航空发动机电子控制器可测试性技术应用研究

基于边界扫描的测试思想,提出了1种航空发动机电子控制器可测试性设计方案。通过器件管脚的边界扫描单元,在板级甚至多个目标板组成的复杂系统间,构建了1条在集成电路边界绕行的移位寄存器链,可以实现复杂集成电路的嵌入式测试。该方案还可以实现故障注入,对航空发动机电子控制器机内自测试(B IT)能力进行验证。     

并行原位自适应建表方法在超燃计算中的应用

分别采用直接积分方法(DI)和并行原位自适应建表方法(ISAT)对二维超声速燃烧室进行了计算,并与试验结果进行了比较。从对比结果可以看出,ISAT方法和DI方法计算的压力和组分分布结果基本一致,壁面压力分布与试验结果相吻合,能够满足计算的精度要求。在本文并行计算环境下,和DI方法相比,在化学反应计算速度上,ISAT方法最低提高了3.34倍,最高达到约40倍。     

基于星载毫米波顺轨-交轨InISAR的空间运动目标三维成像技术研究

研究了低信噪比情况下的星载毫米波顺轨/交轨In\|ISAR空间目标三维成像问题。由于传统的RD成像算法在目标尺寸较大和分辨率要求较高时不能取得较好的成像效果,故将波数域成像算法引入运动目标成像处理以获得高分辨率的二维图像,继而将顺轨/交轨三天线ISAR图像分别进行干涉处理,获得了目标上各散射点的三维位置。作为二维成像、图像配准等重要环节的基础参数,对低信噪比下的目标检测和三维运动参数估计进行了研究,分析了速度估计精度要求。最后,仿真结果表明了顺轨/交轨In-ISAR系统的有效性。     

遥测数据处理系统码同步器的仿真及PLD实现

介绍了简易遥测站重要组成部分 PC机遥测数据处理系统 ,阐述了利用高密度、高速度的在系统可编程器件 isp L SI及其仿真软件 SYNARIO设计系统中码同步器的方法和成效     

Study of the rheological properties of water and Martian soil simulant mixtures for engineering applications on the red planet

The rheological properties of mixtures of water and the Martian soil simulant JSC-Mars-1A are investigated by preparing and testing samples at various solids concentrations. The results indicate that the dispersion is viscoelastic and, at small timescales (～0.1?s), reacts to sudden strain as an elastic solid. At longer timescales the dispersion behaves like a Bingham fluid and exhibits a yield stress. Hysteresis loops show that rapid step-changes (2?s duration) of shear-rate result in thixotropic behaviour, but slower changes (>10?s duration) can result in rheopexy. These observations are explained with the breakdown and recovery of the packing structure under stress. The rheological information is used to generate practical tools, such as the system curve and the Moody chart that can be used for designing piping systems, and calculating pump sizes and pressure requirements.     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

BBO单晶生长过程中气相包裹体形成的实时观察研究

BBO单晶生长过程中包裹体的出现是影响晶体质量及制约晶体尺寸的一个重要因素.利用高温休伦微分干涉显微技术,实时观察了BBO助溶剂法生长过程中出现的气相包裹体的形成过程.结果表明,包裹体产生于完美晶体内部,并趋向于分布在界面附近,单晶生长过程中台阶的发展将有助于制约气相包裹体的形成和分布.      

空间非合作目标未知构型重建质量评估方法

针对基于线阵激光雷达扫描重建获得的三维模型,因其构型未知,无法通过模型对比进行质量评估,本文着重研究未知构型的质量评估方法。首先,采用3σ优化的最小二乘法对空间非合作目标点云平面与直线进行拟合;其次,从点云密度、重建几何性质、表面完整度进行重建质量评估,再基于上述三种评估方法建立多因素综合评估数学模型,对三维重建结果进行满意度质量评估;最后通过仿真实验验证评估方法,获得多因素综合评估满意度为95.5889%,实验结果表明该评估方法合理且具有参考价值。该研究不仅能验证基于线阵激光雷达三维重建结果的精度,还为空间非合作目标未知构型质量评估提供一种新的研究思路。     

论远程高校教师校本培训模式的构建

在分析远程高校教师校本培训现状的基础上,提出远程高校教师要构建自组织与被动组织相结合的机制,充分利用远程式的培训技术和方式,设立教师培训专项基金,建立专家引领的培训模式,使远程高校教师校本培训得以健康发展.