Impact of rain on wave retrieval from Sentinel-1 synthetic aperture radar images in tropical cyclones

The main objective of our work was to investigate the impact of rain on wave observations from C-band (~5.3 GHz) synthetic aperture radar (SAR) in tropical cyclones. In this study, 10 Sentinel-1 SAR images were available from the Satellite Hurricane Observation Campaign, which were taken under cyclonic conditions during the 2016 hurricane season. The third-generation wave model, known as Simulating WAves Nearshore (SWAN) (version 41.31), was used to simulate the wave fields corresponding to these Sentinel-1 SAR images. In addition, rainfall data from the Tropical Rainfall Measuring Mission satellite passing over the spatial coverage of the Sentinel-1 SAR images were collected. The simulated results were validated against significant wave heights (SWHs) from the Jason-2 altimeter and European Centre for Medium-Range Weather Forecasts data, revealing a root mean square error (RMSE) of ~0.5 m with a 0.25 scatter index. Winds retrieved from the VH-polarized Sentinel-1 SAR images using the Sentinel-1 Extra Wide-swath Mode Wind Speed Retrieval Model after Noise Removal were taken as prior information for wave retrieval. It was discovered that rain did indeed affect the SAR wave retrieval, as evidenced by the 3.21-m RMSE of SWHs between the SAR images and the SWAN model, which was obtained for the ~1000 match-ups with raindrops. The raindrops dampened the wave retrieval when the rain rate was < ~5 mm/hr; however, they enhanced wave retrieval for higher rain rates. It was also found that the portion of the rain-induced ring wave with a wave number > 0.05 rad/m (~125 m wavelength) was clearly observed in the SAR-derived wave spectra.     

一种新的六端口测量系统自校准方法

提出了一种新的六端口自校准方法.本方法从六端口相对功率理论出发,导出了六端口系统常数的自校准方程,给出了求解系统常数初值的方法,并利用梯度法对方程组求解,仿真结果表明用一个匹配负载、四个失配负载就可以解出系统常数.     

CBERS-1卫星红外多光谱扫描仪扫描子系统

文章介绍了CBERS -1卫星红外多光谱扫描仪(IRMSS)关键部件扫描子系统研制与应用情况。     

Kevlar/Nomex蜂窝夹层结构表面粘贴镀铜箔聚酰亚胺薄膜的工艺研究

文章对Kevlar面板Nomex蜂窝夹层结构表面粘贴镀铜箔聚酰亚胺薄膜的工艺进行了研究,分析了工艺特点、工艺流程、工艺难点,以及针对工艺难点所采取的工艺措施,最后根据产品的研制情况给出结论。     

求解装箱问题的遗传算法

本文提出了两种求解装箱问题（ＢｉｎＰａｃｋｉｎｇ）的遗传算法。一种是简单遗传算法,它采用等长度字符代码编码方法,使用常规的遗传操作算子。另一种是混合遗传算法,它综合运用解装箱问题的ＦＦＤ（ＦｉｒｓｔＦｉｔＤｅ－ｃｒｅａｓｉｎｇ）近似算法和简单遗传算法。试算结果表明,由这两种遗传算法所得到的装箱方案较一些近似算法所得到的装箱方案都要好。     

0.1米低温风洞的设计

本文阐述了我国首次设计和建造的低温风洞的设计特点及共性能。这是一座以风扇驱动的闭口回流式风洞,用氮气作试验气体。试验段为0.1米的方形截面。计运转参数范围为:M=0.04～0.40,P_t=101.2 kPa～202.6kPa,T_t=79K～320K。试验时间为半小时。风洞壳体是用铝合金制造的,外部用超细玻璃棉绝热。风扇用交流电机拖动,转速用变频控制。     

疲劳裂纹扩展速率试验数据的可靠性分析模型

以指定ΔＫ下的ｄａ／ｄＮ服从对数正态分布为基础，提出３种ｄａ／ｄＮ试验数据统计处理方法；依据一组４０ＣｒＮｉＭｏ材料的ＣＴ试样的试验数据处理结果，对３方法进行了分析对比。     

轻型空间相机遮光罩组件的研制

文章介绍了空间遥感相机遮光罩的结构特点及其功能。重点介绍了一种用于可见-红外光谱仪上的轻型遮光罩,该仪器安装于2005年美国发射的火星勘测轨道飞行器(MRO)上。     

分集接收机鉴相算法研究与设计

从介绍分集接收机的基本工作原理入手,着重论述分集接收机中差模环的两种鉴相算法,并给出两种算法在使用FPGA实现时的资源占用情况,最后介绍了两种算法在实际工程中的应用。