A survey of safety separation management and collision avoidance approaches of civil UAS operating in integration national airspace system

Recent years have witnessed a booming of the industry of civil Unmanned Aircraft System (UAS). As an emerging industry, the UAS industry has been attracting great attention from governments of all countries and the aviation industry. UAS are highly digitalized, informationized, and intelligent; therefore, their integration into the national airspace system has become an important trend in the development of civil aviation. However, the complexity of UAS operation poses great challenges to the traditional aviation regulatory system and technical means. How to prevent collisions between UASs and between UAS and manned aircraft to achieve safe and efficient operation in the integrated operating airspace has become a common challenge for industry and academia around the world. In recent years, the international community has carried out a great amount of work and experiments in the air traffic management of UAS and some of the key technologies. This paper attempts to make a review of the UAS separation management and key technologies in collision avoidance in the integrated airspace, mainly focusing on the current situation of UAS Traffic Management (UTM), safety separation standards, detection system, collision risk prediction, collision avoidance, safety risk assessment, etc., as well as an analysis of the bottlenecks that the current researches encountered and their development trends, so as to provide some insights and references for further research in this regard. Finally, this paper makes a further summary of some of the research highlights and challenges.     

An innovative approach for integrated airline network and aircraft family optimization

The determination of optimal aerial transport networks and their associated flight frequencies is crucial for the strategic planning of airlines, as well as for carrying out market research, to establish target markets, and for aircraft and crew rostering. In addition, optimum airplane types for the selected networks are crucial to improve revenue and to provide reduced operating costs. The present study proposes an innovative approach to determine the optimal aerial transport network simultaneously with the determination of the optimum fleet for that network, composed of three types of airplanes (network and vehicle integrated design). The network profit is maximized. The passenger’s demands between the airports are determined via a gravitational model. An embedded linear programming solution is responsible for obtaining potential optimal network configurations. The optimum fleet combination is determined from a database of candidate aircraft designs via genetic algorithm. A truly realistic airplane representation is made possible thanks to accurate surrogate models for engine and aerodynamics is adopted. An accurate engine deck encompassing a compression map and an innovative engine weight calculation besides an aerodynamical artificial neural network module enable a high degree of accuracy for the mission analysis. The proposed methodology is applied to obtain the optimum network comprised of twenty main Brazilian airports and corresponding fleet.     

一万氧压机轴振动控制分析与实践

本文介绍了一种非常规的高速轴振动抑制方法，主要是用振源分析技术，通过确诊设备故障原因来分析影响轴振动的主要因素，调节机器的系统刚度，再通过理论计算修订安装参数，制定设备故障处理对策，在涟源钢铁集团有限公司一万氧压机组上的实践取得了相当满意的效果，很有推广价值。     

变轨发动机不等量截尾试验可靠度评估

对于可靠度要求极高和任务时间以小时计的变轨发动机来说，目前广泛采用以铌合金为材料并喷涂以抗高温氧化涂层方案的推力室，这一类发动机在方案试验阶段结束后的研制试验中往往只出现截尾试验的结果。给出了不等量截尾试验结果的可靠度评估方案。     

低空突防任务下综合飞行/推进系统的建模与仿真

建立了综合飞行／推进系统的数学模型，介绍了飞机全维非线性数学模型和涡轮风扇发动机非线性部件级数学模型的建模及综合方法。对飞机执行地形中随任务时，飞行员调节飞行速度的方法与基于总能量的调节飞行速度的方法进行了比较。结果表明，基于总能量的方法比飞行员直接控制飞行速度能够减小发动机的燃油消耗，降低发动机的磨损，进而可以增加飞机的航程，延长发动机的使用寿命。     

加速器切线照相技术研究

根据工作实践研究了固体发动机切线照相无损检测中黑度分布、散射线防治、象质计使用、检测概率计算、脱粘临界值确定等技术问题.     

组合发动机系统控制方程（2）

一组能够描述各种组合发动机系统工作的通用方程组已用于弹道计算的通用程序包ＴＣ系列，使得通用程序包ＴＣ对各种类型的火箭和空间飞行器的弹车员道仿真方便又准确。本文是第２部分。     

空天飞机的计算流体力学分析

本文分析了空天飞机空气动力学的特点和计算流体力学在发展空天飞机中的作用,讨论了发展空天飞机对计算流体力学的要求。强调了计算流体力学、地面试验和飞行试验应该相互结合成一个整体。在这基础上,探讨了利用地面试验对计算程序进行“确认”、“校准”和“鉴定”以及鉴定计算程序对地面试验的要求。本文还从计算方法、外流、进气道流动、喷管流动、燃烧室流动等方面,综述了空天飞机计算流体力学分析的最近进展和尚待解决的问题。最后对发展我国空天飞机计算流体力学提出了建议。     

空袭目标威胁评估模型研究

以航路捷径、目标类型、机动特性、到达发射区近界的剩余时间，以及电子干扰为主要影响因素，结合多通道防空武器系统的特点，建立了基于层次分析法和模糊综合决策法的空袭目标威胁评估模型。用层次分析法确定各因素权重，以分段函数的形式给出权重系数。针对一给定的中程防空武器系统，用模糊统计计算各影响因素的隶属函数，并给出了模型的计算流程。仿真结果表明，所设计的模型能较准确地评估来袭目标的危险性，且具有较高的灵敏度。     

毫米波导引头的技术特点

论述了空空导弹毫米波导引头的主要技术特点及其在工程应用中存在的若干问题。着重讨论了空空导弹毫米波导引头较红外和微波导引头在分辨力、反隐身和抗干扰方面的技术优势，并就毫米波导引头在探测与跟踪、大功率器件研制和毫米波器件的精密加工等关键技术问题进行了分析。