Estimating inter-system biases for tightly combined Galileo/BDS/GPS RTK

The overlapping carrier frequencies L1/E1, L5/E5a and B2/E5b from GPS/Galileo/BDS allow inter-system double-differencing of observations, which shows a clear advantage over differencing of the observations of each constellation independently. However, the inter-system biases destroy the integer nature of the inter-system double-differencing ambiguities. Two methods of direct rounding and parameter estimation are used to determine the ISB value. By analyzing data collected from Curtin University from 2015 to 2018, the phase and code inter-system bias (ISB) are related to the receiver type, firmware version and the selected overlapping frequency. Upgrade of receiver firmware version results in changes of ISB values. For example, the upgrade of Javad firmware in Dec, 15, 2017 causes the difference of 0.5 cycles ISB between BDS GEO and non-GEO satellites. By comparing the three dynamic models which include white noise process, random walk process, and random constant in the parameter estimation method, the ISB determined by the random constant model is consistent with the value obtained by the direct rounding method. After the calibration of ISBs, the performances of tightly combined positioning are assessed. The success rate of ambiguity resolution and accuracy of positioning for the tight combination (TC) are significantly improved in comparison with that for the loose combination (LC) over short baselines. For L5/E5a, on which only few satellites can be observed, the maximum increase in success rates of ambiguity resolution can reach 31.7%, i.e., from 54.9% of LC to larger than 86.6% of TC, and the positioning accuracies can even be increased by 0.13 m, i.e., from 0.208 of LC to 0.074 m of TC in East direction for the mix-receiver TRIMBLE NETR9-SEPT POLARX4 in 2018.     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

美国对其GPS采取的国策

从兼顾美国经济利益和国家安全目标、GPS及其增强系统的管理、国家安全及对外政策四个方面综合考察了美国对其GPS所采取的最新国策。     

用于高压动态校准的快开阀装置

介绍一种高压快开阀装置。它可产生３７０ＭＰａ上升时间小于２０μｓ的阶跃压力，用于对高压传感器进行动态校准。     

滚珠丝杠螺距误差补偿法提高数控机床定位精度的研究

在详细论述、对比了实现数控机床滚珠丝杠螺距误差补偿的硬件、软件方法的原理基础上,对滚珠丝杠螺距误差软件补偿法可有效提高数控机床的定位精度进行了试验验证。     

频率及频率变化率的快速最大似然估计

信号参数估计是许多领域 (如雷达、通信、导航和声钠等 )都会遇到的共同问题。文中证明 ,牛顿法是实现频率 (η)和频率变化 (β)最大似然估值器的快速有效算法 ,并且详细分析了牛顿估值器的性能。研究证明 ,对于牛顿法 ,(η,β)是以三次方律收敛于真值 (η,β)的。模拟结果表明 ,当输出信噪比 ( SNR) o≥ 15 d B时 ,估计量的均方误差 ( MSE)达到Cramer- Rao界     

一种基于移步预测消除脉冲串扰的快速算法

以毫米波主被动复合探测器为工程应用背景,通过分析信号的特点,提出一种基于移步预测思想的快速算法来消除脉冲调制信号对被动通道信号的串扰。仿真分析和实验结果表明,该方法对改善信噪比效果明显,而且具有成本低、速度快和易于工程化实现的优点。     

多重直扩信号的快速捕获

多重直扩信号的快速捕获得卫星定位及通信系统研制过程中遇到的一个主要课题，它的实现，不仅可以提高系统的多址能力，而且也是系统实现的必备条件，本文阐明了多重直扩信号的来源以及可被分离的理论依据，给出了多重直扩信号快速捕获的硬件实现方案及部分实验结果，得出了一些重要结论。     

GPS/速率陀螺组合Kalman滤波姿态确定算法研究

建立了GPS／速率陀螺组合姿态估计系统的模型，研究比较了三种典型的Kalman滤波姿态确定算法：状态扩充法、量测量求差法和时变噪声估计跟踪自适应滤波算法。给出了某航天器采用GPS／速率陀螺组合姿态确定的仿真计算结果，并对结果进行了分析。结果表明，与传统Kalman滤波算法比较，时变噪声跟踪自适应滤波算法和量测量求差滤波算法能较好地消除GPS测量中相关时变噪声的影响，提高姿态确定的精度；而且时变噪声跟踪自适应滤波算法能很好地消除由于噪声统计性能的不确定性对Kalman滤波的影响，提高姿态确定系统的性能。