变势能阱双稳态气动弹性能量收集的性能增强研究

提出一种新型的磁耦合变势能阱双稳态压电颤振能量收集器，设计了外部磁场作用下颤振能量收集系统的双稳态构型，并利用弹性支撑的外部磁铁的运动实现了变势能阱技术，解释了变势能阱双稳态对颤振能量收集系统的性能增强机理。建立了磁力-压电-气动弹性耦合的颤振能量收集系统的动力学分析模型，根据非线性磁偶极模型以及平衡点稳定性理论，讨论了系统出现双稳态构型的参数条件。对磁耦合双稳态颤振能量收集系统的动态特性进行了数值仿真研究，结果显示，双稳态构型能够使无磁力颤振能量收集系统的超临界颤振行为转变为亚临界颤振，发生极限环振动的风速能够降低50%以上，拓宽了能量收集器的有效工作风速范围，并分析了磁铁间距、磁偶极矩对能量收集性能的影响规律。采用弹性支撑的外部磁铁的运动来自适应调节内外部磁铁之间的距离，达到变势能阱的目的，有效地降低了双稳态的势能阱深度，使系统更容易发生双稳态势能阱间的跃迁运动，从而在双稳态的设计基础上，实现了能量收集工作风速范围和输出电功率的同步提升，为低风速下的能量收集提供了一种有效的设计途径。     

基于DLatLRR与VGG Net的红外与可见光图像融合

针对红外与可见光图像融合中特征损失严重、显著目标不突出的问题，提出了一种低秩表示分解与深度神经网络相结合的图像融合算法。首先，对源图像进行潜在低秩表示分解（DLatLRR），得到相应的低秩部分、显著部分及稀疏噪声。然后，分别采用16层的VGG Net模型和联合特征加权算法对低秩部分与显著部分进行融合，舍弃二者的稀疏噪声。最后，对融合得到的低秩部分和显著部分进行图像重建，得到最终的融合图像。实验结果表明:与其他算法进行比较，所提算法能够对图像的深层次细节特征进行融合，突出场景中的感兴趣区域，且融合图像的相关差异和、结构相似性、线性相关度等多种客观指标均有所提升，提升最大值分别为0.73、0.15、0.11，噪声产生率的最大缩减值为0.041 2。      

基于鸽群优化算法的实时避障算法

为保证机器人能安全无碰撞地抵达目标位置，提出一种在改进版圆形扩张（CSE+）法中融合鸽群优化算法的实时避障算法。所提算法引入对障碍物密集程度的判断机制，在障碍分布密集时选择最安全的路径，在障碍物分布稀松的环境中，利用鸽群优化算法在安全范围内寻找下一目标最优位置。此外，还引入了搜索树，可实现死角的检测与避免。仿真结果显示:所提避障算法能提高路径规划的性能，在障碍物分布稀松时效果更加明显，且可实现死角检测并能通过狭长通道。      

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

拉扭疲劳试验机同步校准技术研究

介绍了一种新型力值、扭矩多分量传感器，在此传感器的基础上，研究力值、扭矩两参数同步校准技术，从而实现了对拉扭疲劳试验机的系统校准，解决了以往分参数校准存在不可靠性的难题，保证了拉扭疲劳试验机各参数整体系统的准确性。     

电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

Orbital stability close to asteroid 624 Hektor using the polyhedral model

We investigate the orbital stability close to the unique L4-point Jupiter binary Trojan asteroid 624 Hektor. The gravitational potential of 624 Hektor is calculated using the polyhedron model with observational data of 2038 faces and 1021 vertexes. Previous studies have presented three different density values for 624 Hektor. The equilibrium points in the gravitational potential of 624 Hektor with different density values have been studied in detail. There are five equilibrium points in the gravitational potential of 624 Hektor no matter the density value. The positions, Jacobian, eigenvalues, topological cases, stability, as well as the Hessian matrix of the equilibrium points are investigated. For the three different density values the number, topological cases, and the stability of the equilibrium points with different density values are the same. However, the positions of the equilibrium points vary with the density value of the asteroid 624 Hektor. The outer equilibrium points move away from the asteroid’s mass center when the density increases, and the inner equilibrium point moves close to the asteroid’s mass center when the density increases. There exist unstable periodic orbits near the surface of 624 Hektor. We calculated an orbit near the primary’s equatorial plane of this binary Trojan asteroid; the results indicate that the orbit remains stable after 28.8375?d.