Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

一种应用于超小型无人机的新型定高传感器

使用美国ICSENSOR公司的压阻硅式绝压传感器，对静压进行测量，并设计出适合超小型无人机使用的新型定高传感器，这种定高传感器具有灵敏度高，重量轻，单电源供电，板式结构。可靠性高，重复性好的特点，填补了应用于超小型无人机的定高传感器产品的空白。     

Series of radiation-hardened, high efficiency converters for high voltage bus

A review of common switching techniques for dc/dc power conversion is presented. The evolution of the forward converter is discussed, leading naturally to the introduction of the double forward converter. Technical details for a series of radiation-hardened converters are then provided. This series was designed for space power management and distribution (PMAD) applications. The successful development of the PMAD converter demonstrated the viability of high voltage bus.     

FET振荡器注入锁相伏特拉级数分析

应用伏特拉级数法分析了电容耦合ＦＥＴ振荡系统在外加信号下的注入锁定现象，推导出输出信号和注入锁定带宽表达式。与一般非线性系统分析方法相比，伏特拉级数法在建立好系统模型后只需进行代数运算，从而避开了求解非线性，非齐次高阶微分方程的复杂过程。     

横航向驾驶员诱发振荡研究及地面模拟验证

本文建立了包括非线性环节在内的横航向驾驶员—操纵系统—飞机本体组合系统的数学模型,采用闭环控制原理,对JJ-7飞机横航向驾驶员诱发振荡PIO问题进行了研究,并详细地讨论了驾驶员参数及其各种操纵动作、操纵系统和飞机本体气动参数对横航向PIO的影响,探讨了横航向PIO产生的机理。文中以JJ-7飞机为例,采用时域法在整个飞行包线各点进行了检查,并用固基飞行模拟器进行模拟验证。其结果与理论计算结果相一致。     

独立函数的表达式及完备性

给出独立函数的逻辑表达式和递推关系式。证明了独立函数系的线性完备性。讨论逻辑函数关于独立函数系的展开式、不同极性独立函数系展式之间的关系,以及与Reed-Muller展式之间的关系。这些问题的结论为建立新型的通用逻辑模块奠定了理论基础。     

滑油量对恒速传动装置的影响

本文介绍了中外航空公司飞机发动机恒速传动装置几个故障典例及造成的危害,分析了填加滑油量不当对发动机恒速传动装置的影响,提出了预防措施。     

Sustained data recording system based on disk array

Most sustained data recording systems in many real-time fields are based on tape equipments. We have developed an innovative sustained data recording system based on disk array which consists of Array Controller Module (ACM), String Controller Module (SCM) and Main Controller Module (MCM). This system has a better performance and higher reliability than the traditional tape recorder and can be used conveniently in many areas of data recording, storing, playback, and remote backup. This novel recording system has been used in radar data recorder for spacecraft orbit tracking and satellite remote sensing data recording successfully.     

数控车削加工仿真系统结构研究

根据实际加工情况提出了一种虚拟NC车削加工的仿真系统的设计及实现原理。在Visual C++平台上利用OpenGL技术建立虚拟加工机床数字化模型,用C++语言实现物理仿真相关的各个数学模型的建立,进行虚拟环境下数控车削加工的几何仿真及物理仿真,实现产品的虚拟车削制造。