Mapping mean lake surface from satellite altimetry and GPS kinematic surveys

Lake water height is a key variable in water cycle and climate change studies, which is achievable using satellite altimetry constellation. A method based on data processing of altimetry from several satellites has been developed to interpolate mean lake surface (MLS) over a set of 22 big lakes distributed on the Earth. It has been applied on nadir radar altimeters in Low Resolution Mode (LRM: Jason-3, Saral/AltiKa, CryoSat-2) in Synthetic Aperture Radar (SAR) mode (Sentinel-3A), and in SAR interferometric (SARin) mode (CryoSat-2), and on laser altimetry (ICESat). Validation of the method has been performed using a set of kinematic GPS height profiles from 18 field campaigns over the lake Issykkul, by comparison of altimetry’s height at crossover points for the other lakes and using the laser altimetry on ICESat-2 mission. The precision reached ranges from 3 to 7 cm RMS (Root Mean Square) depending on the lakes. Currently, lake water level inferred from satellite altimetry is provided with respect to an ellipsoid. Ellipsoidal heights are converted into orthométric heights using geoid models interpolated along the satellite tracks. These global geoid models were inferred from geodetic satellite missions coupled with absolute and regional anomaly gravity data sets spread over the Earth. However, the spatial resolution of the current geoid models does not allow capturing short wavelength undulations that may reach decimeters in mountaineering regions or for rift lakes (Baikal, Issykkul, Malawi, Tanganika). We interpolate in this work the geoid height anomalies with three recent geoid models, the EGM2008, XGM2016 and EIGEN-6C4d, and compare them with the Mean Surface of 22 lakes calculated using satellite altimetry. Assuming that MLS mimics the local undulations of the geoid, our study shows that over a large set of lakes (in East Africa, Andean mountain and Central Asia), short wavelength undulations of the geoid in poorly sampled areas can be derived using satellite altimetry. The models used in this study present very similar geographical patterns when compared to MLS. The precision of the models largely depends on the location of the lakes and is about 18 cm, in average over the Earth. MLS can serve as a validation dataset for any future geoid model. It will also be useful for validation of the future mission SWOT (Surface Water and Ocean Topography) which will measure and map water heights over the lakes with a high horizontal resolution of 250 by 250 m.     

利用秩统计方法确定不完全S-N数据的p-S-N曲线

本文依据结构不同可靠度下的S—N曲线形状参数相同的观点，利用复合材料结构的不完全S—N数据，得到一组不完全疲劳极限数据，并采用秩统计方法，求得结构的p—S—N曲线，最后，给出了两个应用实例，通过对比分析了本文方法与假定完全寿命法的处理结果，发现本文方法充分利用了数据信息，能给出更好的疲劳性能。     

扇形段与全环燃烧室熄火性能换算研究

为研究不同类型燃烧室试验件熄火性能之间的关系,开展了扇形段和全环燃烧室的熄火性能试验.通过试验对比了二者熄火规律的相似性和差异性,并分析了造成差异的主要因素.以Lefebvre熄火模型为基础,结合雾化数据,拟合得到扇形段与全环燃烧室的贫油熄火经验关系式,并推算出二者熄火性能的定量换算公式.结果表明:扇形段与全环燃烧室的熄火边界变化规律类似,但在相同的工作状态条件下,全环燃烧室的贫油熄火油气比小于扇形段的相应值.     

基于模型的装备维修性设计控制技术

伴随数字化设计方法日趋成熟,飞机装备维修性设计面临如何与三维数字化设计环境下功能性能设计同步的难题。对比分析了数字化环境维修性设计与传统维修性设计的主要差别,提出了基于飞机装备数字化设计环境维修性设计流程,研究了维修性设计参数的表达模型以及维修性参数信息在三维设计数字环境中的转化、集成与利用方式。基于图论和网络节点框图,提出了一种以节点网络图、单节点维修时间模型、维修过程时间模型为表征的飞机装备维修性设计与控制方法。经实例验证,提出的这套基于数字模型的维修性设计技术,对装备在数字化设计环境下同步开展维修性设计具有一定的工程指导价值。     

基于卷积门控循环网络的滚动轴承故障诊断

针对许多基于深度学习的滚动轴承故障诊断方法在小样本数据集下诊断性能下降的问题,提出一种基于卷积门控循环神经网络的轴承故障诊断模型。该模型使用两层的卷积网络来从输入信号中提取特征,同时使用tanh函数作为激活函数,且池化层使用大池化核来进行重叠下采样。将所提取得到的高层特征连接到双向门控循环网络。合并循环网络正向和逆向的最后一个状态,并连接一层全连接层进行输出。选用凯斯西储大学的轴承故障数据集来验证模型在小样本数据集下的诊断性能,实验结果表明,相比于其他类型的模型,该模型在仅有20个训练样本的情况下依然保持97%的识别准确率。      

离心式同向双旋流器空气雾化喷嘴雾化特性研究

对一种组合式的离心式同向双旋流器空气雾化喷嘴喷雾特性进行研究.双旋流器采用旋向相同的径向开孔式设计,在常温常压下试验,研究不同空气压力降和喷嘴供油压力工况下液雾的索太尔平均直径及分布指数.试验中以航空煤油为介质测试其雾化性能,采用马尔文激光测雾仪测量喷嘴下游50 mm处的液雾分布.结果表明:随着空气压力降和喷嘴供油压力的增大,索太尔平均直径减小,分布指数增大,推导了在空气压力降Δp/p＞3%和Δp/p＜3%两种工况下索太尔平均直径计算模型.      

Mean energy of response to galactic cosmic ray spectrum: IMP 8 and Climax neutron monitor

Solar modulations of galactic cosmic ray (GCR) intensity contain a wealth of information about their transport in the heliosphere. To extract this information from the data one studies the dependence of the observed modulations on the mean energy of response of detectors providing data for the analyses. There is a great deal of confusion about the detector energy response to GCR spectrum in the literature. We present a preliminary report on the computations of the mean energy of response for the Climax neutron monitor (CL/NM) and IMP 8 cosmic ray nuclear composition instrument to GCR protons for 1973–1998, covering the solar cycles 21 and 22. We find that for penetrating proton channel on IMP 8 the mean energy changes by a factor of over two whereas for the neutron monitor the change is only 21%. However, the corresponding change for the computed modulation function is a factor of about 3.5.     

两个母体均值之差的区间估计

介绍了对已知母体方差和未知母体方差的两个正态母体及不服从正态分布的两个母体等三种情况的均值之差 μ1- μ2 进行区间估计的原理、方法并给出应用实例     

Neural Network aided PMSM multi-objective design and optimization for more-electric aircraft applications

This study uses the Neural Network(NN) technique to optimize design of surfacemounted Permanent Magnet Synchronous Motors(PMSMs) for More-Electric Aircraft(MEA)applications. The key role of NN is to provide dedicated correction factors for the analytical PMSM mass and loss estimation within the entire design space. Based on that, a globally optimal design can be quickly obtained. Matching the analytical estimation with Finite-Element Analysis(FEA) is the main research target of training the NN. ...     

基于频谱仪的脉冲调制信号功率校准技术研究

脉冲调制信号是雷达和数字通信系统中的一类重要信号。本文主要研究脉冲调制信号的功率测量方法,讨论并分析了脉冲调制信号的频谱特点,提出使用频谱分析仪实现脉冲调制信号的平均功率和峰值功率的测量,并采用正弦调幅法对频谱分析仪的测量结果进行验证。实验表明使用频谱仪测量脉冲调制信号功率简单易行且具有较高的测量精度。