Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

轻便风速表检定装置不确定度的测试与评定

根据GJB/J2 74 9《建立测量标准技术报告的编写要求》 ,结合气象计量的实际情况 ,给出了轻便风速表检定装置不确定度的测试与评定方法。     

氢/空气超音速燃烧自燃规律的实验研究

对平行喷射氢／空气超音速燃烧自燃规律进行了实验研究。主流空气用氢和空气燃烧补氧的方式加热到温度1000～2100K，压力0．8～1．6MPa。发现滞止温度、滞止压力和燃烧室内部构型等都对自燃有影响，特别是滞止温度和内壁构型的影响非常大。研究了四种试验段构型的自燃规律，找到了它们的自燃极限条件。对于光滑内壁构型，当温度接近自燃极限时，发现了有兴趣的现象并作了讨论。     

在火箭发动机燃烧室中气相湍流流动的理论计算

本文用单流体湍流模型对液体火箭发动机突扩燃烧室中冷态气相流动的速度场和湍流强度分布进行了数值计算并与实验数据进行了对比和分析.     

翼型动失速和非定常载荷的综合翼型数据方法

本文给出受迫谐振翼型的动失速工程估算方法。本方法基于凤洞试验，综合分析翼型动、稳态特性之间的差别与动、稳态条件之间的关系，建立一套估算动、稳态特性之间差别的经验公式，修正稳态特性，得到相应的动态特性。用本方法计算了三种翼型不同动态条件（包括深失速和后掠）的动失速特性，并与测量和文献结果进行了比较，结果符合得相当好。     

A new structural reliability index based on uncertainty theory

The classical probabilistic reliability theory and fuzzy reliability theory cannot directly measure the uncertainty of structural reliability with uncertain variables,i.e.,subjective random and fuzzy variables.In order to simultaneously satisfy the duality of randomness and subadditivity of fuzziness in the reliability problem,a new quantification method for the reliability of structures is presented based on uncertainty theory,and an uncertainty-theory-based perspective of classical Cornell reliability index is explored.In this paper,by introducing the uncertainty theory,we adopt the uncertain measure to quantify the reliability of structures for the subjective probability or fuzzy variables,instead of probabilistic and possibilistic measures.We utilize uncertain variables to uniformly represent the subjective random and fuzzy parameters,based on which we derive solutions to analyze the uncertainty reliability of structures with uncertainty distributions.Moreover,we propose the Cornell uncertainty reliability index based on the uncertain expected value and variance.Experimental results on three numerical applications demonstrate the validity of the proposed method.     

高超声速飞行器自适应神经网络容错控制

针对高超声速飞行器巡航段执行器控制效益损失故障和卡死故障问题,基于高超声速飞行器纵向运动模型,将自适应算法与改进的径向基函数神经网络(RBFNN)方法相结合,设计了一种自适应神经网络容错控制器。所提出的容错控制方法具有无需估计执行器故障值的优点,且设计的控制算法结构简单,无需大量实时计算,可以快速处理故障的发生,确保系统在参数不确定、恒定或时变执行器故障与卡死故障情况下仍具有稳定跟踪能力。最后,仿真验证了该方法的有效性。     

可行SLP法在发动机在线优化中的应用

研究了航空发动机在线优化算法问题。基于序列可行方向法,提出了一种用于解决一般非线性优化问题改进的序列线性规划(SLP)在线优化算法——可行下降序列线性规划(FSLP)方法。其显著特点是通过适当的步长修正算法,在保证目标函数下降的同时,确保解的可行性。根据对偶理论证明了其核心算法的收敛性,对步长修正原理进行了数学分析,并详细介绍了算法实现途径。基于上述优化算法,以某型双转子涡扇发动机最大推力模式为仿真算例,验证了该算法在解决航空发动机在线优化问题时,相比传统的序列优化方法,在提高优化算法解的可行性方面效果更好。     

基于模糊PID控制的模型直升机自主返回系统

旨在设计一架具有自主返回模块及增稳模块的模型直升机,该直升机以C805IF020单片机作为机载部分控制器,运用无线收发模块实现与地面站的通信.本文介绍了模型直升机自主返回系统各模块的功能及实现,用系统辨识法分通道建立了直升机模型,详细描述了基于参数寻优的模糊自适应PID控制器的设计方法,运用Simulink进行性能分析...     

某战斗机高速全模颤振风洞试验研究

为了验证高速风洞全模颤振试验技术以及获取某战斗机颤振安全边界,运用风洞试验的方法研究了某战斗机全模颤振特性,重点考察了模型在支撑系统上的稳定性、安全性以及典型颤振特性。结果表明:采用悬浮支撑系统可以使颤振模型具有除轴向以外的5个方向的运动自由度以及较好的稳定性和安全性;跨声速时的非线性气动力与速压较高时的结构非线性对全机颤振特性有较大影响,导致模态参数与颤振稳定性参数随速压呈非线性变化;振动波形图显示了该模型颤振形式为缓和型颤振,验证了模型设计时的计算结果。