Effect of bristle pack position on the rotordynamic characteristics of brush-labyrinth seals at various operating conditions

Over the last few decades, the research on the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals is not sufficient. To this end, two kinds of brush-labyrinth seals for the bristle pack element installed upstream of the labyrinth teeth named BSU and installed downstream of the labyrinth teeth called BSD were used to investigate the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals. Using the numerical model combining the porous medium model and the whirling rotor method, the rotordynamic characteristics of the BSU and BSD at various operating conditions including four kinds of pressure ratios, five kinds of inlet preswirl speeds and four kinds of rotor spinning speeds were conducted. The obtained results show that the effects of operating conditions on rotordynamic coefficients for the different seal configurations are different. The direct stiffness, cross-coupled stiffness and direct damping of the BSU are lower than those of the BSD. The rotordynamic coefficients of the BSU are more insensitive to the operating conditions variation. From the perspective of the seal stability, the BSU is a better brush-labyrinth seal configuration at high pressure ratio, high positive preswirl or high rotor spinning speed conditions. While in the case of low pressure ratio, low positive preswirl or low rotor spinning speed conditions, the BSD is a better choice.     

利用热源温度场迭加法诊断持续点热源的强度及位置

可重复使用运载器的防热瓦故障会使航天器的局部结构产牛热源，并在结构中形成温度场。应用热源温度场迭加法的解函数，解得结构温度历程，然后据此温度的变化率趋势判断出热源位置，在此基础上依据多点测最值构造出辨识参数用于热强度识别，通过对一薄壁结构模型算例的计算仿真，证明了本文所提方法的有效性。论文工作为进一步开展热源诊断技术研究，提供了可资工程实践应用的数值算法体系以及有益的数值计算结论。     

钣金制件表面的相贯线求作方法

本文提出钣金制件表面相贯线求作的新方法。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

磁粉探伤机周向电流单片微机控制器的研制

本文介绍一种新型磁粉探伤机周向电流的单片计算机控制器，文中详细介绍控制器的控制原理，结构，控制程序。该控制器对周向电流采用闭环控制，直接设定磁化电流，可保证电流稳定，电流设定值和实际电流值相差小于１０％，控制器还具有了出错检测，自动退磁功能。     

加扰流环双组元LAE的流场数值仿真

采用交错网格系统SIMPLE算法和二维两相流场燃烧模型，对有不同形状(矩形、圆弧三角形及其混合结构)和位置扰流环的某双组元液体远地点发动机(LAE)流场进行了数值仿真计算。结果表明，扰流环对提高燃烧效率作用明显。环的位置应适中(不能过于靠近头部和喷管出口处)，其高度越大，燃烧效率越高。另外，矩形环的压力损失大于三角形环。     

承力操纵装置性能试验台系统方案设计

介绍了一个飞机承力操纵装置性能试验台的实现机理、采用的方案,有助于增加读者对液压系统、液压性能试验台及液压伺服控制系统的了解。     

卫星故障诊断的最优奇偶向量法

 提供一种卫星故障诊断方法以提高 GPS导航的完整性。该方法利用最优奇偶向量来检测和诊断卫星故障以提高卫星故障诊断的准确性。仿真结果显示,在故障幅值较小的情况下最优奇偶向量方法相比广义似然比方法可以提高故障的正确检测率和正确诊断率。该方法还可以缩短检测斜坡型故障的时间,从而提高了系统的可靠性。     

位置度测量最小二乘评定

就测量中无中心基准和无角向要求的位置评定问题，运用最小二乘法则对测量数据进行了误差分离优化评定，使此类位置度评定的稳定性和一致性得到改善。     

Fe—10Ni—14Co钢标准状态的组织研究

用透射电子显微镜重点研究了Ｆｅ－１０Ｎｉ－１４Ｃｏ钢的标准处理状态（８３０℃风冷＋—７３℃＋５１０℃Ｓｈ）的微观组织结构。５１０℃回火不同时间，由于Ｍ２Ｃ的析出状态发生变化，钢也由峰时效（５１０℃／１０ｍｉｎ）→过时效（５１０℃／５ｈ）→明显过时效转变。５１０℃５ｈ合会开始发生逆转变。