Facile Fabrication of Hierarchical Porous N/O Functionalized Carbon Derived from Blighted Grains Towards Electrochemical Capacitors

The hierarchical porous N/O co-functionalized carbon(HPNOC)was scalably prepared by using the lowcost and renewable blighted grains as the raw material coupled with mild KHCO_3 activation for electrochemical capacitors(ECs).The elemental N was in situ doped in the obtained HPNOC without any N-containing additives.Remarkably,the obtained HPNOC was endowed with a large specific surface area(about 2 624m~2·g~(-1)),high pore volume(about 1.35cm~3·g~(-1)),as well as high-content N/O functionalization(about 1.9%(in atom)N and about 10.2%(in atom)O.Furthermore,the as-resulted HPNOC electrode with a high mass loading of 5mg·cm~(-2 )exhibited competitive gravimetric capacitances of about 373.6F·g~(-1 )at 0.5A·g~(-1),and even about 260.4F·g~(-1 )at a high rate of 10A·g~(-1);superior capacitance retention of about 98.8%at 1A·g~(-1 )over 10 000consecutive cycles;and high specific energy of about 9.6W·h·kg~(-1 )at a power of 500W·kg~(-1),when evaluated as a promising electrode in 6mol KOH for advanced electrochemical supercapacitors.More encouragingly,the green synthetic strategy we developed holds a huge promise in generalizing for other biomass-derived carbon materials for versatile energy-related applications.     

电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

FET振荡器注入锁相伏特拉级数分析

应用伏特拉级数法分析了电容耦合ＦＥＴ振荡系统在外加信号下的注入锁定现象，推导出输出信号和注入锁定带宽表达式。与一般非线性系统分析方法相比，伏特拉级数法在建立好系统模型后只需进行代数运算，从而避开了求解非线性，非齐次高阶微分方程的复杂过程。     

横航向驾驶员诱发振荡研究及地面模拟验证

本文建立了包括非线性环节在内的横航向驾驶员—操纵系统—飞机本体组合系统的数学模型,采用闭环控制原理,对JJ-7飞机横航向驾驶员诱发振荡PIO问题进行了研究,并详细地讨论了驾驶员参数及其各种操纵动作、操纵系统和飞机本体气动参数对横航向PIO的影响,探讨了横航向PIO产生的机理。文中以JJ-7飞机为例,采用时域法在整个飞行包线各点进行了检查,并用固基飞行模拟器进行模拟验证。其结果与理论计算结果相一致。     

一种基于多点测距信息的复合制导方法

分析探讨了一种用于提高弹道式导弹对目标命中精度的复合制导方案，提出了通过进行多点测距，利用状态转移矩阵方法，来估计导弹落点偏差和末修级起控点飞行状态参数，然后再按照需要的速度进行末修级导引控制的复合制导方案，并通过仿真计算分析论证了该方法的可行性。     

电工电子线路虚拟实验室的建设与应用

虚拟技术的发展使电子线路的分析设计过程得以在计算机上轻松、准确、快捷地完成。这样,一方面克服了实验室在元器件和规格上的限制,避免了损坏仪器等不利因素,另一方面使得实验不受时间及空间的限制,从而促进电子线路实验教学的现代化。     

减压活门性能试验台系统方案设计

主要介绍了减压活门性能试验台的实现机理、采用的方案。     

新型精密狭缝的设计

介绍了一种基于弹性铰链的精密狭缝的设计，加工工艺要求和性能测试结果。根据实际需要，狭缝可以采用水冷结构。     

舰载机着舰时航迹稳定性研究

本文讨论了舰载飞机以小于有利速度着舰时的航迹稳定性问题。在分析飞机航迹稳定性的同时,还对油门杆控制、机动襟翼控制对改善航迹稳定性的作用进行了初步探讨;在此基础上还讨论了舰载飞机加装波束导引系统对着舰过程的影响原理。结果表明:采用油门杆控制、机动襟翼控制来改善着舰阶段的航迹稳定性是可行的:而且用以上两控制系统作为内环的自动驾驶仪在波束导引系统自动导引飞机着舰过程中,能控制飞机的飞行速度、高度,帮助驾驶员操纵。