Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

多元线性回归在坐标测量中的应用

简要介绍了多元线性回归的数学原理,重点分析了坐标测量中利用回归分析进行基本几何要素处理计算的原理、方法和预处理技巧,在此基础上介绍和讨论了形位误差的处理计算方法。     

基于SVR的导航传感器自适应野值检测方法

针对Lagrange插值法无法处理连续野值的问题，提出了一种基于改进支持向量回归(Support Vector Regression, SVR)的导航传感器自适应野值检测方法。该方法结合了支持向量回归利用小样本数据就能够准确建模和3σ准则计算简易的优点，利用支持向量回归在线建立舰船的运动模型对测量值进行实时预测，并利用3σ准则自适应地计算阈值，然后通过比较阈值与预测残差来判别测量值是否为野值点。该方法可以自动地学习舰船的运动趋势，建立舰船的真实运动模型，而且不受连续野值点的影响，能够在没有其他传感器辅助的条件下完成野值检测。海试实测数据表明，提出的方法对离散和连续的野值点均具有较好的检测效果，同时可以更好地估计传感器的真实测量值。     

民用客机舒适性评估

本文给出了能用于说明民用客机旅客乘坐品质的数量关系,这些关系能用于预测旅客乘坐的舒适性。可供设计及使用单位参考。     

K8飞机前起落架载荷谱空测数据处理分析

目前国内在处理起落架两数据中，大多采用应变值单向敏感的矩阵法处理，存在一定的局限性。 K8前起落架两数据处理中，在分析了力学与数理方法的基础上，采用数理统计中线性回归的方法进行处理，其数学模型为多元线性回归方程。采用的计算方法为逐步回归计算法。从计算结果分析，各方向载荷与理论情况比较接近，变化规律与真实情况相符合。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

基于最小一乘的跑道入口高度计算

跑道入口高度是关系着飞机能否安全着陆的关键参数,在其计算中需要采用曲线拟合预测的方法。目前大多是采用基于最小二乘准则的拟合方式。由于最小二乘准则的局限性,当下滑道随机误差不满足正态分布,在飞行数据中出现异常点时会给预测带来较大误差。将最小一乘方法引入到跑道入口高度计算问题中,提高了算法的稳健性,很好地克服了这一问题。     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.