燃气收缩式作动器--一种新颖高效的着陆缓冲装置

文章介绍一种新颖的着陆缓冲装置——燃气收缩式作动器。可是在回收物体乘降落伞着陆前,通过回收物体快速向上（向降落伞方向）提升,抵消物伞系统的垂直下降速度,从而达到回收物体以很小的速度着陆,实现回收物体的软着陆。     

腐蚀对sic/Al(L2)和sic/Al-Ni复合丝力学性能的影响~①

本文对SiC/Al(L2)和SiC/A1-Ni复合丝在蒸馏水和在3.5％NaCl溶液中的耐腐蚀性能进行了研究。通过测试腐蚀前后复合丝的抗拉强度,利用气相色谱、发射光谱、X射线衍射等手段分析腐蚀气体和腐蚀产物,观察金相和扫描电镜下形貌的变化,发现SiC/A1复合丝在室温蒸馏水中36天、50℃和75℃蒸馏水中各15天浸泡后,其抗拉强度基本保持不变,说明该类复合材料对潮湿环境具有良好的耐腐蚀性能;SiC/A1-Ni复合丝在3.5％NaC1溶液中浸泡后,其抗拉强度随溶液温度升高和时闻延长而逐渐下降;其腐蚀主要是选择性腐蚀,其次是孔蚀和缝隙蚀。     

战术导弹垂直发射系统的现状及发展趋势

介绍了垂直发射装置通用化、箱式化和模块化的总体特征。详细论述了国外现役8种类型的垂直发射系统，根据基本结构特点将垂直发射装置分为模块式结构、独立布置的分离式结构和旋转式结构，另依据发射动力将垂直发射装置分为热发射和冷发射。以热发射的同心筒式结构和冷发射采用的大倾角、模块化设计为例．分析了垂直发射装置的发展趋势。     

Instability and unsteadiness of aircraft wake vortices

This paper presents a review of theoretical and experimental results on stability and other unsteady properties of aircraft wakes. The basic mechanisms responsible for the propagation and the amplification of perturbation along vortices, namely the Kelvin waves and the cooperative instabilities, are first detailed. These two generic unsteady mechanisms are described by considering asymptotic linear stability analysis of model flows such as vortex filaments or Lamb–Oseen vortices. Extension of the linear analysis to more representative flows, using a biglobal stability approach, is also described. Experimental results obtained using LDV, hot wire and PIV in wind tunnels are presented and they are commented upon the light of theory.     

新型超高强度钢G50热变形与组织性能的关系

研究了新型无钴超高强度钢G50经不同锻造比墩粗锻造后材料的组织及性能的变化情况，并检验该新材料随锻造及热变形的能力。结果表明，该新材料具有非常好的可锻性及热成形性，且不同锻造比锻造并按标准制度热处理后的性能相差不大。     

卷筒钢丝绳松弛实验研究

对提升机卷筒钢丝绳的应力松弛现象进行了实验研究 ,由此建立了卷筒钢丝绳的粘弹性本构关系 ,其结果对于提升机卷筒的结构设计有着重要的指导意义     

Corrosion mechanism investigation of TiN/Ti coating and TC4 alloy for aircraft compressor application

It is imperative to develop multifunctional erosion and corrosion resistant coatings for compressor blades of aircraft engines in harsh environment. PVD (Physical Vapor Deposition) technology has the advances in processing erosion-resistant coatings; however, the performance of PVD coatings to combat corrosion depends on various coating defects. Determining and comparing the corrosion performances of PVD TiN/Ti coating and uncoated TC4 alloy was the main objective of present work. The 960 h salt spray corrosion and 116 h hot corrosion tests were conducted to simulate the grounding and working environments of the aircraft compressors. The corrosion mechanisms due to the coating defects such as pinhole, columnar boundary and large grain were analyzed based on the OM, Confocal microscope, electrochemical measurements, SEM, XRD and EDS results. Owing to the disordered state associated with the columnar boundary and the coating defect, nitrogen could be easily replaced by oxygen in the hot corrosion process, these structures were channels for fast diffusion of oxygen. Moreover, the Gibbs energy changes of Ti oxidation and TiN oxidation were thermodynamically calculated according to the working condition of aircraft compressors, and considerable research effort was focused on mapping out the phase diagram of Ti, TiN and high pressure gases. The findings of this research can provide insights into developing multifunctional coatings for future aircraft engines.     

MA 及原位-热压合成TiC/ Ti5 Si3 复合材料

以Ti粉、Si粉和C粉为原料,利用高能球磨及热压工艺合成了TiC/Ti5Si3陶瓷复合材料。研究了工艺条件尤其是热压温度对合成产物相组成及微观结构的影响,并结合DSC、XRD和SEM对反应合成机理进行探讨。结果表明:通过优化合成工艺,高能球磨12 h,热压温度1 400℃时,烧结6 h得到了高纯度的TiC/Ti5Si3陶瓷复合材料;合成过程为:反应开始时发生Ti+C■TiC,反应ΔG=-167.72 kJ/mol。2 h时发生5TiC+8Si■Ti5Si3+5SiC,反应ΔG=-62.12 kJ/mol,当6 h时发生3SiC+8Ti■Ti5Si3+3TiC,反应ΔG=-697.8 kJ/mol。显微结构表明:TiC/Ti5Si3复合材料的合成过程伴随Si熔融,该材料以TiC-Si-Ti5Si3形式相结合,其中Si为黏结剂。     

三自由度柔性并联机器人运动参数检测系统开发

以线尺传感器为采集单元,以RTLinux为开发平台,建立了平面三自由度柔性并联机器人运动参数检测系统,实现了机器人动平台运动位姿的实时获取。设计并完成了柔性系统下的高速、高加速轨迹实验,通过实验结果与仿真结果的对比,表明该检测系统实时性强,可靠性高,可以为平面三自由度柔性并联机器人全闭环实时控制提供支持。     

热氧、湿热和热水老化对T300/ BHEP 复合材料玻璃化转变温度的影响

通过对碳纤维/环氧复合材料(T300/BHEP)进行热氧、湿热和热水老化研究,得到了材料的质量变化率和Tg随老化条件的演变规律,分析了老化机理.结果表明:T300/BHEP复合材料在热氧老化条件下,因后固化和自由体积收缩,Tg升高;在湿热和热水老化条件下,因水分塑化作用和水对分子链间氢键的破坏,Tg降低.三种老化条件下,Tg与质量变化率均呈线性关系.对比80℃热氧、80℃/RH75%湿热和80℃热水老化条件下的结果,发现水分的塑化作用对Tg的影响要大于因热的作用产生的后固化,且湿度越大,Tg降低越明显.