基于关联分析的机载电子设备SRU级故障诊断方法

针对机载设备二类检测设备将故障隔离到SRU的要求,对LRU的内部结构进行了分析,提出了点、底项、组底项的概念,用关联值表示点与点之间、点与SRU之间及组底项之间的关联关系;针对多SRU结构UUT,提出逐级排除法故障诊断方法.     

空间碎片超高速撞击极限穿透比动能研究

研究建立宅间碎片对目标超高速撞击条件下临界穿透靶标的损伤特性的理论模型。基于临界穿透过程的数值模拟结果，系统分析了初始条件与临界穿透的关系，捉出碎片临界穿透靶板的比动能概念。然后分析了临界穿透下的碎片比动能，认为比动能是速度的函数。最后，考虑碎片的实际撞击过程巾最大着靶面积为变形面积，对比动能进行修正，获得了极限穿透条件下的真实比动能与速度无关的结论。     

捷联惯性测量组合综合评估方法研究

简要论述了捷联惯性测量组合评估系统在小样本下的性能评估方法,给出了小样本下正态性分布结构和采用随机加权的评估算法。采用此评估方法可以实现对惯组的综合性能的分析与评估,对落点偏差的分析预测,从而实现对射前优选惯组的辅助决策。     

Petri网及其在FMS建模中的应用

本简要介绍了Petri网的原理，及其在FMS建模中的应用。     

飞机平尾偏角引动量的自动检测

根据飞机纵向操纵系统工作原理和纵向平飞操纵原理，推导了平衡速度与平尾偏角的关系式，分析了操纵杆力、平衡速度、平尾偏角的相互关系及平衡速度的调整原理。结合平尾偏角检测现状，提出了一种利用机械臂自动检测飞机平尾偏角的方法，成功研制了平尾偏角自动检测仪，并用于平衡速度的调整。反复检测表明：该检测仪可取代目前广泛使用的人工检测方法，提高了飞机维修保障能力，具有较大的推广前景。     

某起落架正常收／放系统失效原因分析

正确运用246雷达天线“正常或应急”液压操纵开关和液压马达壳体回油“正常或应急”开关的工作状态，关系到飞机液压操纵系统的安全性。若天线液压操纵开关和马达壳体回油开关配合不当，将引起飞机液压操纵系统失效。     

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

基于卷积门控循环网络的滚动轴承故障诊断

针对许多基于深度学习的滚动轴承故障诊断方法在小样本数据集下诊断性能下降的问题,提出一种基于卷积门控循环神经网络的轴承故障诊断模型。该模型使用两层的卷积网络来从输入信号中提取特征,同时使用tanh函数作为激活函数,且池化层使用大池化核来进行重叠下采样。将所提取得到的高层特征连接到双向门控循环网络。合并循环网络正向和逆向的最后一个状态,并连接一层全连接层进行输出。选用凯斯西储大学的轴承故障数据集来验证模型在小样本数据集下的诊断性能,实验结果表明,相比于其他类型的模型,该模型在仅有20个训练样本的情况下依然保持97%的识别准确率。      

MEMS传感器在航空综合电子备份仪表中的应用

概述微机电传感器的技术现状和在IESI中的应用.通过国外典型IESI产品,着重分析了IESI的组成原理、性能特点和微机电传感器的作用.研究表明:包括高精度微机电惯性敏感器、微硅压力计在内的微型传感器开发是IESI的技术关键,国产化IESI设备在军/民用飞机中有广泛的应用前景.