Satellite mobile communications spread-spectrum receiver

Since 1999, ESA has conducted a number of system studies and technological developments to support the European and Canadian industry in the definition of a Satellite UMTS (S-UMTS) component development strategy, identifying critical technological areas and promoting S-UMTS demonstrations. In particular, the MUSIC project has successfully demonstrated advanced digital signal processing techniques to mitigate CDMA interference in spread-spectrum receivers, thus increasing the capacity and/or quality of service of a wireless communication network. The low-complexity solution for interference mitigation investigated and developed in the project is particularly suited for being implemented in mobile terminals.     

High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

侧链含硝基氮杂基团的聚醚粘合剂的性能及应用──新型硝基粘合剂研究Ⅲ

对新型的侧链含硝基氨杂基因的富能聚醚粘合剂──端羟基２─甲硝胺基乙基缩水甘油醚均聚醚（ＮＰＥ—Ａ）和端羟基共聚醚（ＮＰＥ—Ｂ）的性能进行了研究。结果表明，ＮＰＥ的热稳定性和化学稳定性良好，优于普通碳氢聚醚粘合剂（ＨＣＰＥ）和新型氟碳聚醚粘合剂（ＦＣＰＥ）；其固化后的力学性能良好。简要地叙述了以ＮＰＥ—Ｂ为粘合剂的固体火箭推进剂的配方和性能。     

振动系统反共振点的力谱预示

通过结构模态试验和小量级振动试验,获得有效反应真实结构特性的有限元模型,并利用简化的两自由度振动系统和小量级试验数据分析,预示出振动系统在反共振点进行力限(加速度带谷)的条件。为工程中抑制过试验问题,进行力限条件控制提供了重要依据和参考。     

卫星射频接收机电磁兼容防护设计方法

射频接收机是卫星测控、导航、有效载荷等分系统的重要组成设备,也是对电磁干扰最为敏感的设备,在对卫星进行电磁兼容性（EMC）设计时,必须充分考虑射频接收机的EMC防护,以保证其在卫星电测、发射和在轨运行时能够在其所处电磁环境中正常工作.文章描述了卫星射频接收机典型的EMC防护设计方法,从屏蔽、电磁泄露防护和天线耦合防护等方面进行了阐述.     

三维曲线坐标系N－S方程通用形式和数字解

运用张量分析理论,比较简捷地导出了三维任意曲线坐标系上椭圆型Ｎ－Ｓ方程的通用形式。在对这些方程进行数值离散时,采用了有限控制体积的非交错网格设置,该算法以ＳＩＭＰＬＥ为基础,为了抑制压力振荡场的出现,在压力修正方程中对压力梯度的离散附加一项１—δｘ的差分。作为算例,本文给出了三维９０°强曲率弯曲管道中气流的不可压缩紊流状态的数值计算结果,并与相关的实验数据进行了对比,结果是满意的。     

Parametric Rao Test for Multichannel Adaptive Signal Detection

The parametric Rao test for a multichannel adaptive signal detection problem is derived by modeling the disturbance signal as a multichannel autoregressive (AR) process. Interestingly, the parametric Rao test takes a form identical to that of the recently introduced parametric adaptive matched filter (PAMF) detector for space-time adaptive processing (STAP) in airborne surveillance radar systems and other similar applications. The equivalence offers new insights into the performance and implementation of the PAMF detector. Specifically, the Rao/PAMF detector is asymptotically (for large samples) a parametric generalized likelihood ratio test (GLRT), due to an asymptotic equivalence between the Rao test and the GLRT. The asymptotic distribution of the Rao test statistic is obtained in closed form, which follows an exponential distribution under the null hypothesis H ₀ and, respectively, a noncentral Chi-squared distribution with two degrees of freedom under the alternative hypothesis H ₁. The noncentrality parameter of the noncentral Chi-squared distribution is determined by the output signal-to-interference-plus-noise ratio (SINR) of a temporal whitening filter. Since the asymptotic distribution under H ₀ is independent of the unknown parameters, the Rao/PAMF asymptotically achieves constant false alarm rate (CFAR). Numerical results show that these results are accurate in predicting the performance of the parametric Rao/PAMF detector even with moderate data support.     

提高压电式直线电机推力新技术

介绍了蠕动式、脉冲式、行波式及表面波式等几种压电直线电机的改进措施和进展情况,其中微脊式蠕动直线电机和表面波直线电机极有可能成为今后压电直线电机的商品化市场的新产品方向。     

飞机设计中的新指标—战斗恢复力

本文介绍了飞机战斗恢复力的主要特征,着重探讨了设计中提高飞机战斗恢复力的措施,旨在为以后飞机设计方案论证提供一个参考依据。     

软件技术专业“订单式”人才培养模式的探索和实践

本文从“订单式”人才培养模式的客观需求入手,依据课题的研究和实践经验,综述了软件技术专业“订单式”人才培养的开展过程,分析了“订单式”人才培养模式的关键问题并提出了解决方案。