Properties and performance of extended target motion analysis

The problem of target motion analysis (TMA) has been the subject of an important literature. However, present methods use data estimated by a short time analysis (azimuths, Dopplers, etc.). For far sources, the nonstationarities of the array processing outputs, induced by the sources motion, may be simply modeled. This model leads one to consider directly a spatio-temporal TMA. Then new (spatio-temporal) data can be estimated. These estimates correspond to a long time analysis. Further, note that they are estimated independently of the (classical) bearings. In this general framework, the concept of source trajectory replaces the classical instantaneous bearings. Corresponding TMA algorithms are then studied. Then the study of statistical performance is carefully studied     

基于GSM网络的干式变压器温控数据传输系统

本文介绍了基于GSM远程无线干式变压器温度数据传输系统的结构、原理与软硬件设计。     

用FVM法计算固体火箭羽流的红外特性

建立了有限体积法(FVM)的理论模型模拟固体火箭羽流的红外特性,研究了燃气组分H2O,CO2,CO,HCL,OH,NO的吸收和发射,以及AL2O3粒子云的吸收、发射和散射,还研究了两相流场中气相和粒子云温度不均匀时对辐射传输方程的修正。计算一单喷管固体火箭的二维轴对称羽流在光谱2~5μm的红外特性,给出羽流辐射的空间分布和光谱分布并与文献计算的结果对比。研究表明:有限体积法能较好地模拟固体火箭羽流的红外特性;粒子辐射占固体火箭羽流红外辐射的主要部分;在光谱2~4μm粒子辐射使羽流辐射增强,而在光谱4~5μm粒子辐射使羽流辐射减弱。     

钛合金板材激光弯曲成形的研究

 对常温下钛合金板材进行了激光弯曲成形研究。分析了激光功率、扫描速度、光斑大小对板材弯曲变形的影响,获得理想工艺参数范围为:功率1 .0～1 .2 k W、扫描速度2～3 m/min、光斑直径6～7mm。同时分析了板材厚度、宽度及扫描次数对材料弯曲变形的影响,为钛合金板材弯曲成形提供了一种新途径。     

Discrete-time observability and estimability analysis for bearings-only target motion analysis

Observability in the context of bearings-only tracking (BOT) is still the subject of important literature. Different from previous approaches, where continuous-time analysis was considered, our approach relies on discrete-time analysis. It is then shown that this allows us to use directly and efficiently the simple formalisms of linear algebra. Using the direct approach, observability analysis is essentially reduced to basic considerations about subspace dimensions. Even if this approach is conceptually quite direct, it becomes more and more complex as the source-encounter scenario complexity increases. For complex scenarios, the dual approach may present some advantages essentially due to the direct use of multilinear algebra. New results about BOT observability for maneuvering sources are thus obtained. Observability analysis is then extended to unknown instants of source velocity changes. Even if observability analysis provides thorough insights about the algebraic structure of the BOT problem, the optimization of the observer maneuvers is essentially a control problem. Basic algebraic considerations prove that a relevant cost functional for this control problem is the determinant of the Fisher information matrix (FIM). So, a large part of this work is devoted to the analysis of this cost functional. Using multilinear algebra, general approximations of this functional are given. In order to involve only directly estimable parameters, the source bearing-rates are examined. Using these approximations, a general framework for optimizing the observer trajectory is derived which allow us to approximate the optimal sequence of controls. It is worth stressing that our approach does not require the knowledge of the source trajectory parameters and is still valid for a maneuvering source.     

雨流计数法及其在程序中的具体实现

根据雨流计数法的规则和在实际中应用的体会，介绍了雨流计数法在程序中实现的具体方法。它适合用各种语言编写，在计取循环数时采用的“四点法”使程序的实现比用其他方法更加准确可靠，简单明了。     

Present-Day Sea Level Change: Observations and Causes

We investigate climate-related processes causing variations of the global mean sea level on interannual to decadal time scale. We focus on thermal expansion of the oceans and continental water mass balance. We show that during the 1990s where global mean sea level change has been measured by Topex/Poseidon satellite altimetry, thermal expansion is the dominant contribution to the observed 2.5 mm/yr sea level rise. For the past decades, exchange of water between continental reservoirs and oceans had a small, but not totally negligible contribution (about 0.2 mm/yr) to sea level rise. For the last four decades, thermal contribution is estimated to about 0.5 mm/yr, with a possible accelerated rate of thermosteric rise during the 1990s. Topex/Poseidon shows an increase in mean sea level of 2.5 mm/yr over the last decade, a value about two times larger than reported by historical tide gauges. This would suggest that there has been significant acceleration of sea level rise in the recent past, possibly related to ocean warming. This revised version was published online in August 2006 with corrections to the Cover Date.     

现代民用飞机的发动机火警探测系统设计分析

发动机火警探测系统是现代飞机一个很重要的组成部分，它能否准确及时的探测到发动机火警，不仅影响到飞机的正常营运，还直接危及到飞行安全。本文分析了现代飞机的发动机火警探测系统的总体设计，探测器原理和处理探测器信号的判断逻辑和系统设计特点。     

利用改正数信息的北斗三号实时精密单点定位及性能分析

北斗三号全球卫星导航系统已正式建成并开通服务。为了利用实时改正数信息系统地揭示北斗三号精密单点定位性能，并为用户提供理论依据和应用参考，首先解算了卫星实时精密轨道、钟差及其改正数，分析了其精度。然后基于实时改正数信息，利用监测站广播星历和观测数据，分别进行了双频静态、双频仿动态、单频静态和单频仿动态仿实时精密单点定位，以评估其性能。结果表明：北斗三号MEO卫星实时轨道和钟差精度均值分别约为12cm和0.2ns，满足实时精密单点定位需求。静态实时精密单点定位精度优于动态，双频优于单频，均可达到分米级。对于定位收敛时间，双频静态最短，约为40min；双频动态和单频静态均约为85min；单频动态最长，约为120min。     

A320系列机型绿点速度特性分析

绿点速度是空客系列机型特有的光洁构型、一发失效条件下的最佳操纵速度。为了研究绿点速度的设计依据,利用空客PEP性能软件计算A320系列机型光洁构型、一发失效条件下、不同校正表速所对应的爬升角、等待燃油流量和飘降下滑角,分析了绿点速度状态、最大升阻比状态下的爬升、等待、飘降性能与最佳爬升/等待/飘降性能相互之间的关系。结果表明:绿点速度小于最大升阻比速度,随着飞行高度增加逐渐逼近最大升阻比速度;绿点速度下的爬升/等待/飘降性能对应于最大升阻比性能、最佳爬升/等待/飘降性能的均值。