Investigation of the differential rotation of the large-scale magnetic elements for the solar activity cycles 20 and 21

The differential rotation of the patterns of the large-scale solar magnetic field during solar activity cycles 20 and 21 is investigated. Compact magnetic elements with the polarity of the general solar magnetic field have larger speed of rotation than the elements with the opposite polarity. The surface of the Sun was divided by 10°-zones. In all of them the average rotation rate of the magnetic elements with negative polarity is little higher than that of the magnetic elements with positive polarity, except for 50°-zone of the south hemisphere and at the 10° latitude of the north hemisphere.

The rates of differential rotation for large-scale magnetic elements with negative and positive polarities have similar behavior for both cycles of the solar activity.

The rotation rate varies at polarity reversal of the circumpolar magnetic fields. For the cycle No 20 in 1969–1970 the threefold reversal took place in the northern hemisphere and variations of rotation rate can be noticed for magnetic elements both with positive and negative polarity for each 10°-zone in the same hemisphere.     

复合材料元件吸能能力的数值模拟

运用MSC／DYTRAN有限元软件，对碳纤维一环氧树脂“┼”字型、“┬”字型、“┐”字型3种典型复合材料元件的破坏过程、峰值栽荷、平均栽荷和能量吸收能力进行了数值模拟研究。鉴于MSC／DYTRAN有限元软件不能直接用于复合材料的吸能分析，分析时采用了等效的方法。将复合材料结构元件的数值计算结果与准静态轴向压溃试验的结果进行对比，两者较为一致，从而说明运用该有限元软件并采用等效的方法模拟复合材料结构吸能能力的可行性。     

Phase Space Density Analysis of Energy Transport in the Earth’s Magnetotail

Two energetic events in the Earth’s magnetotail detected by Geotail are examined with detailed analysis of three-dimensional velocity phase space density. It is found that the occurrence of multiple ion components is high during these dynamic episodes. Different populations evolve independently of each other, suggesting particles from multiple activity sites contributing to the observed phase space density. The transport properties with consideration of multiple components are evaluated, with the result showing significant differences from those based on a single fluid approach. This comparison indicates that precise evaluation of the energy and magnetic flux transport of energetic events in the magnetotail requires resolving individual populations in the phase space density.     

An equilibrium multi-objective optimum design for non-circular clearance hole of disk with discrete variables

An Equilibrium Multi-objective Optimization Model(EMOM) with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk. In the ‘‘equilibrium design", both the stress decrease around the hole and the least hole's profile variation are considered, which balances two ambivalent design goals. Specific discrete variables are applied to realize the standardization design in the optimization process, in which a Surrogate Genetic Coding Algorithm(SGCA) is introduced, and a special check module is used to get rid of repeated fitness evaluation of the samples. The method offers an equilibrium design for the non-circular clearance hole of the turbine disk with great accuracy and efficiency.     

飞机大部件自动对接同步调姿方法

提出了飞机大部件自动对接同步调姿方法,实现了大部件调姿基准点的连续自动跟踪测量和位姿连续调整.在此基础上开发了集测量场构建、大部件位姿解算和调整等功能于一体的大部件自动对接集成控制软件,并在ARJ21飞机翼身自动对接现场进行了应用试验,结果证明该方法能有效完成飞机翼身自动对接过程,提高测量和对接效率.     

蜂窝结构环形件的微型点焊

介绍了蜂窝环形构件微型点焊的电极、设备及工艺过程,分析了焊点质量,发现了条形蜂窝件的质量问题对点焊过程的影响,并提出了相应的解决措施。     

涡扇发动机部件特性的BP网络研究

在发动机特性计算中,建立了BP神经网络对部件特性数据进行识别学习,实现了特性数据的精确插值和对未知特性数据的推测。通过对网络输出结果的检验与分析,表明该方法精确实用。      

基于空中交通管制运行品质的扇区容量评估

扇区容量反映的是扇区空中交通管制运行品质诸多要素综合寻优下的流量水平,目前将扇区管制员工作负荷阈值映射为扇区容量的评估方法存在片面性。为改善扇区容量评估方法,以成都进近南扇为研究实例,采集198组实际运行数据建立样本集,确立了涵盖空中交通流密度、管制运行安全性能、管制运行效率性能及管制员工作负荷等4类因子的管制运行品质量化指标,并基于主成分分析法实现了扇区管制运行品质综合评价,经函数拟合确定扇区容量为29架次/h,新方法更具科学性、客观性。     

卫星构件用M40J/ BA204 复合材料性能

针对卫星构件的不同需求,开发了一种芳香胺固化的环氧树脂BA204.研究了无溶剂及溶剂法成型的M40J/BA204复合材料力学、真空放气性能和管件在模拟温度交变条件下的性能变化情况.结果表明:两种方法制备的复合材料力学性能均能满足卫星构件要求,无溶剂法制备的复合材料力学性能优于溶剂法.采用无溶剂法制备的M40J/BA204复合材料其真空质损率为0.23％,可收集挥发性凝聚物为0.009％;复合材料管件经200次热循环冲击后力学性能变化不大,表明M40J/BA204复合材料具有良好的热稳定性.