钛合金表面抗激光涂层损伤特性及热效应影响研究

实验研究了钛合金和高反射型陶瓷涂层材料抗连续型激光烧蚀的损伤及温度分布特性，并从热效应影响角度对比分析了二者在抗激光损伤效果方面的差异性。研究结果表明：相比于钛合金，高反射型陶瓷涂层材料能有效增强钛合金基底抗激光损伤的能力；在同等激光功率密度辐照下，陶瓷涂层材料能有效提升钛合金基底耐受激光辐照的时间长度。实验结果表明该陶瓷涂层材料的激光损伤阈值比钛合金高约5.8倍。实验发现陶瓷涂层温升速率高于钛合金，但由于陶瓷材料具有较高的反射特性，以及良好的热吸收和热传导特性，因此能使由激光辐照产生的热量在其表面较快地扩散，而降低向基底方向传导的程度，最终提升陶瓷涂层的抗激光损伤阈值。     

基于复杂网络的车载自组织网络脆弱性分析

车载自组织网络(VANET)作为智能交通的重要基础应用，其安全稳定地运行是交通系统乃至社会经济可持续发展的需要。以最大连通度、连通分支平均规模、全局网络效率等参数为脆弱性测度指标，基于复杂网络理论，应用车辆仿真软件(VanetMobiSim)建立了VANET网络拓扑模型，详细研究了在随机攻击和蓄意攻击模式下脆弱性量化指标随节点移除比例的变化关系；通过仿真实验分析了节点密度、信号辐射半径及不同攻击策略对VANET脆弱性的影响。仿真结果表明:VANET在蓄意攻击下比较脆弱，基于节点介数的蓄意攻击效能最强；节点密度、信号辐射半径越小，VANET连通性越差，网络越脆弱。所提方法和结果为VANET拓扑控制优化和网络管理决策提供了理论依据。      

基于客流密度的地铁列车空调夏季送风温度控制模型研究

客流密度是影响地铁列车客室内热舒适性环境的重要因素,传统的地铁列车客室温度控制主要是根据UIC-553标准,以室内外温差作为控制核心.本文通过构建全尺寸地铁列车客室-乘客-空调送风耦合的一体化模型,利用实车试验与数值模拟相结合的方法,对地铁列车客室内的热舒适性展开研究.探讨客流密度对地铁列车客室内热舒适环境的影响规律以及不同客流密度下客室平均温度与空调送风温度之间的关系,得到了不同客流密度下能满足人体热舒适性体验的空调送风温度,提出了一种基于客流密度的地铁列车空调夏季送风温度控制模型.     

Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.