Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

电子工作台在模拟电子技术中的应用

本文简要地介绍了电子工作台的特点和使用方法，结合我们设计具体模拟电子线路的实践，说明了电子工作台在模拟电子技术中的应用。     

DNA damage and repair in oncogenic transformation by heavy ion radiation.

Energetic heavy ions are present in galactic cosmic rays and solar particle events. One of the most important late effects in risk assessment is carcinogenesis. We have studied the carcinogenic effects of heavy ions at the cellular and molecular levels and have obtained quantitative data on dose-response curves and on the repair of oncogenic lesions for heavy particles with various charges and energies. Studies with repair inhibitors and restriction endonucleases indicated that for oncogenic transformation DNA is the primary target. Results from heavy ion experiments showed that the cross section increased with LET and reached a maximum value of about 0.02 micrometer2 at about 500 keV/micrometer. This limited size of cross section suggests that only a fraction of cellular genomic DNA is important in radiogenic transformation. Free radical scavengers, such as DMSO, do not give any effect on induction of oncogenic transformation by 600 MeV/u iron particles, suggesting most oncogenic damage induced by high-LET heavy ions is through direct action. Repair studies with stationary phase cells showed that the amount of reparable oncogenic lesions decreased with an increase of LET and that heavy ions with LET greater than 200 keV/micrometer produced only irreparable oncogenic damage. An enhancement effect for oncogenic transformation was observed in cells irradiated by low-dose-rate argon ions (400 MeV/u; 120 keV/micrometer). Chromosomal aberrations, such as translocation and deletion, but not sister chromatid exchange, are essential for heavy-ion-induced oncogenic transformation. The basic mechanism(s) of misrepair of DNA damage, which form oncogenic lesions, is unknown.     

企业标准体系的建立与完善及对策

介绍企业标准体系的基本构成、特征和建立的原则,就建立完善的企业技术标准体系、制定企业管理标准体系和工作标准等阐述体系建立的途径,并对企业标准体系的管理、完善和改进等有关的几个问题进行探讨。     

减压活门性能试验台系统方案设计

主要介绍了减压活门性能试验台的实现机理、采用的方案。     

减小固体火箭外壳板滚弯直线度误差的研究

如何减小固体火箭外壳板滚弯直线度误差是目前火箭生产工艺中的难题,在对最不利实际工况下三轴辊弯板机中心辊进给量沿自身轴线分布规律作系统的分析、计算及研究的基础上,推导出一项箭壳板滚弯直线度误差不等式,并针对此项不等式各参数变化规律,提出几项减小箭壳板滚弯直线度误差的行之有效的措施,可供火箭外壳设计及生产工艺人员参考。     

Sustained data recording system based on disk array

Most sustained data recording systems in many real-time fields are based on tape equipments. We have developed an innovative sustained data recording system based on disk array which consists of Array Controller Module (ACM), String Controller Module (SCM) and Main Controller Module (MCM). This system has a better performance and higher reliability than the traditional tape recorder and can be used conveniently in many areas of data recording, storing, playback, and remote backup. This novel recording system has been used in radar data recorder for spacecraft orbit tracking and satellite remote sensing data recording successfully.     

数控车削加工仿真系统结构研究

根据实际加工情况提出了一种虚拟NC车削加工的仿真系统的设计及实现原理。在Visual C++平台上利用OpenGL技术建立虚拟加工机床数字化模型,用C++语言实现物理仿真相关的各个数学模型的建立,进行虚拟环境下数控车削加工的几何仿真及物理仿真,实现产品的虚拟车削制造。     

INITIALIZATION METHODS FOR GROUP TRACKING

ＩＮＩＴＩＡＬＩＺＡＴＩＯＮＭＥＴＨＯＤＳＦＯＲＧＲＯＵＰＴＲＡＣＫＩＮＧＹａｎｇＣｈｅｕｇｙａｎｇ；ＱｕＪｉａｎｍｉｎｇ；ＭａｏＳｈｉｙｉ（ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，Ｂｅｉｊｎｇ，Ｃ...     

现场动平衡技术在生产中的应用

利用美国恩泰克公司提供的DP1500数据采集仪及现场动平衡软件,以实例说明了现场动平衡技术在锅炉引风机、排粉风机、电动机、机泵等转动设备不平衡故障排除中的应用,介绍了不平衡故障的识别方法,揭示出该技术在生产中的实用性、先进性和经济性.