Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

涡旋真空泵的密封设计

涡旋真空泵在工作过程中动、静涡盘之间间隙存在泄漏损失,它是影响涡旋真空泵工作性能的重要因素;总结了涡旋真空泵的工作原理;介绍了涡旋真空泵的密封设计与选择、间隙的确定。从材料和结构两方面阐述了密封的几种结构形式,说明了各自的工作原理,及需要注意的问题,阐明这些问题是影响泵性能指标的重要因素。     

Dose equivalent, absorbed dose and charge spectrum investigation in low Earth orbit.

Particle intensity, dose equivalent and absorbed dose have been measured on board the space shuttle Endeavour during STS-108 in December 2001 by Dublin Institute for Advanced Studies (DIAS). The dose estimates are based on very accurate measurements of recoils produced in CR-39 by cosmic ray primary and secondary protons and heavier nuclei and by secondary neutrons. The corresponding LET spectra were used to determine dose equivalent and absorbed dose values. Estimates of the total flux of Z > or = 2 nuclei have been undertaken and a preliminary charge spectrum was measured. Some comparisons are made with preliminary data obtained on STS-105 (ISS Expedition) and other missions using CR-39 detectors.     

通用仪器接口总线标准及软件技术的发展

叙述了通用仪器接口总线标准和软件技术的现状和未来。介绍了ＧＰＩＢ、ＶＸＩ总线，程控仪器校准命令和虚拟仪器，给出了ＧＰＩＢ标准关系图，ＧＰＩＢ软件结构以及虚拟仪器框图。     

MTS协调加载系统建立试验载荷谱软件的设计和应用

针对MTS协调加载系统在建立试验载荷谱中存在的功能缺陷，采用多线程和动态建立索引的方法，开发了MTS协调加载系统快速、准确地建立试验载荷谱软件。介绍了软件的设计思路以及建立载荷数据模块及配置载荷情况模块及加载顺序模块等功能模块和接口的设计。解决了该系统在实际应用中存在的局限性问题，完善了MTS系统功能。最后通过试验验证了软件的实用性。     

数据采集系统的总体评价

从性能指标出发，综述了数据采集系统总结评价技术的发展状况。并提出了对数据采集系统性能指标的两类分类方法 。     

八丝热线探针制作及其应用

介绍了八丝热线探针的制作工艺,有效地消除了各热丝探头之间的电信号干扰和动力学干扰。实验中使用该探针检测到了湍流边界层内的大尺度旋涡,并测量了它们的强度和尺度。与此同时还获得了速度、湍流强度和功率谱等流场参数,结果与现有典型数据一致。说明本文所述的多丝热线探针具有很强的实用性。     

航天火工装置推力测量的干扰分析

航天火工装置种类很多,性能各异。文章仅对广泛使用的弹射器和解锁器类火工装置的推力测量系统进行论述,分析测量过程中的干扰环节,说明不同干扰类型对测量结果的影响。并提出测试改进建议。     

多相序列的相关性研究

地址码在CDMA通信系统中占有重要地位,它决定着系统的容量、抗干扰性等重要指标。本文在NaokiSuehiro提出的多相序列构造理论的基础上,对其相关性进行分析、研究,并与当前性能较佳的二元序列进行对比。结果表明,多相序列具有优异的性能,适合用作CDMA系统中的地址码。     

基于皮卫星的分布式干扰系统及其关键技术

在对皮卫星的特点总结的基础上,提出了一种基于皮卫星的天基干扰系统,给出了干扰系统的原理性方案,对其中的关键技术进行了分析。