基于T-S模糊模型的模糊大系统的混合滤波

针对非线性大系统内部过程参数的检测估计,采用连续模糊大系统模型,利用lyapunov定理和分布式处理方法,给出了模糊大系统的H2/H∞混合滤波器设计方法。该方法在保证滤波误差系统全局稳定的同时,具备了H2/H∞性能。通过求解线性矩阵不等式,可以得到滤波器参数。最后,用一个数值例子验证了该方法的正确性和有效性。     

基于H∞方法的控制系统作动器最优控制仿真研究

在设计控制系统模型时,首先引入了有限差分法(FDM)离散化后的波动方程,然后基于H∞最优控制原理,检查闭环控制系统的稳定性和可探测性,对控制系统传感器和作动器的位置进行优化配置.通过计算闭环反馈系统的范数,最终得到了控制系统的最优控制算法.仿真结果表明,利用波动方程来优化控制系统传感器和作动器位置的算法是可行的,可广泛应用于飞控系统的设计中.     

Cross-sectional deformation behavior of double-ridged rectangular tube with fillers in different stages of H-typed bending

The bent double-ridged rectangular tube (DRRT) with high forming quality is helpful to improve the microwave transmission accuracy. For reducing the cross-sectional deformation in the H-typed bending process, in addition to using rigid mandrel to support the inside of tube, ridge groove fillers are also added to restrict the deformation of ridge grooves. Because of the change of stress and strain state of bent tube in bending, rigid mandrel retracting and specially twice-springback stages, and the springback of fillers, the cross-sectional deformation of tube in each stage may be different. Therefore, based on the ABAQUS platform, the finite element models (FEM) for H-typed bending, mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated. It is found that, for the height and width deformation of tube and spacing deformation of ridge grooves, retraction of mandrel can make the distribution of these deformations more uniform along the bending direction. The first springback can reduce these deformations significantly, which should be emphasized. But the second springback only increases them by less amount, which can be ignored. The smaller height deformation of ridge groove and filler can be neglected.     

Temperature Fluctuations,H II Region Abundances,and Primordial Helium

There is evidence for temperature fluctuations in Planetary Nebulae and in some Galactic H II regions. If such fluctuations occur in the low metallicity, extragalactic H II regions used to probe the primordial helium abundance, the derived 4He mass fraction, YP, could be systematically different from the true primordial value. Although this effect could be large, there are no data which allow us to estimate the size of the temperature fluctuations for the extragalactic H II regions. Therefore, we have explored this effect via Monte Carlo simulations of the data in which the abundances derived from a fiducial data set are modified by T chosen from a distribution with 0 T Tmax where Tmax is varied from 500 K to 4000 K.     

Effects of the Fabrication Processes of NC-Si:H Films on Their Mechanical Properties

Studies of nanoindentation were performed on nc-Si:H films to evaluate the effects of the fabrication processes on their mechani-cal properties. It is observed that with the decrease of the SiH4 contents, the grain size of the films increases gradually, and as does the crystalline volume fraction. The smaller the grains become, the more homogeneous the films, and the more even the hardness as well as the modulus will be. The hardness and the modulus will increase with the substrate’s temperature rising. The hardness and the modulus of the nc-Si:H films on the Si substrate prove to be higher than those on the glass substrate given the same technology parameters. How-ever, the films on the glass substrate appear to be more homogeneous.     

H_∞滤波算法及其在GPS/SINS组合导航系统中的应用

 在对 H∞ 估计问题进行数学描述的基础上,建立了一种 H∞ 次优滤波算法的迭代方程。定性讨论了H∞滤波算法与传统 Kalman滤波器的关系,通过在 GPS/SINS组合系统中的实际应用进一步从精度、鲁棒性等性能指标方面对 H∞ 滤波和 Kalman滤波算法进行了比较。仿真结果表明,在理想条件下,Kalman滤波方法具有较高的精度;但是,当系统模型和外部干扰统计特性发生变化时,H∞ 滤波算法明显具有良好的鲁棒性能,同时,估计精度也较高,有效地克服了 Kalman滤波器存在的局限性。     

基于传热反问题方法的N_2O/C_2H_4预混推进剂燃烧室热流测量研究

测量液体火箭发动机的热载荷是获取燃烧室内部信息的重要方法。为了获取N_2O/C_2H_4预混推进剂燃烧室内壁的热载荷,建立了液体火箭发动机的热流计算的反问题方法,该方法基于对燃烧室壁面温度场的直接求解,通过对轴向多个位置测量温度的反演计算得到燃烧室内壁热流和温度。研究表明:应用文中建立的传热反问题方法能够较为准确地获得热流随时间及空间的分布;热电偶的位置对计算准确性有明显的影响,与理论深度偏差在0.2mm以内的随机深度偏差可导致超过4%热流反演误差;N_2O/C_2H_4预混推进剂燃烧室热流及温度沿轴向逐渐降低,表明燃烧室内的反应释热过程主要在燃烧室头部附近发生。     

基于偏振约束的立体视频快速运动估计算法

分析了平行双目立体摄像系统的偏振约束特性,提出了一种基于偏振约束的立体视频快速运动估计算法.左通道和右通道分别作为基本层和增强层,对右通道结合视差估计和运动估计得到最优的运动矢量预测值初值,采用不同的运动搜索方法,确定右通道最终运动矢量.若最优的运动矢量预测值是由视差估计得到的左通道运动矢量,则根据偏振约束,左右通道图像对应编码块的运动矢量在垂直方向上的分量相等,因而右通道只在水平方向上进行小范围的运动估计搜索,从而大大降低了右通道运动估计的计算复杂度.实验结果表明,在相同条件下,采用该算法编码一帧图像的运动估计平均时间分别只有采用全搜索块匹配算法、钻石搜索法和三步搜索法的0.27,0.58和0.67倍,编码速度得到显著提高.     

H.264中多模式运动估计算法优化

针对H.264标准的多模式运动估计算法编码模式复杂、计算量大的不足,通过对H.264参考模型JM10中运动估计算法的分析,提出了一种利用时间、空间相关性的模式选择算法和结合一维绝对差值和(SAD,Sum of Absolute Difference)的高效匹配准则,将串行全搜索的运动估计算法改进为并行部分搜索的运动估计算法,把一维SAD和二维SAD匹配准则结合使用,从模式选择和编码速度两个方面对原算法进行优化.实验结果表明:与参考模型JM10的运动估计算法相比,提出的优化算法在恢复质量(用峰值信噪比表征)平均下降0.03 dB、码速率增加不超过1.5%的前提下,编码速率提高20%~30%,表明了该算法在恢复质量略有下降的情况下明显提高了编码速度.      

Formation and Role of H2O2 During Ozonation of Nitrobenzene

To better understand the formation of H2O2 in the ozonation of nitrobenzene and its role for the oxidation,a batch reactor of nitrobenzene ozonation was set up.The variables such as pH value,ozone dosage,and the presence of hydroxyl radical scavenger were investigated.The results showed that high accumulations of H2O2 were generally formed at low pH values and low ozone dosages.Moreover,H2O2 mainly formed after nitrobenzene was oxidized by hydroxyl radical during ozonation of the intermediates,such as p-nitrophenol,which reacted with ozone quickly in water.A small amount of additional H2O2 enhanced the nitrobenzene removal slightly.The kinetic study showed that nitrobenzene degradation fitted with pseudo-second-order kinetics well in the experiment.The kinetic constant values correlated linearly with the concentrations of H2O2 added.Thus,it is expected that the H2O2 formed in oxidation of nitrobenzene may initiate ozone decomposition to form hydroxyl radical and finally enhance the degradation of aromatic compounds to a certain extent.