电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

电子工作台在模拟电子技术中的应用

本文简要地介绍了电子工作台的特点和使用方法，结合我们设计具体模拟电子线路的实践，说明了电子工作台在模拟电子技术中的应用。     

DNA damage and repair in oncogenic transformation by heavy ion radiation.

Energetic heavy ions are present in galactic cosmic rays and solar particle events. One of the most important late effects in risk assessment is carcinogenesis. We have studied the carcinogenic effects of heavy ions at the cellular and molecular levels and have obtained quantitative data on dose-response curves and on the repair of oncogenic lesions for heavy particles with various charges and energies. Studies with repair inhibitors and restriction endonucleases indicated that for oncogenic transformation DNA is the primary target. Results from heavy ion experiments showed that the cross section increased with LET and reached a maximum value of about 0.02 micrometer2 at about 500 keV/micrometer. This limited size of cross section suggests that only a fraction of cellular genomic DNA is important in radiogenic transformation. Free radical scavengers, such as DMSO, do not give any effect on induction of oncogenic transformation by 600 MeV/u iron particles, suggesting most oncogenic damage induced by high-LET heavy ions is through direct action. Repair studies with stationary phase cells showed that the amount of reparable oncogenic lesions decreased with an increase of LET and that heavy ions with LET greater than 200 keV/micrometer produced only irreparable oncogenic damage. An enhancement effect for oncogenic transformation was observed in cells irradiated by low-dose-rate argon ions (400 MeV/u; 120 keV/micrometer). Chromosomal aberrations, such as translocation and deletion, but not sister chromatid exchange, are essential for heavy-ion-induced oncogenic transformation. The basic mechanism(s) of misrepair of DNA damage, which form oncogenic lesions, is unknown.     

企业标准体系的建立与完善及对策

介绍企业标准体系的基本构成、特征和建立的原则,就建立完善的企业技术标准体系、制定企业管理标准体系和工作标准等阐述体系建立的途径,并对企业标准体系的管理、完善和改进等有关的几个问题进行探讨。     

减压活门性能试验台系统方案设计

主要介绍了减压活门性能试验台的实现机理、采用的方案。     

rom 15 sel

with primary goat embryonic fibroblast showed no difference from traditional feederlayer-based culture method used in mouse and human. The putative primary EG colonies were multilayer clumps ofcompact cel     

数控车削加工仿真系统结构研究

根据实际加工情况提出了一种虚拟NC车削加工的仿真系统的设计及实现原理。在Visual C++平台上利用OpenGL技术建立虚拟加工机床数字化模型,用C++语言实现物理仿真相关的各个数学模型的建立,进行虚拟环境下数控车削加工的几何仿真及物理仿真,实现产品的虚拟车削制造。     

INITIALIZATION METHODS FOR GROUP TRACKING

ＩＮＩＴＩＡＬＩＺＡＴＩＯＮＭＥＴＨＯＤＳＦＯＲＧＲＯＵＰＴＲＡＣＫＩＮＧＹａｎｇＣｈｅｕｇｙａｎｇ；ＱｕＪｉａｎｍｉｎｇ；ＭａｏＳｈｉｙｉ（ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，Ｂｅｉｊｎｇ，Ｃ...     

航天产品工艺定型阶段工艺文件的编制与审查

从编制《工艺定型标准化要求》、审定有关工艺定型文件和编写《工艺定型标准化审查报告》等方面浅述航天产品工艺定型阶段应做好的标准化文件的编制与审查,并对其工作内容作了介绍。