Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

Performance evaluation for MAP state estimate fusion

This paper presents a quantitative performance evaluation method for the maximum a posteriori (MAP) state estimate fusion algorithm. Under ideal conditions where data association is assumed to be perfect, it has been shown that the MAP or best linear unbiased estimate (BLUE) fusion formula provides the best linear minimum mean squared estimate (LMMSE) given local estimates under the linear Gaussian assumption for a static system. However, for a dynamic system where fusion is recursively performed by the fusion center on local estimates generated from local measurements, it is not obvious how the MAP algorithm will perform. In the past, several performance evaluation methods have been proposed for various fusion algorithms, including simple convex combination, cross-covariance combination, information matrix, and MAP fusion. However, not much has been done to quantify the steady state behavior of these fusion methods for a dynamic system. The goal of this work is to present analytical fusion performance results for MAP state estimate fusion without extensive Monte Carlo simulations, using an approach developed for steady state performance evaluation for track fusion. Two different communication strategies are considered: fusion with and without feedback to the sensors. Analytic curves for the steady state performance of the fusion algorithm for various communication patterns are presented under different operating conditions.     

考虑辐射的化学平衡流驻点线解

本文用数值方法求解了化学平衡的高超声速粘性激波层驻点线流场。考虑了辐射和质量引射对流场的影响。辐射模型采用线和连续谱模型。文中讨论了引射率、头部半径、来流速度对壁面传热的影响。与有关文献结果比较表明,本文的方法是可行的。     

中山植物园植物定植图微机显示与管理系统

首先指出利用微机管理植物园取代落后的手工管理的意义。进而介绍了植物定植图微机显示与管理系统的具体实现途径，并描述了能将地图（含充色地图）、植物、宇符等录入。绘出，以及对植物进行检索显示等主要功能。     

正态分布可靠寿命经典近似限的改进

本文给出了正态分布可靠寿命的又一个经典近似下限，经验证，本文所给出的结果的精度比已有的结果精度要高，可提供给可靠性工程人员使用。     

反辐射导弹设计技术

反辐射导弹（ＡＲＭ）是一种利用雷达辐射源的电磁波，发现、跟踪并摧毁雷达系统的导弹。反辐射导弹的出现，使仅有“软”杀伤能力的电子战有了“硬”摧毁能力。论述了反辐射导弹的特点及其局限性，讨论了提高反辐射导弹性能的技术方法。这些技术包括：缩窄工作频带、采用比相比幅单脉冲侧向体制、数字化和集成化设计等。     

用拉氏量计和分析技术研究固体推进剂冲击波作用过程

本文建立了适合于研究固体推进剂冲击波作用过程的拉氏量计和分析技术,应用这种技术能清楚地表现固体推进剂内部状态变化过程和化学反应过程。并用这种技术研究了聚硫复合推进剂、丁羟复合推进剂、双基推进剂和改性双基推进剂冲击波转爆轰和爆轰过程。结果表明,复合推进剂与双基和改性双基推进具有明显不同的状态变化过程和化学反应过程。     

GPS空间分集接收机

为解决传统单天线GPS接收机在载体旋转情况下不能连续跟踪卫星连续定位和速度偏差较大的问题,提出一种GPS空间分集接收机设计方案。该接收机采用空间分集算法和消旋解算方法,能稳定连续地跟踪GPS卫星信号,并准确地求解出载体的平动速度。     

AP复合固体推进剂燃烧模型

本文提出了一个复合固体推进剂的综合燃烧模型和相应的数学处理方法。该模型对凝聚相反应作了更细微的分析,特别重视和强调了各种热量传递对燃烧所起的作用,并以推进剂中处于连续相的粘合剂线性分解速度表示推进剂的线性燃速。根据此模型编制程序并进行了大量计算。计算结果与实验符合得很好。对AP/HTPB多级配推进剂的计算结果中,相对误差小于10％的占80％,对Ae/AP/HTPB推进剂则占90％以上。