关于Nielsen数的注记

通过构造基本群的正规子群，得到有限复迭空间和自映射的提升。并定义了NL数，指出用NL数可以估算自映射的Nielsen数。     

移相谐振PWM技术的研究

本文着重讨论在高频应用场合下的移相零电压谐振ＰＷＭ 技术,分析移相型谐振变换器、谐振腔电路及定频ＰＷＭ（脉宽调制）技术中的设计规范。     

幂等自映射的Nielsen数(4)

本文利用粘接等方法证明了一类拓朴空间上的幂等自映射的Ｎｉｅｌｓｅｎ数不超过１。     

用集成功放组成的精密功率放大器

介绍了一种用厚膜集成功放加上稳幅电路组成的精密功率放大器，其稳定度、频率响应和波形失真都达到了很高的指标。     

"回收/调节"方法在混合LES/RANS模拟方法中的应用

采用一种混合大涡模拟/雷诺平均Navier-Stokes(LES/RANS)模拟方法结合三阶加权基本无振荡(WENO)格式对马赫数为2.88的压缩斜坡流动进行了数值模拟,并采用"回收/调节"方法生成入口湍流脉动边界条件.当采用固定入口边界条件时,湍流边界层会缺乏合理的湍流能量,使之抵抗逆压梯度的能力减弱,会严重高估分离...     

红外焦平面阵列非均匀校正算法的研究

为解决固定图案噪声污染的红外焦平面图像序列的非均匀校正问题 ,文中采用时域高通滤波算法完成固定图案噪声污染图像的预处理 ,给出固定图案噪声初值 ,并结合传统的红外焦平面迭代非均匀校正算法 ,有效地解决了较高强度固定图案噪声污染图像的非均匀校正问题。与采用黑体基准获取固定图案噪声初值的方法相比 ,该算法降低了成像系统的机械复杂性 ,提高了算法的应用范围。文中最后用红外图像序列进行了验证     

椭圆的数控加工宏程序编制

根据华中世纪星数控系统及固定循环指令特点,将椭圆型腔的粗加工、精加工程序编制成固定循环格式,用户在加工过程中只需要用指令调用即可。这样在加工过程中大大缩短程序编制时间,提高数控宏程序的集成度,使数控机床高效、高精度的潜力被充分挖掘。     

A non-local vectorial total variational model for multichannel SAR image speckle suppression

This paper aims at the multichannel synthetic aperture radar(SAR)image speckle reduction.This paper proposes a novel energy minimized regularization model for multichannel image denoising,which is an extension of the non-local total variational model for gray-scale image.It contains two terms,namely the vectorial data fidelity term and the non-local vectorial total variation term.The latter is constructed by high-dimensional non-local gradient that contains the structure information of the multichannel image.The existence and the uniqueness of the solution of the model are proved.A fixed point iterative algorithm is designed to acquire the solution of this model.The convergence property of this algorithm is proved as well.This model is applied to the multipolarimetric and multi-temporal RADARSAT-2 images despeckling.The result shows that this model performs better than the original vectorial total variational model on texture preserving.     

Increased BLSS closure using mineralized human waste in plant cultivation on a neutral substrate

The purpose of this work was to study the full-scale potential use of human mineralized waste (feces and urine) as a source of mineral elements for plant cultivation in a biological life support system (BLSS). Plants that are potential candidates for a photosynthesizing link were grown on a neutral solution containing human mineralized waste. Spring wheat Triticum aestivum L., peas Pisum sativum L. Ambrosia cultivar and leaf lettuce Lactuca sativa L., Vitaminny variety, were used. The plants were grown hydroponically on expanded clay aggregates in a vegetation chamber in constant environmental conditions. During plant growth, a determined amount of human mineralized waste was added daily to the nutrient solution. The nutrient solution remained unchanged throughout the vegetation period. Estimated plant requirements for macro-elements were based on a total biological productivity of 0.04 kg day⁻¹ m⁻². As the plant requirements for potassium exceeded the potassium content of human waste, a water extract of wheat straw containing the required amount of potassium was added to the nutrient solution. The Knop’s solution was used in the control experiments.     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。