基于客流密度的地铁列车空调夏季送风温度控制模型研究

客流密度是影响地铁列车客室内热舒适性环境的重要因素,传统的地铁列车客室温度控制主要是根据UIC-553标准,以室内外温差作为控制核心.本文通过构建全尺寸地铁列车客室-乘客-空调送风耦合的一体化模型,利用实车试验与数值模拟相结合的方法,对地铁列车客室内的热舒适性展开研究.探讨客流密度对地铁列车客室内热舒适环境的影响规律以及不同客流密度下客室平均温度与空调送风温度之间的关系,得到了不同客流密度下能满足人体热舒适性体验的空调送风温度,提出了一种基于客流密度的地铁列车空调夏季送风温度控制模型.     

林则徐纪念馆肃穆敬仰史海钩沉

一到福州,就想去林则徐纪念馆参观参观. 很小的时候就知道,林则徐是近代中国一位伟大的爱国主义者、杰出的民族英雄.正是因他禁销鸦片所引起的第一次鸦片战争,结束了中国几千年的古代史,开启了中国的近代史.后来通过进一步的学习,更了解到他是近代中国"放眼看世界第一人",他在鸦片战争中的思想和实践,代表当时历史上最进步的趋向,对近代中国社会的发展产生了深远的影响.并且,他当时还在整顿漕务、海防建设、兴修水利以及抗洪赈灾上都做出了重大贡献.也正因如此,国际天文学联合会将北京天文台1996年6月7日发现的小行星(国际永久编号7145)命名为"林则徐星".     

胶州湾环境污染—卫星遥感信息分析

陆地卫星主题绘图仪(TM)图象和我国国土普查卫星全景相机照片解译分析与现场调查表明,胶州湾东岸工业废水污染相当严重,主要污染源集中在海泊河、李村河、娄山河以及沧口区沿海一线,污染水带宽达4～7km,在落潮流携带下扩散至湾口外海。由青岛碱厂排污形成的“白滩”污染区现有面积为0.53km~2。青岛市大气污染严重,源自市区的烟羽宽达14km,顺风飘逸远达30km,势必造成酸雨等灾害。     

Flutter analysis of an airfoil with bounded random parameters in incompressible flow via Gegenbauer polynomial approximation

The effects of parameter uncertainty on the flutter characteristics of a two-dimensional airfoil in an incompressible flow were investigated through Gegenbauer polynomial approximation. The uncertain parameters, such as the linear and cubic pitch stiffness coefficients are modeled as bounded random variables with λ-PDFs (probability density functions). With the aid of Gegenbauer polynomial approximation, the two-dimensional stochastic airfoil system is transformed at first into its equivalent deterministic one. Then the Hopf-bifurcation point is determined through the equivalent deterministic system, and the onset of the flutter, together with the flutter frequency against the probability density distribution parameter and the intensity of the random variable is explored. In addition, the ranges of the peak pitch and plunge responses against the flight speed and the PDFs of the peak pitch response are obtained. Numerical results show how the probability density distribution parameters and the intensities of random parameters affect the flutter onset speed, flutter angular frequency, the upper and lower boundaries of peak responses, and the PDFs of peak responses.     

摩擦塞焊研发与关键问题

如果将搅拌摩擦焊认定为铝合金焊接上的一场革命,摩擦塞焊则是铝合金补焊工艺上一次质的飞跃。文章阐明了摩擦塞焊的工作原理,详细论述该工艺的发展、研发中出现的几个关键问题和解决途径。     

1/spl phi/ 3W grid-connection PV power inverter with partial active power filter

This paper presents a single-phase three-wire (1/spl phi/ 3W) grid-connection photovoltaic (PV) power inverter with a of partial active power filter (PAPF) feature, which can not only deal with PV power but filter current harmonics and improve power factor. Once the processed power exceeds the switch ratings, the inverter can reduce its output reactive power and harmonic power, while still supplying the maximum real power generated by the PV arrays. In the derivation of control laws, a limit circle is defined to confine the output power of the inverter. To determine the power that the inverter can process, the instantaneous reactive power of a 1/spl phi/ 3W system is defined and used to calculate reactive power, which can avoid complex detections of phase angle and magnitude of the fundamental component of a nonlinear load current. Simulation results and experimental measurements have verified the proposed algorithm and the feasibility of the inverter.     

Aperture error mitigation via local-state estimation for frequency-based emitter location

This paper considers the problem of locating a stationary coherent emitter via a single moving platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the estimated emitter location is most sensitive to the receiving aperture velocity uncertainty. The required aperture velocity accuracy is determined through a noninfinitesimal perturbation analysis. A solution to location accuracy enhancement with a minimal hardware addition is attempted. It is shown that this can be achieved by mounting a high-resolution tri-axis microelectromechanical systems (MEMS) accelerometer at the aperture to measure its velocity, which can deviate significantly from that estimated by the on-board navigation system. The Doppler shifts of the GPS signal carrier frequency, whenever it can be acquired through the aperture, are also considered as a way to aid the aperture velocity measurement. A decentralized, federated processing method for the aperture velocity estimate referenced at the aperture, integrating all measurement data, is presented. An upper bound for the error of aperture velocity estimate is derived. The potential for significant accuracy enhancement for emitter location is demonstrated.     

毕棚沟 一路走过

梦是对无限、永远的可能的相信，而现实并不……黑、白棋总是在棋盘上腾转挪移，而黑、白并不……[编者按]     

基于PCI总线的石英晶体元件电参数测试仪

首先介绍PCI总线控制专用芯片S5920的组成,Mailboxs、FIFO、Pass-Thru的基本概念、性能和使用方法。其次介绍测量石英晶体元件参数的阻抗计法和π网络法。对基于PCI总线控制器S5920为核心的π网络法石英晶体元件电参数测试仪的设计和实现作了说明。该方法测量的频率可达2005MHz。利用GPs高精度的授时信号作为频率校准信号校准信号源的精度。