美国MTS公司应用软件在测试上的应用

介绍了用美国ＭＴＳ公司的平面应变断裂韬度测试软件，对ＴＣ４合金进行ＫＩＣ测试的过程及结果。     

塑性动态断裂过程中梁的塑性铰转动因子的确定方法

运用理论分析方法和实测试验方法，探讨了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律，提出了断裂过程中塑性铰几何转动因子的概念及其确定方法，并以３点弯曲梁理论分析解为例，计算了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律。该计算结果与３点弯曲梁动态断理解实验实测相一致。理论分析进一步明确了梁的塑性铰转动因子具有几何与物理两种不同的本质含意，并可直接用于修正梁的塑性动态断裂的理论分析解。     

能谱变硬后的X射线对Ly12铝破坏效应的研究

用数值模拟方法讨论了X射线的能谱向短波方向变化后,对Ly12铝破坏效应的影响,对所得结果进行了分析和解释。     

A constitutive model coupling damage and material anisotropy for wide stress triaxiality

A constitutive model that can describe the damage evolution of anisotropic metal sheets during the complex forming processes which experience wide stress triaxiality history is essential to accurately predict the deformation and rupture behaviors of the processes. In this study, a modified Lemaitre damage criterion which couples with the anisotropic Barlat 89 yield function is established. The effects of stress triaxiality, Lode parameter and shear stress on damage accumulation are considered in the constitutive model. The model is numerically implemented and applied to fracture prediction in tensile tests with different stress triaxialities and a complex deformation process with wide stress triaxiality history. The good consistency of predictions and experiments indicates that the modified Lemaitre damage model has excellent fracture prediction ability. Finally, the accuracy of the model is analyzed and discussed.     

BTi-62421S 高温钛合金超塑性能及应用

对BTi-62421S高温钛合金进行了高温超塑性拉伸实验,通过研究超塑条件下的力学性能、金相组织及拉伸断口形貌,确定了该合金高温拉伸条件下的断裂机制及超塑成形最佳变形工艺参数,在此基础上进行了BTi-62421S钛合金框架零件的超塑性成形实验。结果表明:BTi-62421S钛合金在920℃,应变速率10-3/s时具有最佳超塑性能,伸长率达到448.5%;该合金拉伸断裂机制以韧性断裂为主,但在不同变形参数下伴随着不同程度的脆性断裂;在超塑条件下可以成形出满足使用要求的航天用钛合金框架零件。     

FGH97缺口试样基于黏塑性本构的弹塑性响应分析

针对缺口试样在高温条件下局部区域应力应变难于测量的问题,基于光滑试样材料力学性能试验,优化得到550℃粉末高温合金FGH97的Chaboche黏塑性统一本构方程参数,并将其应用到FGH97缺口试样单调拉伸及循环加载弹塑性有限元分析中.研究结果表明:①缺口局部区域进入塑性后其应力分布与弹性条件明显不同,随应力增大,最大应力位置向内移动;②在循环载荷条件下,随着循环数的增加,缺口平分线上应力/应变范围变化不大,缺口根部塑性区域出现明显平均应力松弛,并逐渐趋于稳定,导致缺口根部循环载荷比不同于外部施加载荷;③缺口根部塑性区域逐渐增大,但增大的幅度逐渐降低.该研究可为进一步分析缺口构件疲劳寿命影响因素提供支持.      

复合材料在DCB试验中的裂纹尺寸效应

在许多关于复合材料Ⅰ型层间断裂韧性试验研究工作中，不同的作者所选取的有效裂纹长度有很大的差异，由此带来试验结果分散程度很大，试验结果无法相互比较等问题。本文对复合材料在Ⅰ型层间断裂ＤＣＢ试验中裂纹的预裂长度、裂纹尖端形状以及裂纹测量误差等问题进行了研究。     

热障涂层中TGO的生长行为

采用等离子喷涂法在高温合金IC10上先后沉积粘结层为NiCrAlYSi,陶瓷层为Sc2O3-Y2O3-ZrO2的样品。样品在热循环炉中1100°恒温氧化,观察样品不同氧化时间的断面形貌,并绘制了样品的增重曲线,以此分析高温时TGO的生长过程。     

止裂孔尺寸对止裂效果影响的研究

当航空器结构在航线使用过程中出现疲劳裂纹损伤时,通常在裂纹尖端打止裂孔进行临时性修理。通过理论分析和计算及试验分析,研究了止裂孔尺寸对止裂效果的影响。结果表明,当航空器结构出现疲劳裂纹损伤时,采用5.57～7.14mm直径的止裂孔进行止裂修理,止裂效果较好;当止裂孔直径为6.35mm时,止裂效果最好。     

Coupling damage and reliability model of low-cycle fatigue and high energy impact based on the local stress–strain approach

Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain approach considering both low-cycle fatigue and high energy impact loads.Two coupling relationships between fatigue and impact are given with effects of an impact process on fatigue damage and effects of fatigue damage on impact performance. The analysis of the former modifies the fatigue parameters and the Manson–Coffin equation for fatigue life based on material theories. On the other hand, the latter proposes the coupling variables and the difference of fracture toughness caused by accumulative fatigue damage. To form an overall reliability model including both fatigue failure and impact failure, a competing risk model is developed. A case study of an actuator cylinder is given to validate this method.