低轨卫星面阵凝视成像技术研究

文章介绍了面阵凝视成像的工作原理及特点，阐述了低轨卫星对地观测凝视成像面临的像移问题及其解决措施，对像移补偿装置与二维指向机构的结合做了初步探讨。     

热防护系统高温纤维隔热毡传热及有效热导率分析

针对重复使用运载器热防护系统纤维隔热毡内部导热和辐射的耦合换热问题进行了分析,应用有限差分法建立了纤维隔热毡的数值分析模型.通过数值求解传热方程,计算了稳态的有效热导率.计算结果表明辐射和气体传导是纤维隔热毡内的主要传热方式,辐射作用随压力和试样密度的增加而降低,在试样温度高的一侧辐射是主要的传热方式,而在温度低的一侧气体传导为主要的传热方式;试样的有效热导率随纤维的平均直径、压力和温差的增加而增加,随试样密度的增加而降低.本文的计算结果与文献中的实验结果吻合较好,可以为纤维隔热毡及热防护系统的优化设计提供理论参考.     

钢筋砼条基及独立柱基有效高度的实用计算公式

为了便于广大工程实践人员对基础有效高度的确定，根据规范GB50010－2002及GB50007－2002推导求解出基础有效高度的实用计算公式及计算表格。     

柱状金属微粒-电介质复合材料的等效介电常数

基于介质圆柱电磁散射理论和等效介质理论，导出了金属柱微粒-电介质复合材料的等效相对介电常数的表达式。数值结果表明：入射波频率低于某一频率或金属柱掺料的体积分数增大到一定数值时，复合材料的等效相对介电常数实部会变为负数。     

基于PIV的凝胶模拟液撞击雾化速度场实验研究

为了更好研究凝胶推进剂的雾化,采用时间分辨粒子图像测速(TR-PIV),研究了不同撞击角度(45°,60°,75°,90°和120°)和射流压差(0.4MPa~0.8MPa)对凝胶推进剂雾化速度的影响。实验结果表明:雾化液滴速度对于撞击轴线呈单峰对称分布,距离撞击点越远,雾化液滴速度越小且分布越均匀;增大撞击角和增大射流压差都可提高凝胶推进剂有效撞击速度,即增加撞击后液体动能转换液体破碎所需的能量,雾化质量提高;当有效撞击速度大于27.9m/s时,实验室配置的凝胶推进剂可充分雾化。     

基于试验设计-遗传算法的船用柴油机冷却系统多目标优化

为了获取某型船用柴油机冷却系统的最佳运行参数,在柴油机可靠运行的前提下,尽量提升动力性和经济性。建立了柴油机工作过程-燃烧室-冷却系统耦合仿真模型,提出试验设计-遗传算法优化算法,该算法具备节省试验成本和多目标全局寻优的优势,选取柴油机的6个典型推进工况点进行研究,采用该算法对冷却系统运行参数开展多目标优化设计,优化设计以海、淡水泵转速为变量因子,以提升动力性参数和经济性参数为目标,以涡前排温、淡水出机温度和峰值缸压为约束条件,优化后,在低负荷点,淡、海水泵节省功耗79.4%、71.73%,扭矩提升7.2%,有效功率提升7.6%,热效率提升8%,耗油率降低6.73%,摩擦功降低9.71%,峰值缸压降低5%。研究结果表明：耦合仿真模型与实机更加贴近;试验设计-遗传算法在解决强耦合、非线性系统的多目标优化问题具备成本低、效率高、精度高的优点。     

后向散射辐射探测大气臭氧总量反演方法的改进

以SBDART模式作为辐射传输计算模式,在各种大气气溶胶存在的情况下利用现有的大气后向散射反演大气臭氧总量的Version7方法,模拟计算得到各种气溶胶存在时的大气臭氧总量,并分析了反演结果误差产生的原因.进一步提出根据斜气柱臭氧总量sΩ0,选择不同连续波长区间测量得到的后向散射强度来对臭氧总量的初估值Ω0进行修正的方法.将得到的结果与Version7的进行比较,证明了新方法的有效性.      

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

Method for the prediction of the effective dose equivalent to the crew of the International Space Station

This paper describes a methodology for assessing the pre-mission exposure of space crew aboard the International Space Station (ISS) in terms of an effective dose equivalent. In this approach, the PHITS Monte Carlo code was used to assess the particle transport of galactic cosmic radiation (GCR) and trapped radiation for solar maximum and minimum conditions through an aluminum shield thickness. From these predicted spectra, and using fluence-to-dose conversion factors, a scaling ratio of the effective dose equivalent rate to the ICRU ambient dose equivalent rate at a 10 mm depth was determined. Only contributions from secondary neutrons, protons, and alpha particles were considered in this analysis.     

一种易于制造、较大视场离轴三反光学系统设计

介绍了离轴三反光学系统初始结构的设计方法,并用该方法进行离轴三反光学系统设计。用ZEMAX软件设计了一个焦距为1 000mm,F数为10,垂直轨道方向视场为±4.0°,沿轨道方向为6.0°和6.5°的光学系统。结果表明,该光学系统在空间频率71线对/mm处,调制传递函数均大于0.4,且三镜为球面,具有易于制造装调等优点。