表面完整性研究用预测模型的研究进展

综述了国内外表面完整性研究时采用的预测模型的种类、应用等研究现状.详细阐述了使用分析模型和数值模型对材料切除过程中零件表面的显微结构、残余应力等表面完整性参数的预测,并指出了影响预测模型准确性的一些因素.     

Boundary discontinuous Fourier analysis of thick beams with clamped and simply supported edges via CUF

This paper presents an analytical solution for static analysis of thick rectangular beams with different boundary conditions.Carrera's Unified Formulation (CUF) is used in order to consider shear deformation theories of arbitrary order.The novelty of the present work is that a boundary discontinuous Fourier approach is used to consider clamped boundary conditions in the analytical solution,unlike Navier-type solutions which are restricted to simply supported beams.Governing equations are obtained by employing the principle of virtual work.The numerical accuracy of results is ascertained by studying the convergence of the solution and comparing the results to those of a 3D finite element solution.Beams subjected to bending due to a uniform pressure load and subjected to torsion due to opposite linear forces are considered.Overall,accurate results close to those of 3D finite element solutions are obtained,which can be used to validate finite element results or other approximate methods.     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

空天飞行器返回滑翔段在线制导方法

针对空天往返飞行器的返回滑翔段在线制导问题,设计了一种新的滑翔段飞行剖面,实现了滑翔段终端交班高度、位置和倾角约束的自动满足,减少了在线制导算法中需处理的约束数量.推导了滑翔段运动状态、过程约束和性能指标的解析表达式,获得了剩余航程和终端速度间的函数关系.在此基础上,提出了一种双层在线制导方法:内层解析重构飞行剖面,同...     

弹道导弹自由段解算的等高约束解析解

在状态空间摄动法的基础上，提出了求解终端为高度约束的弹道导弹自由段轨迹的方法，导出考虑J2项摄动的运动参数等高偏差解析解，并提出利用已有的等地心距偏差公式近似的思路。和其它解析方法相比，所提方法计算精度高，无须迭代。算例证明：解析方法的计算精度在50米以内，可以满足诸元和制导计算的要求。     

诊断键合图在液体火箭发动机故障诊断中的应用

研究了通过诊断键合图模型建立液体火箭发动机解析冗余关系的故障诊断方法。通过在液体火箭发动机键合图模型中加入观测信号和虚拟传感器的方法，建立其诊断键合图模型，并利用此模型构建了系统的解析冗余关系。提出了根据诊断键合图因果路径并利用解析冗余关系残差趋势分析建立具有残差变化方向故障特征矩阵的方法，使故障特征值能更好地反映故障特征。最后利用仿真数据对诊断结果进行验证和分析，表明该方法建模简单、诊断速度快、准确性高。     

Analytical solutions for Earth discontinuous coverage of satellite constellation with repeating ground tracks

This paper presents an analytical model for calculating the Earth discontinuous coverage of satellite constellation with repeating ground tracks by integrating and extending the application of coverage region and route theory. Specifically, the visibility condition for a ground point is represented as a coverage region in the two-dimension map of visibility properties, and the trajectories of satellites with circular orbits and repeating ground tracks are converted to several inclined lines in t...     

最佳传力特性的偏置曲柄滑块机构解析法设计

本文根据偏置曲柄滑块机构的运动特性和传力特性所建立的函数关系，运用极值理论推导出给定条件下传力特性最佳的计算公式，大大方便了设计应用，值得推广。     

Training effectiveness evaluation of helicopter emergency relief based on virtual simulation

Helicopters are playing an increasingly important part in emergency relief, such as earthquake rescue, firefighting and medical transport. With the development of virtual simulation technology, virtual simulation-based training is widely used in the training of the helicopter crew especially for the dangerous and costly missions mentioned above. A complete training effectiveness evaluation method is proposed to evaluate the trainees’ training effect based on virtual simulation in this paper. A key to this method is regarding the complicated process as a discrete event-activity flow system and establishing the evaluation indicator system. Then expert group and Analytical Network Process (ANP) are applied to determine the weight of indicators. When the training data are processed, there is a novel attempt to apply Fuzzy Comprehensive Evaluation (FCE) model to calculate the two categories of indicators. Eventually, an experiment and the analysis were carried out to validate the evaluation method.     

连续激光加热推力器性能的简化解析计算模型

针对具有开放式吸收室的连续激光加热推力器,通过合理简化和分析,建立了一维流推力