Sustained data recording system based on disk array

Most sustained data recording systems in many real-time fields are based on tape equipments. We have developed an innovative sustained data recording system based on disk array which consists of Array Controller Module (ACM), String Controller Module (SCM) and Main Controller Module (MCM). This system has a better performance and higher reliability than the traditional tape recorder and can be used conveniently in many areas of data recording, storing, playback, and remote backup. This novel recording system has been used in radar data recorder for spacecraft orbit tracking and satellite remote sensing data recording successfully.     

Field formation around negatively biased solar arrays in the LEO-plasma

Heavy emission caused by impacting plasma ions results in a fast discharging effect of the initially large surface potentials on the dielectric solar cells. This eventually counteracts the energization process of the plasma ions to the cover glasses and leaves no significant electric fields. Thus, with an existing thermal plasma, electrons are again able to reach dielectric surfaces. Strong localized electric fields of the order of several 10 kV/cm form near the interconnector-cover glass interface.     

EUV emission from normal galaxies

Using data from the Wide Field Camera EUV all-sky survey, we have established upper limits to the EUV flux from a sample of 30 bright, nearby, non-active spiral galaxies. These galaxies were chosen to be those most likely to be detected in the EUV on the basis of (i) low interstellar absorption within our own galaxy, (ii) brightness in other wavebands, (iii) high star formation activity, and (iv) proximity. The derived EUV upper limits are restrictive, and establish for the first time that the EUV flux escaping from galaxies does not constitute a major component of their bolometric luminosity, and in particular that it cannot be the sink for the energy injected into the interstellar medium by supernova explosions, as had been suggested following the failure to detect this power in the X-ray band.     

四维下降飞行技术的研究与仿真：定常航迹角法下降剖面解算

本文研究的是四维飞行性能管理系统的核心环节－飞机在终端区域内的四维下降技术，首先探讨了基于常值航迹角的定常Ｍ数／指示空速下降飞行技术，论述了其高度剖面的构成与特点，通过尤拉积分方法求解飞机运动方程，实现了高度冲面的解算。其次开发了对速度剖面的迭代过程，选取原则及方法。本文在进行理论分析的同时，还开发了满意的仿真软件，一了其应用价值。     

振动系统反共振点的力谱预示

通过结构模态试验和小量级振动试验,获得有效反应真实结构特性的有限元模型,并利用简化的两自由度振动系统和小量级试验数据分析,预示出振动系统在反共振点进行力限(加速度带谷)的条件。为工程中抑制过试验问题,进行力限条件控制提供了重要依据和参考。     

发动机进气动态畸变测量系统与数据处理

本文介绍了动态畸变测量系统及其数据处理方法.进一步提高采样频率后可将该系统用于飞机和发动机的研究中.     

8mm辐射计特性参数测试及定标

文中简介了小口径天线毫米波辐射计定标系统的设计原理、结构、输出亮温的计算模型 ,研究了从液氮温度到室温范围内进行多点定标的方法 ,并对 8mm辐射计进行了特性参数测试及定标实验 ,得出了微波辐射计的定标方程和灵敏度、线性度、稳定度以及积分时间等指标。在该系统上按给定的程序进行定标 ,精度为 1 .0 6K。     

叉流管－管型换热器二维温度场的数值分析

建立并导出叉流管－管型换热器传热过程的二维数学模型及相应的差分格式,对比实验数据和性能计算结果,表明数值方法是有效可行的。据此编制的计算机程序已成功地用于组合发动机空气预冷换热器工作过程的预测。     

三维曲线坐标系N－S方程通用形式和数字解

运用张量分析理论,比较简捷地导出了三维任意曲线坐标系上椭圆型Ｎ－Ｓ方程的通用形式。在对这些方程进行数值离散时,采用了有限控制体积的非交错网格设置,该算法以ＳＩＭＰＬＥ为基础,为了抑制压力振荡场的出现,在压力修正方程中对压力梯度的离散附加一项１—δｘ的差分。作为算例,本文给出了三维９０°强曲率弯曲管道中气流的不可压缩紊流状态的数值计算结果,并与相关的实验数据进行了对比,结果是满意的。     

长空无人机起飞车航向稳定系统

本文详细讨论了长空无人机起飞车航向稳定系统。内容包括系统的基本构成;系统的工作原理,点刹形成的原因;系统抗干扰能力及稳定精度的仿真试验;系统中典型电路工作原理的介绍,系统的调试方法及注意事项。最后给出一组有代表性的滑行试验数据。结果说明系统抗干扰能力强、稳定精度达到了设计要求。