识－－极点配置－－前馈补偿自适应控制的飞行控制系统的设计方法。通过对新型号再入飞行器的制导系统仿真，可以看出该控制系统使其有很好的飞行性能。     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

机动再入飞行器的复合制导方案研究

对机动再入飞行器弧段的复合制导方案进行了研究，首先提出了通过高低空复合制导控制再入飞行器的终端速度和弹道倾角的思路；然后分别给出了高空最优制导律和大气厚再入最优制导律；最后对此复合制导方案进行了数字仿真。仿真结果表明此方案在理论上是可行的。     

再入制导和弹道跟踪误差分析

新一代可重复使用运载器对再入制导提出了更高地要求。目前的空间运输系统证明基于阻力加速度的制导方法是行之有效的。其基本概念是跟踪基准阻力加速度包线，在飞行过程中可根据需要更新这个包线。跟踪适当的阻力加速度包线保证了飞行器可以飞行准确的距离达到目标，同时满足弹道约束。在横向上，我们可采用类似于美国航天飞机的倾斜反转逻辑或航向角跟踪技术。本文推导出了基于反馈线性化的控制算法，并将其应用于可重复使用运载器纵向和横向的制导。最后，我们分析了阻力加速度跟踪的误差。     

Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

航空绞车综合测量系统的设计与实现

简要介绍了航空绞车综合测量系统的功能、组成、工作原理及软硬件设计。     

高空高速无人飞行器热控制系统设计

针对飞行时间短、速度和高度变化快、表面温度波动大的无人飞行器UAV(Unmanned Aerial Vehicles)热控制系统设计难题,提出了一种可解决实际工程问题的热分析计算方法.即把热天工况、冷天工况和标准天工况作为设计/试验工况;采用参考温度法、高超音速工程预测法或计算流体动力学CFD(Computational Fluid Dynamics)数值模拟法,确定了飞行器表面温度分布,并把其作为后续热分析数学模型的外边界条件;分析结构热容量对瞬态热载荷的影响,建立与之相应的边值问题方程,并采用有限差分法求解;根据高空高速飞行特点及瞬态热载荷值,确定仪器设备舱调温系统方案.