Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

40Gb/s系统技术解决方案探讨

40Gh／8系统的应用面临光信号的色散、衰减、交换、编码等方面技术的挑战。利用固定补偿模块或源色散补偿技术可以实现光的精确色散及补偿。赖曼式放大器对40Gh／s系统的光传输提供了有力的技术支持，利用赖曼放大器以及全光交换机或光电光交换机则可以实现光信号的有效放大和高性能交换，而带外FEC技术和相应的编码技术可以进一步提高系统的容错能力及传输速率。     

二维通道内湍流边界层分离的实验研究

用激光多普勒技术测量了二维扩压器中不可压湍流边界层分离流动，得到了时均速度和雷诺剪应力分布。实验结果分析表明：以Ｃｏｌｅｓ速度律发展的Ｂａｒｄｉｎａ速度分布可以描述瞬时间歇分离点以前和瞬时间歇再附点以后的时均速度分布，但无法描述分离区的边界层速度型。Ｃｒｏｓｓ速度分布可描述分离区的边界层速度分布。Ｃｅｂｅｃｉ＆Ｓｍｉｔｈ涡粘性代数模型难以正确地描述分离边界层的雷诺剪应力。     

星载合成孔径雷达回波多普勒频率的计算

从星载合成孔径雷达（ＳＡＲ）与目标的相对运动关系出发，以ＳＡＲ发射信号的波长、卫星的轨道参数和目标的位置（地心经纬度）为已知条件，导出了计算目标回小以的多普勒频率的解析公式，这对于星载ＳＡＲ系统的性能 初步设计具有重要作用。     

Efficacy of Doppler ultrasound [correction of utrasound] for screening symptoms of decompression sickness during simulated extravehicular activities

Doppler ultrasound is frequently used for monitoring circulating microbubbles during decompression to assess the symptoms of Decompression Sickness (DCS). This analysis was carried out to evaluate its effectiveness for screening symptoms of DCS during simulated extravehicular activities (EVA). The information from various hypobaric chamber studies carried out at the NASA Johnson Space Center, Houston, TX was used in this analysis (n = 516). The circulating microbubbles were detected in the precordial area in 42% (218/516), and symptoms were reported in 16% (81/516) of these exposures. The accuracy of Doppler-detectable bubbles (Spencer grades) on all symptoms of DCS was examined by calculating measures of sensitivity and specificity. The efficacy of Doppler as a screening device was examined by calculating their positive predictive value (PPV) and negative predictive value (NPV). The results of these analyses indicated that the sensitivity of Doppler decreased, and the PPV increased with higher Spencer grades. However, the likelihood of detecting true negative cases (NPV) was consistently higher with all bubble grades. Due to the high false-positive rate and low prior probabilities of the risk of DCS, Doppler was found to be more useful to identify those who did not develop DCS, than to detect positive cases of DCS in the simulated EVA exposures.     

导弹随机飞行仿真的建模研究

本文研究了导弹的六自由度（６ＤＯＦ）空间运动制导系统的基本特性，建立了导弹随机飞行模块化数字仿真结构。在随机干扰作用下，应用协方差分析描述函数技术（ＣＡＤＥＴ），分析弹着点的散布，获得了较满意的结果。文中主要讲述了方波控制的导弹的有关问题，但所给方法对其它类型的导弹也是同样适用的。     

用于导弹系统性能统计分析的统计线性化伴随法

本文在研究ＳＬＡＭ方法基础上，进行了理论推导和计算方法方面的改进，并将此方法应用于导弹系统性能的统计分析，计算机仿真结果表明该方法与采用ＣＡＤＥＴ方法的结果完全一致。     

某工程频分制遥测系统设计与研制

介绍了某工程战斗弹上所用的频分制遥测系统 ,对该系统的遥测参数进行了分析 ,确定了六个主要参数可以对导弹的工作状态进行判断。并对遥测系统进行了分析 ,确定了系统的主要技术指标。最后对研制中所出现的几个关键技术问题进行了分析和讨论。靶试结果表明 ,该系统设计合理 ,为战斗弹的靶试提供了重要的参数。     

关于多普勒频率转换成距离变化率公式的讨论

利用多普勒效应原理对雷达测速的转换公式进行了讨论，指出在飞行器高精度轨道测量中，现行的测速转换公式存在较大的误差；给出了新的包含二阶项的测速转换公式，并导出了一个简便实用的直接在测量数据上进行该项误差修正的方法，同时进行了误差特性分析。实际计算表明：轨道测量数据进行二次修正后，匹配程度明显优于修正前。     

加入增益介质的F-P干涉仪和衍射光栅光谱仪的光谱特性对比

对加入增益介质的F—P干涉仪的光谱特性与衍射光栅光谱仪的光谱特性作了定量对比。结果表明，加入增益介质的F—P干涉仪的光谱特性要明显优于衍射光栅光谱仪的光谱特性。这为光谱精细结构分析提供了更为理想的选择。