基于CFD高精度算法的雷电电磁场研究

雷电空间电磁场一直是电磁领域研究的热门，成熟的算法例如有限时域差分法（FDTD），传输线矩阵法（TLM）以及频域的矩量法（MoM）在计算雷电问题方面都有广泛的应用。由于计算流体力学（CFD）中的Euler方程与电磁学中的Maxwell方程有着相同的守恒形式，而且采用间断伽辽金方法（DG）已经在流场问题上得到广泛的尝试，因此引入了基于计算流体力学的DG方法来离散时域Maxwell方程，并采用网格分区并行技术加速计算，使用基于DG的圆球雷达散射截面积（RCS）算例进行测试，数值结果一致表明DG算法在求解电磁场问题上的可行性，之后通过计算一段近场雷电通道的电场分布并与解析解、某算法仿真解对比，数据基本吻合，说明该方法适合于雷电电磁场的计算。     

无线电遥测监视小直径刀具的工况过程

小直径刀具(φ6mm以下小钻头、铣刀)加工中产生的磨、破损信号难于检测。本文基于这一问题,研究采用无线电遥测技术来传输传感器信号,并建立了CIMS,FMS加工中心钻、铣用小直径刀具的工况监视系统。研究表明:用遥测技术传输的切削过程信息是可以用来识别刀具切削状态的;小直径刀具折断快速报警的成功率在90％以上。     

中板加热炉高效燃烧控制系统

介绍了控制系统在热值比较稳定的前提下,依靠控制加热炉排气中的残氧量以降低空燃比,达到降低排气热损失的目的,实现了加热炉节能降耗.     

航空制件超声检测中的声场特性分析

 针对航空制件超声检测中影响缺陷定量准确性的声场问题进行了深入讨论, 研究了脉冲波声场的计算方法, 设计了相应的计算软件并绘制出实用换能器声轴线上的声压分布曲线, 分析了不同材料和厚度的采样回波对频谱的影响, 比较了连续波声场和脉冲波声场的分布特性及异同点。研究结果为提高超声检测中缺陷定量的准确性和科学性提供了依据。     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

天基强银河背景下的空间碎片探测试验及分析

本文设计并完成了银河背景下碎片探测试验,数据分析表明,强的银河背景会降低探测器对暗弱碎片的探测能力,但对碎片的天文定位精度影响不大。本文验证了采用基于探测概率的极限探测星等方法表征探测器极限探测能力的合理性,以及基于仿真的方法增加数据完备度的可行性。本文的工作将为后续天基探测器的设计及探测试验的开展提供依据。     

海洋定位卫星性能分析

编队卫星是重要的空间设施,为保证编队卫星在空间复杂环境中的工作效率,需对编队卫星的工作原理、状态进行分析。以三星编队的海洋定位卫星为例,由于该编队卫星工作状态常受到星间基线、目标源位置、卫星高度等多种因素的制约,易造成定位模糊等问题。在评价海洋定位卫星性能方面,传统的方法主要着眼于定位精度,而忽略了定位迭代解算时间这一指标,而在特定的场景下(海上搜救、抢险救灾),较短的解算时间可以迅速找出目标源的概略位置。通过分析海洋定位卫星的时差测量定位原理,对定位误差精度进行了分析,提出水平精度因子(HDOP)和最小二乘迭代结合的评价方法,分析了影响卫星性能的因素,包括目标源相对几何位置、卫星高度及卫星几何构型等方面的影响。仿真结果表明:本文的设计可以提高卫星的定位效果,为定位卫星的参数设定提供参考。     

A global survey of COSMIC ionospheric peak electron density and its height: A comparison with ground-based ionosonde measurements

With a network of ground-based ionosondes distributed around the world, the ionospheric peak electron density and its height measured by FORMOSAT-3/COSMIC satellites in terms of GPS radio occultation technique are extensively examined in this article. It is found that, in spite of the latitude, the mean values of the peak electron density measured by COSMIC satellites are systematically smaller than those observed by ground-based ionosondes. The discrepancy between them is dependent on the latitude, namely, it is small in low and mid-latitudes and large in high-latitude region. Moreover, statistical analysis shows that the slopes of the regression line that is best fitted to the scatter diagram of occultation-retrieved peak electron density (ordinate axis) versus ionosonde-observed peak density (abscissa axis) are universally less than one. This feature is believed to be the result of path average effect of non-uniform distribution of the electron density along the GSP ray during the occultation. A comparison between COSMIC-measured peak height and ionosonde-derived peak height hmF2 indicates that the former is systematically higher than the latter. The difference in the two can be as large as 20% or more in equatorial and low-latitude regions. This result implies that the peak height hmF2 derived from the virtual height through true height analysis based on Titheridge method seems to underestimate the true peak height. The correlation between COSMIC and ionosonde peak electron densities is analyzed and the result reveals that correlation coefficient seems to be dependent on the fluctuation of the occultation-retrieved electron density profile. The correlation will be higher (lower) for the electron density profiles with smaller (larger) fluctuations. This feature suggests that the inhomogeneous distribution of the electron density along the GPS ray path during the occultation plays an important role affecting the correlation between COSMIC and ionosonde measurements.     

遗传算法结合神经网络的多段翼型优化设计研究

为提高多段翼型增升效能,开展包括襟／缝翼偏度和缝道参数在内的优化设计研究。将神经网络与遗传算法结合的优化设计方法应用于气动优化设计,并针对30P30N三段翼型,分别以8°迎角时升阻比最大和22°迎角时升力最大为目标进行了单目标和多目标优化设计研究。研究结果表明：采用单目标设计虽可在设计点获得较好的优化结果,但在非设计状态气动性能下降;采用多目标优化设计,既可获得良好的中等迎角升阻性能,又可改善大迎角失速性能,使综合气动性能更优;遗传算法与神经网络结合的优化设计方法可满足多段翼型的多点优化设计问题,具有高效、高精度等优点,易于工程应用。     

自治式水下机器人推进器故障检测、分离与重构

研究自治式水下机器人推进器故障检测、分离与重构问题。针对水下机器人故障诊断残差法中残差阈值不易选取的问题,提出了一种基于观测器的水下机器人推进器故障检测与分离方法,通过构建故障检测观测器对推进器故障与残差信号进行解耦,使推进器出现故障后仅引起与其相关的残差呈单调变化,从而可选择较大的阈值进行故障检测以提高诊断系统的可靠性,该方法在故障检测的同时可进行故障分离。针对系统不确定性导致的推进器故障重构精度低的问题,提出了一种RBF神经网络与等效输出注入相结合的故障重构方法,采用等效输出注入方法估计不确定性项,从神经网络输出中重构推进器故障。