更高速(400+km/h)列车气动减阻技术发展与展望

合理有效的气动减阻技术是我国研发运营速度400+?km/h高速列车的过程需展开深入研究的重点内容.首先阐述了高速列车气动阻力的基本分布特征,并针对国外下一代更高速列车的气动减阻技术进行了调研,尤其分析了欧洲、日本和韩国的下一代更高速列车气动减阻技术的特征,总结了国外下一代高速列车气动减阻的关键技术与方法.然后根据列车气动减阻技术实施部位的差异,从列车头型优化以及转向架、受电弓和风挡等局部结构优化两个方面对我国目前高速列车气动减阻技术研究现状进行了分析和梳理,同时归纳了新型气动减阻技术的研究现状.最后在综合国外下一代更高速列车气动减阻技术与我国气动减阻技术研究的基础上,对我国更高速(400+?km/h)列车气动减阻技术中可行性较高且效果明显的发展方向进行了展望与建议,为我国更高速列车气动减阻技术的设计与发展提供有价值的参考.     

钛合金表面抗激光涂层损伤特性及热效应影响研究

实验研究了钛合金和高反射型陶瓷涂层材料抗连续型激光烧蚀的损伤及温度分布特性，并从热效应影响角度对比分析了二者在抗激光损伤效果方面的差异性。研究结果表明：相比于钛合金，高反射型陶瓷涂层材料能有效增强钛合金基底抗激光损伤的能力；在同等激光功率密度辐照下，陶瓷涂层材料能有效提升钛合金基底耐受激光辐照的时间长度。实验结果表明该陶瓷涂层材料的激光损伤阈值比钛合金高约5.8倍。实验发现陶瓷涂层温升速率高于钛合金，但由于陶瓷材料具有较高的反射特性，以及良好的热吸收和热传导特性，因此能使由激光辐照产生的热量在其表面较快地扩散，而降低向基底方向传导的程度，最终提升陶瓷涂层的抗激光损伤阈值。     

变势能阱双稳态气动弹性能量收集的性能增强研究

提出一种新型的磁耦合变势能阱双稳态压电颤振能量收集器，设计了外部磁场作用下颤振能量收集系统的双稳态构型，并利用弹性支撑的外部磁铁的运动实现了变势能阱技术，解释了变势能阱双稳态对颤振能量收集系统的性能增强机理。建立了磁力-压电-气动弹性耦合的颤振能量收集系统的动力学分析模型，根据非线性磁偶极模型以及平衡点稳定性理论，讨论了系统出现双稳态构型的参数条件。对磁耦合双稳态颤振能量收集系统的动态特性进行了数值仿真研究，结果显示，双稳态构型能够使无磁力颤振能量收集系统的超临界颤振行为转变为亚临界颤振，发生极限环振动的风速能够降低50%以上，拓宽了能量收集器的有效工作风速范围，并分析了磁铁间距、磁偶极矩对能量收集性能的影响规律。采用弹性支撑的外部磁铁的运动来自适应调节内外部磁铁之间的距离，达到变势能阱的目的，有效地降低了双稳态的势能阱深度，使系统更容易发生双稳态势能阱间的跃迁运动，从而在双稳态的设计基础上，实现了能量收集工作风速范围和输出电功率的同步提升，为低风速下的能量收集提供了一种有效的设计途径。     

双模块下颌式内转进气道/圆锥前体一体化布局研究

为实现三维内转进气道的内收缩流场与圆锥前体的外压缩流场的良好匹配，提出了一种双模块下颌式内转进气道/圆锥前体(Double-modules Chin Inward-turning Inlet and Conical Forebody，DCII/CF)一体化设计方法，获得一种新颖的双发并置、侧向安装的DCII/CF一体化布局。针对该布局形式，开展了DCII/CF一体化构型与传统的单模块内转进气道/圆锥前体(Single-module Inward-turning Inlet and Conical Forebody，SII/CF)一体化构型的数值对比研究。结果表明：DCII/CF一体化布局不仅为内转进气道提供了优秀的前体附面层排移效果，还有效避免了传统SII/CF布局中前体附面层与进气道内部流场之间的相互干扰。在Ma∞=6.0设计状态，DCII/CF一体化布局的进气道总压恢复系数相较传统的SII/CF布局有了显著提高，从0.403提高至0.482；但由于前体附面层的排移，该布局的捕获流量略有降低， SII/CF的流量系数为0.956，该布局则为0.917。而在非设计状态，该布局形式同样具备较好的总压恢复性能，在Ma∞=5.0与Ma∞=4.0的总压恢复系数分别达到了0.586和0.682，明显高于SII/CF的总压恢复系数0.507和0.619。     

Optical Design for a Cubesat: Unobscured Telescope,Using Freeform Mirrors and a Curved Detector

The possibility of constructing an optical scheme of a telescope for a small satellite based on mirrors with freeform surfaces and a curved photodetector is considered. It is shown that the use of a new element base allows the effective area of the main mirror to be maximized and the field of view up to 9.4 times to be increased in comparison with the classical scheme of the Ritchey–Chretien scheme in ensuring the high image quality.     

Differential GPS/inertial navigation approach/landing flight testresults

In November 1990, a differential GPS/inertial flight test was conducted to acquire a system performance database and demonstrate automatic landing using an integrated differential GPS/INS with barometric and radar altimeters. Flight test results obtained from postflight data analysis are presented. These results include characteristics of DGPS/inertial error, using a laser tracker as a reference. In addition, data are provided on the magnitude of the differential correlations and vertical channel performance with and without radar altimeter augmentation. Flight test results show one sigma DGPS/inertial horizontal errors of 9 ft and one sigma DGPS inertial vertical errors of 15 ft. Without selective availability effects, the differential corrections are less than 10 ft and are dominated by receiver unique errors over the time period of an approach. Therefore, the one sigma performance of the autonomous GPS (8-ft horizontal and 20-ft vertical) is very similar to the DGPS/inertial performance. Postprocessed results also demonstrate significant improvements in vertical channel performance when GPS/inertial is aided with radar altimeter along with a low-resolution terrain map     

Austrian dose measurements onboard space station MIR and the International Space Station--overview and comparison.

The Atominstitute of the Austrian Universities has conducted various space research missions in the last 12 years in cooperation with the Institute for Biomedical Problems in Moscow. They dealt with the exact determination of the radiation hazards for cosmonauts and the development of precise measurement devices. Special emphasis will be laid on the last experiment on space station MIR the goal of which was the determination of the depth distribution of absorbed dose and dose equivalent in a water filled Phantom. The first results from dose measurements onboard the International Space Station (ISS) will also be discussed. The spherical Phantom with a diameter of 35 cm was developed at the Institute for Biomedical Problems and had 4 channels where dosimeters can be exposed in different depths. The exposure period covered the timeframe from May 1997 to February 1999. Thermoluminescent dosimeters (TLDs) were exposed inside the Phantom, either parallel or perpendicular to the hull of the spacecraft. For the evaluation of the linear energy transfer (LET), the high temperature ratio (HTR) method was applied. Based on this method a mean quality factor and, subsequently, the dose equivalent is calculated according to the Q(LET infinity) relationship proposed in ICRP 26. An increased contribution of neutrons could be detected inside the Phantom. However the total dose equivalent did not increase over the depth of the Phantom. As the first Austrian measurements on the ISS dosimeter packages were exposed for 248 days, starting in February 2001 at six different locations onboard the ISS. The Austrian dosimeter sets for this first exposure on the ISS contained five different kinds of passive thermoluminescent dosimeters. First results showed a position dependent absorbed dose rate at the ISS.     

涡旋真空泵的密封设计

涡旋真空泵在工作过程中动、静涡盘之间间隙存在泄漏损失,它是影响涡旋真空泵工作性能的重要因素;总结了涡旋真空泵的工作原理;介绍了涡旋真空泵的密封设计与选择、间隙的确定。从材料和结构两方面阐述了密封的几种结构形式,说明了各自的工作原理,及需要注意的问题,阐明这些问题是影响泵性能指标的重要因素。     

Experimental study of damping properties of a composite torsion bar in the helicopter main rotor hingeless hub

The results of the experimental studies of damping characteristics of a composite torsion bar in the helicopter main rotor hingeless hub are presented. A variant of their improvement is considered.