排序方式: 共有26条查询结果,搜索用时 31 毫秒
1.
幂律型流体的雾化过程存在复杂的界面运动,用传统网格法很难精确追踪运动界面.为研究幂律型流体的雾化特性,运用SPH方法对典型的双股幂律型流体撞击雾化问题进行三维数值分析.根据文献实验,采用SPH方法模拟获得与实验条件相应的数值结果,对比后表明,二者雾化角相当吻合,数值结果还成功捕捉到液膜向液丝的破碎过程及网状的液丝分布状态,验证了方法的有效性.分析了射流速度和撞击角度对雾化角的影响,得到雾化角随着射流速度和撞击角度的增加而增大;对雾化后的速度场进行数值分析后表明,撞击点附近,惯性力的作用使速度场变化剧烈;在流体远离撞击点的过程中,粘性耗散作用使速度场趋于稳定,但速度大小小于初始撞击速度. 相似文献
2.
带有微尘的空气进入航空发动机,极易在涡轮叶片内冷通道发生沉积。为探究微尘沉积形貌对涡轮叶片内冷通道换热特性的影响,选取冲击气膜冷却结构,基于微尘沉积实验结果,构造微尘沉积形貌,由锥状突起和环状突起组成,通过数值模拟获得不同射流雷诺数下冲击靶面努塞尔数Nu。研究结果表明,冲击靶面微尘沉积层的出现,将大幅降低浸润面积平均努塞尔数Nuwetted,而对映射面积平均努塞尔数Nuavg影响较小;冲击驻点周围的高换热区范围减少;相邻冲击孔中点附近的高换热区努塞尔数Nu增大;此外,射流雷诺数的增大整体上提高了冲击靶面的换热强度。由于锥状突起和环状突起的扰动作用, 壁面附近回流涡增多, 使得冲击靶面大部分区域温度边界层厚度增加,因此换热性能降低。 相似文献
3.
卫星推力器布局方式对高空羽流撞击效应的影响研究 总被引:2,自引:2,他引:2
通过对高空羽流流场及其撞击效应进行一体化DSMC仿真,得到了三维羽流场中物理量的分布以及羽流撞击干扰物产生的撞击力、力矩、热流量和质量流量。通过改变推力器与干扰物的相对位置研究了推力器布局方式对羽流撞击效应的影响。 相似文献
4.
Coupled Lagrangian impingement spray model for doublet impinging injectors under liquid rocket engine operating conditions 总被引:2,自引:0,他引:2
To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines. 相似文献
5.
采用数值模拟方法研究了延伸冲击孔冲击冷却系统的冷却特性,分析了3个冲击雷诺数和5个冲击孔延伸长度对冲击腔内流动与换热特性的影响,给出了靶面努塞尔数分布、靶面压力分布、中心截面流速与综合换热性能的变化。结果表明:延伸冲击孔可以有效地防止横流对冲击射流的偏转作用,同时使射流出口更加贴近冲击靶面壁面,冲击速度更高,可以明显提高靶面的换热系数,并使整个靶面上的换热系数分布也更加均匀。冲击冷却的冷却性能随着冲击孔延伸长度的增加而增加,相较于传统冲击冷却(baseline),在L/d=2.5时靶面平均努塞尔数提升达15%以上,但压力损失也相对较高;对比不同延伸长度冲击孔的综合换热性能,发现存在最佳的L/d取值范围使冲击冷却系统获得最佳的综合冷却性能。在本研究范围内,最佳的L/d= 2.5。 相似文献
6.
7.
8.
为了研究射流冲击对扰流柱通道内壁面的换热,以及射流孔板与扰流柱前缘的距离对通道换热的影响规律,采用薄膜加热片作为加热器提供等热流边界条件,对带射流孔板的矩形扰流柱通道进行了换热实验。实验结果表明在通道中布置扰流柱可以明显增强通道换热,且在扰流柱排前放置射流孔板可进一步对换热进行强化。实验还发现,射流孔板与扰流柱的间距不同,对通道换热的影响不同;在间距相同的情况下,射流孔板对不同位置的扰流柱换热的影响程度也有所差异。 相似文献
9.
10.
叶片前缘旋流和常规冲击对比数值研究 总被引:3,自引:2,他引:1
为了寻求更好的叶片前缘内冷结构,对旋流冲击和常规冲击的流动和传热特性进行了数值模拟,对比研究了二者的涡流结构、传热强度、流动阻力、综合传热性能和热均匀性,研究了通道Re数和冲击间距对这些参数的影响。结果表明旋流冲击形成的旋涡有利于传热的增强和热均匀性的提高。在所研究的Re数(2×104~7.78×104)和冲击间距(3.3~5倍直径)范围内,旋流冲击与常规冲击相比平均传热增强18%~34%,增幅随Re数和冲击间距的增大而增大;流阻增大10%~26%,增幅随Re数和冲击间距的增大而减小;综合传热性能增强20%左右;热均匀性提高60%左右。 相似文献