Space Astronomy in China:2002-2004

More and more proposals, or potential projects have been proposed in recent two years. We try to briefly outline these new proposals, although most of them are in fact only in their conception studies. The progress of previously mentioned projects, like Space Solar Telescope (SST), the Hard X-ray Modulation Telescope (HXMT), as well as newly initiated LUnar Resource Explorer (LUREX), will be introduced elsewhere.     

Subspace array processing for the suppression of FM jamming in GPS receivers

The mitigation of FM interference in GPS receivers is considered. In difference to commonly assumed wideband and narrowband interferers, the FM interferers are wideband, but instantaneously narrowband, and as such, have clear time-frequency (TF) signatures that are distinct from the GPS coarse acquisition (C/A) spread spectrum code. In the proposed technique, the estimate of the FM interference instantaneous frequency (IF) and the interference spatial signature are used to construct the spatiotemporal interference subspace. The IF estimates can be provided using existing effective linear or bilinear TF methods. The undesired signal arrival is suppressed by projecting the input data on the interference orthogonal subspace. With a multisensor receiver, the distinctions in both the spatial and TF signatures of signal arrivals allow effective interference suppressions. The deterministic nature of the signal model is considered and the known underlying structure of the GPS C/A code is utilized. We derive the receiver signal-to-interference-plus-noise ratio (SINR) under exact and perturbed IF values. The effect of IF estimation errors on both pseudorange measurements and navigation data recovery is analyzed. Simulation results comparing the receiver performances under IF errors in single and multiantenna GPS receivers are provided.     

超声波法测量燃速初探

针对国内首次引进的超声波实时燃速测量系统编写了测试软件,用水作为被测试对象,进行了退移速率测量,分析了超声波测量燃速的主要影响因素。结果表明,测量精度主要受材料中声速的约束,声速会受到材料应力(压强)和温度的影响。该软件可以用于厚度、材料内声速和实时燃速测量。     

离箱扰动和折叠翼展开数学模型研究

根据箱式发射导轨与导弹，导弹与折叠翼的约束特点，应用动力学普遍定理和解除约束原理，创建了离箱扰动运动数学模型和拆卸叠翼展开过程计算数学模型，并将计算结果与飞行试验结果作了比较。     

数据采集系统的总体评价

从性能指标出发，综述了数据采集系统总结评价技术的发展状况。并提出了对数据采集系统性能指标的两类分类方法 。     

大直径D406A钢圆筒旋压试验研究

简要介绍了大直径(φ1200mm)D406A钢圆筒旋压工艺试验过程,对旋压道次的安排及工艺参数的选择进行了工艺试验,最终摸索出了较佳的工艺参数,旋压出了合格的圆筒,对其它规格型号的圆筒旋压具有参考意义。     

非线性系统的高阶线性化方法及其在二阶摄动制导中的应用

本文讨论了非线性系统相对于标称轨道的高阶线性化方法。文中在一阶线性展开的基础上,提出了高阶误差项的补偿方法,导出了计算二阶补偿项系数的线性方程组,并给出了补偿项的计算公式。然后,采用所得方法研究了飞行器的二阶摄动制导方法。     

炭/炭复合材料防氧化涂层研究进展

介绍了近两年国内外开发的几种C/C复合材料高性能抗氧化涂层的微观结构和高温氧化行为,表明SiC-Al2O3-莫来石、SiC晶须增韧陶瓷、硅酸钇等涂层1500℃静态空气环境下均具有长时间防氧化能力,部分涂层还具有优良的抗热震性能。其中采用原位形成法制备的硅酸钇涂层具有极佳的抗氧化性能,可在1600℃空气中对C/C复合材料有效保护200 h。此外,还介绍了部分涂层的失效机理,并就C/C复合材料抗氧化涂层下一步研究重点提出一些见解。     

N2O-C2H2火焰原子吸收光谱法测定纯镍中硅含量

为简化纯镍中硅含量的测定过程,提高测量精度,研究了一种N2O-C2H2火焰原子吸收光谱法用于检测。介绍了方法的原理、工作参数和测定条件,并确定最佳工作条件,讨论了燃烧温度、共存离子等干扰因素的影响。实验结果表明,该法的灵敏度高、干扰小、选择性和重现性好,操作简单,分析周期短。其测定结果的相对标准偏差均小于1.0%,标准加入回收率大于97.0%(样本数n=6),可满足实验室仪器分析质量与控制的要求。