用于恶劣天气条件下飞机着陆的雷达视景合成系统

描述了一种用于在恶劣天气情况下辅助飞机着陆的视景合成系统（ＳＶＳ），该系统由一个扫描毫米波雷达，平显和实时信号处理硬件组成，采用一套快速处理算法来增强和显示图像。该系统已在实际的恶劣天气情况进行了大量的高塔与飞行演示验证。此项工作的重要性在于它验证了系统的整体概念和信号处理算法的新颖性。     

The Suess-Urey mission (return of solar matter to Earth)

The Suess-Urey (S-U) mission has been proposed as a NASA Discovery mission to return samples of matter from the Sun to the Earth for isotopic and chemical analyses in terrestrial laboratories to provide a major improvement in our knowledge of the average chemical and isotopic composition of the solar system. The S-U spacecraft and sample return capsule will be placed in a halo orbit around the L1 Sun-Earth libration point for two years to collect solar wind ions which implant into large passive collectors made of ultra-pure materials. Constant Spacecraft-Sun-Earth geometries enable simple spin stabilized attitude control, simple passive thermal control, and a fixed medium gain antenna. Low data requirements and the safety of a Sun-pointed spinner, result in extremely low mission operations costs.     

Leg venous hemodynamics and leg volumes during a 42 day -6 degrees head-down bedrest

Seven healthy subjects were submitted to a 42-day head down bedrest, where leg venous compliance (venous distensibity index VDI) and leg volumes were assessed by mercury strain gauge plethysmography with venous occlusion and optoelectronic plethysmography, respectively. Plethysmographic and volometric measurements were made, before, during (at days 1, 4, 7, 14, 21, 26, 34 and 41), and after bedrest (days 1, 4, 7, 11 and 30 of the recovery period). Results showed a continuous decrease in leg volumes throughout bedrest, when VDI increased until day 26 of bedrest, and then decreased afterwards. The recovery period was characterized by a rapid return of VDI to prebedrest levels while leg volumes progressively normalised. These results showed that leg venous compliance changes are not always dependant upon skeletal muscle changes, and that factors other than size of muscle compartment are able to determine increases in leg venous compliance during long-term bedrest.     

The effect of head-down tilt on brain potentials related to visual attention

To study the possible effect of simulated weightlessness on brain function state, the brain event-related potentials (ERPs) in a simple visual selective response task were compared between HDT and HUT in 9 normal subjects. The results were: The Target(T) and non-Target(NT) flash signals both induced significant slow positive potentials which were supposed to related to the attention state; the amplitude of the positive potentials in frontal regions decreased significantly especially for NT-ERPs during HDT comprared with that during HUT. The data reported provide new evidence indicating that more attention should be paid on the brain function study during space flight.     

复合材料构件热压罐成型温度场研究

在热压罐固化工艺的热历程中,复合材料零件表面温度场分布的合理与否将直接决定产品的固化质量.以工字型零件和T型加筋壁板两种复合材料零件为研究对象,使用EC-3×8M和SCH-5.5×21M两种型号热压罐,同时选择炉温偶和零件偶两种控温方式对零件进行固化.通过分析温度场测试结果发现,控温方式、设备加热方式、升降温速率、热电偶的摆放位置、固化压力等因素均对零件的温度场有影响.     

等离子体气动激励抑制压气机叶栅角区流动分离的仿真与实验

进行了等离子体气动激励抑制低速压气机叶栅角区流动分离的数值仿真研究,并进行了实验验证.小攻角情况下,叶片吸力面角区流动分离导致显著的尾迹总压损失.来流速度为50 m/s(雷诺数为223 000)时,等离子体气动激励可以有效的抑制角区流动分离,降低总压损失.激励电压、频率分别为10 kV和22 kHz时,50%叶高处的尾迹压力分布基本不变,60%和70%叶高处的最大总压损失分别减小了13.83%和10.74%.增加激励电极组数或激励电压,可以增强抑制效果.      

喷流对飞机尾流涡影响的试验研究

飞机产生的尾流涡,特别是大尺度的翼尖涡,对尾随其后的飞行器是非常有害的,本文旨在探索利用飞机发动机产生的喷流加速尾流涡消亡的方法。试验采用简化的飞机模型(有尾翼),建立了包含一对翼尖涡及一对反向旋转的尾翼涡(通过以负迎角安装尾翼得到)的4涡尾流系统。在无外来扰动的情况下,不同的尾翼设置下得到的尾翼涡对翼尖涡的作用效果不同,有的能导致翼尖涡提前消亡,有的则不能。考察了不同强度的喷流对不同4涡尾流系统的影响,且作为对比,对无尾翼(2涡系统)及无喷流下的各种情况也分别作了观测。试验在拖曳水槽中进行,运用体视粒子图像测速(SPIV)技术,观测了与模型拖曳方向垂直的、从机翼后缘到下游约45翼展间均布的一系列切面。结果表明:当喷流直接作用于涡时,其效果主要取决于两者之间的初始距离及相对强度;而当喷流作用于整个4涡尾流系统时,其引入的扰动对不同的系统均能起到一定程度的改善作用,这种作用的关键在于利用喷流优化对翼尖涡进行扰动的机制,而不仅仅取决于喷流的强度。     

尾迹扫掠下超高负荷低压涡轮叶片附面层特性

利用表面热膜测量上游尾迹周期性扫掠下某超高负荷低压涡轮叶片吸力面附面层的非定常流动特性.通过热膜测得的准壁面剪切力及其统计参数云图分析了尾迹与附面层的相互作用对分离、转捩及再附过程的影响.实验结果表明:对于低雷诺数Re超高负荷产生较大分离泡的情形,尾迹扫掠对涡轮叶片附面层的发展具有显著影响,能够有效地抑制附面层的流动分离.