Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

Orbital stability close to asteroid 624 Hektor using the polyhedral model

We investigate the orbital stability close to the unique L4-point Jupiter binary Trojan asteroid 624 Hektor. The gravitational potential of 624 Hektor is calculated using the polyhedron model with observational data of 2038 faces and 1021 vertexes. Previous studies have presented three different density values for 624 Hektor. The equilibrium points in the gravitational potential of 624 Hektor with different density values have been studied in detail. There are five equilibrium points in the gravitational potential of 624 Hektor no matter the density value. The positions, Jacobian, eigenvalues, topological cases, stability, as well as the Hessian matrix of the equilibrium points are investigated. For the three different density values the number, topological cases, and the stability of the equilibrium points with different density values are the same. However, the positions of the equilibrium points vary with the density value of the asteroid 624 Hektor. The outer equilibrium points move away from the asteroid’s mass center when the density increases, and the inner equilibrium point moves close to the asteroid’s mass center when the density increases. There exist unstable periodic orbits near the surface of 624 Hektor. We calculated an orbit near the primary’s equatorial plane of this binary Trojan asteroid; the results indicate that the orbit remains stable after 28.8375?d.     

Sustained data recording system based on disk array

Most sustained data recording systems in many real-time fields are based on tape equipments. We have developed an innovative sustained data recording system based on disk array which consists of Array Controller Module (ACM), String Controller Module (SCM) and Main Controller Module (MCM). This system has a better performance and higher reliability than the traditional tape recorder and can be used conveniently in many areas of data recording, storing, playback, and remote backup. This novel recording system has been used in radar data recorder for spacecraft orbit tracking and satellite remote sensing data recording successfully.     

关于疲劳裂纹扩展数学模型的参数寻优

本文通过引入工程设计中的优化方法，分别对室内空气环境下铝合金（ＬＹ１２－ＣＺ）材料疲劳裂纹扩展的数学模型，以及环境条件下（３．５％ＮａＣｌ水溶液浸泡）该材料腐蚀疲劳裂纹扩展的数学模型进行了探讨。在已知标准试样在不同的环境下疲劳裂纹扩展实验ｄａｄＮｉ，ΔＫｉ的条件下，采用优化方法进行参数寻优，可方便地得到与其对应的疲劳裂纹扩展的ｄａｄＮ～ΔＫ最优数学模型     

项目教学法在《微机系统实现与维护》课程教学中的应用探索

项目教学法突破传统的教学模式,在参与项目完成的过程中学生能更好、更快地掌握所学知识,学习的积极性和主动性大大提高。本文将项目教学法的学习模式引入到高职高专的《微机系统实现与维护》课程教学中,对如何把理论与实践有机地结合,如何提高学生的技能水平作了一定的探索。     

数字式射击瞄准计算机设计与实现

某型射击军械系统的射瞄计算机原采用模拟机电式技术实现,存在体积大、功耗大、可靠性及可维护性差等缺点,因此,使用数字式计算机技术对其进行升级改造势在必行.本文首先对原系统的火控原理及火控构型的进行了分析;其次,介绍了射击瞄准计算机的对外接口关系.重点介绍了数字式射击瞄准计算机的采样解算时间的确定、计算方法的选取及接口设计等内容.本文所设计的数字式射击瞄准计算机已通过了系统验证并得到了使用,克服了原有系统所存在的固有缺点.文中的设计思想与所用的工程方法对类似武器系统的升级改造有所借鉴.     

故障检测与分离的广义一致性算子法

本文提出了故障检测与分离的广义一致性算子法的一般形式。得出了两个故障可分离的充要条件和多个故障可分离的充要条件。最后给出了检测和分离故障的过程。     

一种简易的码同步提取方法

描述一种码同步信号的提取方法。根据靶场工作的实际需要 ,在分析码同步器现状的基础上 ,通过深入探讨某型飞行器遥测信息流的特点 ,总结出一种利用 BIΦ码码型特点提取码同步信号的方法。这种简易实用的方法 ,不需要锁相环技术就可以稳定可靠地实现所需的功能     

基于DWDM光接入网的波长分配算法

本文介绍了一种基于DWDM光接入网的波长分配算法，该算法在保证基本服务质量的前提下，通过调度共享波长降低业务请求过程中的阻塞率。文中还对该算法进行了计算机仿真实验，仿真结果表明了该算法的有效性。