Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

吸尘器弯管连接头模具的设计

分析了吸尘器弯管连接头的结构特点,着重阐述了应用于本模具中的一种新颖的专用来解决大角度,长距离抽芯的连杆机构的工作原理。对模具设计过程中遇到的困难,如:小嵌件如何固定,很小的侧型芯如何固定于侧滑块上,及三个液压缸按顺序抽芯,圆弧型芯如何插入圆柱型芯2中等都作了详细的叙述与探讨。另外本论文还涉及到了主要成型零部件的加工问题。     

Performance evaluation for MAP state estimate fusion

This paper presents a quantitative performance evaluation method for the maximum a posteriori (MAP) state estimate fusion algorithm. Under ideal conditions where data association is assumed to be perfect, it has been shown that the MAP or best linear unbiased estimate (BLUE) fusion formula provides the best linear minimum mean squared estimate (LMMSE) given local estimates under the linear Gaussian assumption for a static system. However, for a dynamic system where fusion is recursively performed by the fusion center on local estimates generated from local measurements, it is not obvious how the MAP algorithm will perform. In the past, several performance evaluation methods have been proposed for various fusion algorithms, including simple convex combination, cross-covariance combination, information matrix, and MAP fusion. However, not much has been done to quantify the steady state behavior of these fusion methods for a dynamic system. The goal of this work is to present analytical fusion performance results for MAP state estimate fusion without extensive Monte Carlo simulations, using an approach developed for steady state performance evaluation for track fusion. Two different communication strategies are considered: fusion with and without feedback to the sensors. Analytic curves for the steady state performance of the fusion algorithm for various communication patterns are presented under different operating conditions.     

虚拟仪器在导弹指挥仪自动测试系统中的应用

介绍了一种基于虚拟仪器结构的导弹指挥仪自动测试系统,以及该系统的硬件配置和在Lab Windows/CVI环境下的软件模块化设计.     

中山植物园植物定植图微机显示与管理系统

首先指出利用微机管理植物园取代落后的手工管理的意义。进而介绍了植物定植图微机显示与管理系统的具体实现途径，并描述了能将地图（含充色地图）、植物、宇符等录入。绘出，以及对植物进行检索显示等主要功能。     

正态分布可靠寿命经典近似限的改进

本文给出了正态分布可靠寿命的又一个经典近似下限，经验证，本文所给出的结果的精度比已有的结果精度要高，可提供给可靠性工程人员使用。     

自由转子陀螺仪的伺服测试技术研究

自由转子陀螺仪是目前精度最高的一种陀螺仪,没有精密的力矩器,因此,只能采用双轴伺服法来辨识其漂移误差模型。介绍了双轴伺服测试法的基本原理,给出了双轴伺服转台的运动轨迹及重力矢量的变化规律。根据转台的运动特性,建立了自由转子陀螺仪的漂移误差模型,导出双轴伺服转台转角数据估计漂移误差模型系数的算法。从测试结果可以看出自由转子陀螺仪的长时间精度高,表明采用伺服测试法能够获得极高的测试精度,伺服转台可以作为测试自由转子陀螺仪精度的装置。     

一种新型级间分离技术研究

本文对一种含固体燃气发生器的级间分离技术进行了研究。首先给出了分离的总体方案，建立了级间段气体压强瞬变的数学模型和导弹两级的运动模型，并利用流体动力学软件对级间段充气过程进行了模拟。简要介绍了固体燃气发生器的设计，并给出燃气发生器装药的选取原则。最后通过对某型号导弹的计算，证明这种级间分离方案是可行的。     

一种改进的区域覆盖星座优化设计方法

为缩短区域覆盖星座优化设计的计算时间，对网格点仿真法进行了改进。在统计时间内，以解析法计算卫星覆盖时刻集，并采用遗传算法优化星座参数。仿真计算结果表明，本文改进方法的计算时间仅为优化前的百分之一。     

GPS空间分集接收机

为解决传统单天线GPS接收机在载体旋转情况下不能连续跟踪卫星连续定位和速度偏差较大的问题,提出一种GPS空间分集接收机设计方案。该接收机采用空间分集算法和消旋解算方法,能稳定连续地跟踪GPS卫星信号,并准确地求解出载体的平动速度。