Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

飞轮微振动的组合隔振装置设计及实验研究

针对光学遥感卫星飞轮微振动引起的成像质量下降问题，设计了一种组合隔振装置，并采用仿真分析与实验测试相结合的方法对隔振方案设计的合理性进行验证。首先，将测量的飞轮扰振数据引入光学卫星的有限元模型中，计算出飞轮扰振对光学相机的像素偏移影响；其次，设计了组合隔振方案并基于有限元方法对其隔振效果进行验证；最后，搭建了光学成像微振动实验测试平台，对不同转速下飞轮微振动造成的像素偏移影响进行精确测量。实验结果表明，组合隔振装置对300 Hz以上高频段飞轮扰振有较大衰减作用，最大像素偏移降到0.01个像素以下，隔振效率达到80%以上；通过对比可知，实验测试与仿真计算得到的像素偏移结果在低频段一次谐波响应及模态响应表现出较好一致性，但在高频段二者存在一定偏差。     

涡旋真空泵的密封设计

涡旋真空泵在工作过程中动、静涡盘之间间隙存在泄漏损失,它是影响涡旋真空泵工作性能的重要因素;总结了涡旋真空泵的工作原理;介绍了涡旋真空泵的密封设计与选择、间隙的确定。从材料和结构两方面阐述了密封的几种结构形式,说明了各自的工作原理,及需要注意的问题,阐明这些问题是影响泵性能指标的重要因素。     

Active damping control of vibrational systems

The problem of vibration suppression in large flexible space structure (LFSS) is investigated. Based on the structure property of LFSS, an active damping strategy is proposed to effectively attenuate the critical vibrations of the structure subject to modeling uncertainty and external disturbance. Control algorithms are derived with the aim of suppressing both the vibrating magnitude and vibrating rate to an acceptable level. It is shown that the strategy exhibits robust and adaptive properties and is truly model-independent. The novelty of the proposed approach lies in the fact that it is fairly easy to set up the strategy and the overall computation involved is much less than any other strategies available to date. A two-bay truss is used to verify the validity of the proposed approach     

MTS协调加载系统建立试验载荷谱软件的设计和应用

针对MTS协调加载系统在建立试验载荷谱中存在的功能缺陷，采用多线程和动态建立索引的方法，开发了MTS协调加载系统快速、准确地建立试验载荷谱软件。介绍了软件的设计思路以及建立载荷数据模块及配置载荷情况模块及加载顺序模块等功能模块和接口的设计。解决了该系统在实际应用中存在的局限性问题，完善了MTS系统功能。最后通过试验验证了软件的实用性。     

航天火工装置推力测量的干扰分析

航天火工装置种类很多,性能各异。文章仅对广泛使用的弹射器和解锁器类火工装置的推力测量系统进行论述,分析测量过程中的干扰环节,说明不同干扰类型对测量结果的影响。并提出测试改进建议。     

样条函数在轨道计算中的应用

提出了在已知现速度的情况下，用样条函数计算视加速度的新方法，避免了传统牛顿插值法的不可靠性及由此而产生轨道重构错误的缺点，仿真结果表明用样条函数法重构的轨道精度明显优于牛顿插值法。     

CA6145i型车床噪声检测与降噪处理

通过对新机型CA6145i卧式车床进行噪声攻关试验,得出此型号机床噪声声压级超标,且主轴箱中伴有不规则的杂声。应用频谱分析法找到噪声源,采取相应措施降低或消除噪声,为车床的批量投产奠定基础。     

锌渣的固化处理及浸出毒性试验研究

采用药剂稳定化、水泥固化以及二者结合等方法对锌渣进行了处理研究。结果表明重金属螯合剂的药剂稳定化和水泥固化相结合的方法处理锌渣,其重金属含量可以低于固体废物毒性浸出标准的限值,能有效控制对周围环境的污染。所以,采用药剂稳定化和水泥固化结合的方法处理锌渣是完全可行的。