Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

干式变压器数据采集与控制系统的设计

介绍了一种基于V/F变换的高精度干式变压器数据采集与控制系统 ,采用LM2 3 1A/F变换芯片和89C5 2单片机实现工业现场测量对象的A/D转换。V/F变换器具有高精度 ,高线形度 ,且外围电路简单的特点。采用单片机直接与V/F变换器连接进行A/D转换 ,不需要额外的硬件电路 ,充分利用硬件资源 ,精心设计软件 ,系统分辨率可达 12位 ,转换精度可达 0 .0 2 %。当传感器与上位机距离较远时 ,可以采用RS -4 85接口或无线数据发送 /接收模块实现远距离的数据通信     

基于MSP430汽车防抱死制动控制器的设计

介绍了一种汽车防抱死制动系统控制器的设计。控制器以MSP430F149单片机为核心,根据防抱死制动系统的工作原理,利用轮速传感器,对轮速进行滤波、放大、整形等实现车轮速度的采集。采用基于车轮滑移率的防抱控制理论,根据车速、轮速来计算车轮滑移率。在硬件设计方面,根据系统选择了MSP430F149单片机,设计出信号输入回路、输出驱动回路、电源部分,给出了系统结构原理图。     

数字化机载环控地面检测系统的研究

通过采用两片PIC18F448及其外围器件实现了机载环控地面检测系统的数字化设计。通过I^2C总线实现两片单片机之间的数据传输与协调，并利用其CAN接口模块实现多套检测系统的网络化和远程控制操作。     

Microstructure,porosity and mechanical properties of selective laser melted AlSi10Mg

Finite element modeling (FEM), microscopy, X-ray computed tomography (CT) and mechanical property tests were used to study the microstructure, porosity and mechanical properties of an AlSi10Mg alloy produced by selective laser melting (SLM). The simulation of the melt pool and thermal history under different energy densities produced an optimized result with an energy density of 44.5 J·mm⁻³. The high cooling rate during the SLM process significantly refined the previous α-Al dendrites. The growth direction of the network-like Al-Si eutectic structure at different orientations confirmed the anisotropic nature of the microstructure. Furthermore, the microhardness, tensile testing and fracture analysis results proved that there were no obvious distinctions in the strength between the transverse and longitudinal directions, and that the ductility was anisotropic, possibly due to the shape and distribution of the pores. The pores measured by X-ray CT at different energy densities confirmed that the sphericity of the pores was inversely related to pores volumes. With optimized processing conditions, the porosity of the selective laser melted sample decreased leading to the improved fabricated fuel system component via SLM.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

一种2812内部FLASH程序远程更新的新方法

仿真器连接DSP进行程序升级给软件维护带来巨大麻烦.利用TMS320F2812芯片的内部丰富资源和支持在线编程的特点,介绍一种应用软件远程更新方法.包括一个通用的BOOT程序和两种生成可烧写文件的方法,满足了TMS320F2812产品的应用开发以及更新维护等需求.方法已应用于多个产品研制中,实验结果表明方法操作方便、加载结果稳定可靠.     

10cm氙离子推力器变推力特性研究

非重力阻尼的连续、快速、高精度补偿是实现重力梯度测量卫星精细重力场测量的关键技术之一,直接影响到整星工程任务的成败。针对重力梯度测量卫星在轨飞行期间对电推进系统宽范围连续变推力能力的应用需求,分析了10cm氙离子推力器推力调节响应特性。在此基础上,通过对阳极电流、励磁电流和阳极流率等推力高敏感响应参量的组合调节,开展了推力调节试验研究,验证了10cm氙离子推力器宽范围连续变推力调节能力,获得了1～20mN范围内的推力调节性能及其变化规律。试验结果表明：在采用地面供电、供气设备条件下,10cm氙离子推力器能够在100～597W的功率范围内实现0.98～20.29mN的推力宽范围调节,比冲175～3500s,推力分辨率优于50μN。研究为建立10cm氙离子电推进系统的推力控制数学模型及调节控制算法奠定基础。     

基于SOC的ACAS无线电高度信号激励测试的设计

本文介绍了一种以SOC为核心芯片用于机载防撞系统(ACAS)中符合ARINC552A标准无线电高度信号激励测试的软硬件设计方法.采用C8051F020型SOC芯片及OPA552等芯片搭建仿真电路,利用PDIUSBD12接口芯片建立与工控机的通讯,依据ARINC552A标准,用C51编写仿真控制程序,将仿真的ACAS无线...     

Zn含量对Mg-10Gd-4.8Y-0.6Zr合金组织和力学性能的影响

采用显微硬度和力学性能测试及金相显微镜、扫描电镜、透射电镜、X射线衍射等分析手段,研究了Zn含量对Mg-10Gd-4.8Y-0.6Zr合金挤压以及时效处理后合金组织和力学性能的影响。结果表明,在Mg-10Gd-4.8Y-0.6Zr合金中添加Zn元素,有利于细化合金晶粒,提高挤压态的强度。未添加Zn的合金T5态晶粒尺寸约为25μm,添加1%(质量分数,下同)Zn后,晶粒尺寸约为15μm,Zn含量为3%时,晶粒尺寸约为10μm。当Zn含量为1%时,合金挤压态和时效态的抗拉强度分别为337MPa,397MPa,屈服强度分别为128MPa,148MPa,伸长率分别为10.0%,5.0%,具有较好的综合性能。