Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

Modelling of Ejecta as a Space Debris Source

When a micro-debris or a micrometeoroid impacts a spacecraft surface, a large number of secondary particles, called ejecta, are produced. These particles can contribute to a modification of the debris environment: either locally by the occurrence of secondary impacts on the components of complex and large space structures, or at great distance by the formation of a population of small orbital debris. This paper describes firstly, the ejecta overall production, and secondly, the lifetime and the orbital evolution of the particles. Finally the repartition of ejecta in LEO is computed. Some results describing the population as a function of size and altitude are presented.     

正交射流煤粉燃烧器冷态流场的数值计算

本文采用ｋ－ε双方程湍流模型对正交射流煤粉燃烧器出口三维湍回流流动进行了数值研究，得到了副射流与主流速度比为２。５时的正交射流尾迹流场持速度分布、回流特性，并比较了不同速度比时的流场计算结果。计算结果与实测数据符合较好，所得结论对分析正交流燃烧器的稳燃机理具有一定作用。     

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

一种超声速状态下机载推进系统模型的建模方法

为了满足机载航空推进系统模型对精度、实时性及数据存储量的苛刻要求,提出了一种机载模型建模方法.对传统的机载稳态模型建立过程中使用的相似准则进行了充分讨论,得出了一种具备更高建模精度的相似准则.在新的相似准则基础上,建立了包含泰勒展开式中非线性2阶项的高精度稳态变量模型,有效解决了分段线性稳态变量模型在大包线、变状态条件下精度难以保证的问题;为了解决超声速状态下安装推力与发动机净推力差别较大的问题,建立了考虑外流特性的简化进气道模型,给出了一种计算安装推力的方法,即由简化发动机模型计算安装推力中符合相似准则的部分,由进气道模型计算溢流阻力、放气阻力及发动机推力中不符合相似准则的部分.仿真结果表明:基于新的相似准则所建立的机载模型具有大包线、变状态适应性,输出参数误差均在0.5%以内.      

砂布轮柔性抛光力的建模与参数优化

砂布轮柔性较大可以实现航空发动机叶片微面切触自适应抛光,提高叶片表面完整性和力学性能。抛光力是影响抛光表面完整性的关键参数,通过单因素试验分析确定了砂布轮抛光力的影响参数及其影响规律,通过正交试验和极差法确定了影响抛光力的主要参数是砂布轮的压缩量和转速;利用二元二次回归正交试验得出了抛光力的预测模型,利用该模型分析了抛光力预测误差变化趋势,明确了不同转速下抛光力主要影响参数的稳定域;整体叶盘的抛光试验表明：通过合理控制抛光力,可以实现表面粗糙度小于0.4 μm的抛光效果,且效率比人工提高20%。     

基于离散事件方法的AFDX建模与仿真

采用了建模仿真的方法来分析航空电子全双工交换式以太网(AFDX,Avionics Full Duplex switched ethernet)协议.通过对AFDX协议的抽象,基于离散事件的建模方法,以基本的网络元素来抽象化网络中的端系统、交换机等设备,以离散事件来描述网络设备的行为,以此构建了AFDX网络模型,并依据模型实现了仿真.网络演算是一种理论计算AFDX最坏延迟界限的方法,将典型场景下仿真得到的结果与理论计算的结果进行比较,验证了模型.通过不同流量方案下仿真结果的对比,对AFDX进行了传输特性的分析.      

一体化数字液压作动系统的建模仿真和控制

随着机电液控集成一体化技术和数字液压技术的发展,基于数字缸和电液泵提出了一种新型的一体化数字液压作动系统,阐述了其系统组成和工作原理.基于AMESim建立了电液泵、数字缸及整个系统的数学模型,分别从系统的位移响应、溢流流量、电机转速和控制阀开口等方面,与传统的采用集中液压源供油和伺服阀控制伺服油缸的作动系统进行了仿真对比分析,指出了一体化数字液压作动系统的优缺点.      

A new global version of M(3000)F2 prediction model based on artificial neural networks

A new version of global empirical model for the ionospheric propagation factor, M(3000)F2 prediction is presented. Artificial neural network (ANN) technique was employed by considering the relevant geophysical input parameters which are known to influence the M(3000)F2 parameter. This new version is an update to the previous neural network based M(3000)F2 global model developed by Oyeyemi et al. (2007), and aims to address the inadequacy of the International Reference Ionosphere (IRI) M(3000)F2 model (the International Radio Consultative Committee (CCIR) M(3000)F2 model). The M(3000)F2 has been found to be relatively inaccurate in representing the diurnal structure of the low latitude region and the equatorial ionosphere. In particular, the existing hmF2 IRI model is unable to reproduce the sharp post-sunset drop in M(3000)F2 values, which correspond to a sharp post-sunset peak in the peak height of the F2 layer, hmF2. Data from 80 ionospheric stations globally, including a good number of stations in the low latitude region were considered for this work. M(3000)F2 hourly values from 1987 to 2008, spanning all periods of low and high solar activity were used for model development and verification process. The ability of the new model to predict the M(3000)F2 parameter especially in the low latitude and equatorial regions, which is known to be problematic for the existing IRI model is demonstrated.     

卫星设计过程信息分析的方法研究

在综合分析现有卫星设计信息分析技术的基础上,将总体数据规划的思想引入卫星设计过程的信息分析,提出了一种利用信息工程论下的总体数据规划和并行工程下的设计结构矩阵相结合的技术进行卫星设计信息分析的新方法。深入讨论了从任务分析着手构建数据模型的思想,研究了设计结构矩阵的分解和撕裂算法,并以卫星总体设计方案阶段为例,具体说明在这种方法指导下,如何实现卫星设计的信息分析。