基于CFD高精度算法的雷电电磁场研究

雷电空间电磁场一直是电磁领域研究的热门，成熟的算法例如有限时域差分法（FDTD），传输线矩阵法（TLM）以及频域的矩量法（MoM）在计算雷电问题方面都有广泛的应用。由于计算流体力学（CFD）中的Euler方程与电磁学中的Maxwell方程有着相同的守恒形式，而且采用间断伽辽金方法（DG）已经在流场问题上得到广泛的尝试，因此引入了基于计算流体力学的DG方法来离散时域Maxwell方程，并采用网格分区并行技术加速计算，使用基于DG的圆球雷达散射截面积（RCS）算例进行测试，数值结果一致表明DG算法在求解电磁场问题上的可行性，之后通过计算一段近场雷电通道的电场分布并与解析解、某算法仿真解对比，数据基本吻合，说明该方法适合于雷电电磁场的计算。     

基于DLatLRR与VGG Net的红外与可见光图像融合

针对红外与可见光图像融合中特征损失严重、显著目标不突出的问题，提出了一种低秩表示分解与深度神经网络相结合的图像融合算法。首先，对源图像进行潜在低秩表示分解（DLatLRR），得到相应的低秩部分、显著部分及稀疏噪声。然后，分别采用16层的VGG Net模型和联合特征加权算法对低秩部分与显著部分进行融合，舍弃二者的稀疏噪声。最后，对融合得到的低秩部分和显著部分进行图像重建，得到最终的融合图像。实验结果表明:与其他算法进行比较，所提算法能够对图像的深层次细节特征进行融合，突出场景中的感兴趣区域，且融合图像的相关差异和、结构相似性、线性相关度等多种客观指标均有所提升，提升最大值分别为0.73、0.15、0.11，噪声产生率的最大缩减值为0.041 2。      

基于客流密度的地铁列车空调夏季送风温度控制模型研究

客流密度是影响地铁列车客室内热舒适性环境的重要因素,传统的地铁列车客室温度控制主要是根据UIC-553标准,以室内外温差作为控制核心.本文通过构建全尺寸地铁列车客室-乘客-空调送风耦合的一体化模型,利用实车试验与数值模拟相结合的方法,对地铁列车客室内的热舒适性展开研究.探讨客流密度对地铁列车客室内热舒适环境的影响规律以及不同客流密度下客室平均温度与空调送风温度之间的关系,得到了不同客流密度下能满足人体热舒适性体验的空调送风温度,提出了一种基于客流密度的地铁列车空调夏季送风温度控制模型.     

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.